Search

Abstract The thermal performance of the evacuated tube solar collector with WO 3 /Water Nanofluid was studied in this paper. The WO 3 nanoparticles were spherical with 90 nm diameter Three different volume fraction of WO 3 nanoparticles of 0.014%, 0.028%, and0.042% were examined at several mass flux rates of 0.013 kg/s.m2, 0.015 kg/s.m2 and 0.017 kg/s.m2. The stability of the nanofluid was checked. Experiments were performed in Budapest, Hungary on the latitude of 47°28′N and longitude of 19°03′E. The results showed that the temperature difference of the fluid increased up to 21% with adding WO 3 nanoparticles. The maximum heat gain at the solar irradiance of 900 W/m2 was raised up to 23% when WO 3 nanoparticles were used. The proportion of the growth of the heat removable factor for nanofluids comparing to water at the same mass flux rate is between 1.05 and 1.16. The results indicated that the efficiency of the evacuated tube solar collector enhanced with more nanoparticles added. The thermal-optical efficiency of the evacuated tube solar collector reached 72.8%. Highlights • A good stability WO 3 /water nanofluid was prepared at different volume fraction. • The collector outlet temperature and heat gain enhanced with 21% and 23%, respectively. • The ratio of the increase of the heat removable factor for nanofluids was between 1.05 and 1.16%. • The thermal-optical efficiency of the collector reached 72.83%. [ABSTRACT FROM AUTHOR]

Nanofluids are the most attractive mean to enhance the performance of heat transfer devices. Several types of nanoparticles were utilized as they have high thermal conductivity. Renewable energy makes use of these nanofluids special in solar collectors. Evacuated tube solar collector is one of the most utilized solar collectors in thermal applications. CeO 2 nanoparticles were used in the presented study. The mean diameter of CeO 2 was 25 nm. A stable CeO 2 /water was made. The stability was checked using Zeta potential machine. Experiments were carried out using three different volume concentration of CeO 2 nanoparticles of 0.015%, 0.025%, and 0.035%. The thermal performance of the evacuated tube solar collector was examined at different mass flux rates. Results showed that the temperature difference between inlet and outlet flow and absorbed energy increase when nanofluids are used. The volume fraction flow rate of 0.035% at the mass flux rate of 0.017 kg/s.m 2 had the maximum heat removable factor, the thermo-optical characteristic of the collector, and the thermal loss coefficient. The thermo-optical characteristic of the collector of tube solar corrector is raised up to 34%. [ABSTRACT FROM AUTHOR]

Using nanofluids in thermal energy devices, such as flat-plate solar collectors, is gradually making progress, and getting awareness in the scientific community. Experiments were performed to study the effect of using CeO 2 -water on the efficiency of flat-plate solar collector by three different volume fractions of CeO 2 nanoparticles of 0.0167%, 0.0333% and 0.0666%, while the mean particle dimension was kept constant at 25 nm. An ultrasonic process was used for maintaining the stability of the CO 2 -water nanofluid. The working fluid mass flux rates were 0.015, 0.018 and 0.019 kg/s m 2 . The experiments were carried out in Budapest, Hungary on the latitude of 47°28′N and longitude of 19°03′E. Higher collector efficiency was achieved when using CeO 2 -water nanofluid compared to results achieved with water application. Based on present data, the efficiency of the collector is directly proportional with the mass flux rate and with the volume fraction in the ranges of the present study. Experiments indicate that the highest rise in efficiency of the collector at zero value of [(T i  – T a )/G T ] is 10.74%, for volume fraction ( φ ) 0.066%, and for mass flux rate of 0.019 kg/s m 2 compared to water. [ABSTRACT FROM AUTHOR]

The investigation of nanofluids effects on the performance of solar energy devices has converted to an important topic of research in recent years. The present experimental study deals with the effects of using WO 3 /water nanofluids on the efficiency of a flat plate solar collector which operates under weather conditions of Budapest, Hungary. First, water based nanofluids containing WO 3 nanoparticles (with an average size of 90 nm) at three different volume fractions including 0.0167%, 0.0333%, and 0.0666% have been synthesized. The stability of nanofluids has been evaluated through Zeta potential tests which unveiled the prepared suspensions have high stability. In the next step, the thermal performance of the flat plate solar collector using nanofluids is investigated at different mass flux rates including 0.0156, 0.0183, and 0.0195 kg/s.m 2 . The results showed that adding WO 3 nanoparticles to water ameliorates the efficiency of the solar collector. The experiment results reveal that the maximum enhancement in efficiency of the collector at zero value of [(Ti–Ta)/G T ] was 13.48% for the volume fraction of 0.0666% and mass flux rate of 0.0195 kg/s.m 2 compared to water, which clearly shows the high potential of WO 3 nanoparticles for solar energy applications. [ABSTRACT FROM AUTHOR]

A CFD model was performed with commercial software through the adoption of the finite volume method and a SIMPLE algorithm. SiO2-P25 particles were added to water/ethylene glycol as a base fluid. The result is considered a new hybrid nanofluid (HN) for investigating heat transfer (HT). The volume concentrations were 0.5, 1.0, and 1.5%. The Reynolds number was in the range of 5000–17,000. The heat flux (HF) was 7955 W/m2, and the wall temperature was 340.15 K. The numerical experiments were performed strictly following the rules that one should follow in HT experiments. This is important because many studies related to nanofluid HT overlook these details. The empirical correlations that contain the friction factor perform better with higher Reynolds numbers than the correlations based only on Reynolds and Prandtl numbers. When temperature differences are moderate, researchers may consider using constant properties to lower computational costs, as they may give results that are similar to temperature-dependent ones. Compared with previous research, our simulation results are in agreement with the experiments in real time. [ABSTRACT FROM AUTHOR]

In the current research, surface-modified SiO2 nanoparticles were used upon immersion in an applied base fluid (ethylene glycol:water = 1:1). The atomic layer deposition method (ALD) was introduced to obtain a thin layer of TiO2 to cover the surface of SiO2 particles. After the ALD modification, the TiO2 content was monitored by energy dispersive X-ray spectroscopy (EDS). Transmission electron microscopy (TEM) and FT-IR spectroscopy were applied for the particle characterization. The nanofluids contained 0.5, 1.0, and 1.5 volume% solid particles and zeta potential measurements were examined in terms of colloid stability. A rotation viscosimeter and thermal conductivity analyzer were used to study the nanofluids' rheological properties and thermal conductivity. These two parameters were investigated in the temperature range of 20 °C and 60 °C. Based on the results, the thin TiO2 coating significant impacted these parameters. [ABSTRACT FROM AUTHOR]

In this paper, we present a study on thermal conductivity and viscosity of nanofluids containing novel atomic layer deposition surface-modified carbon nanosphere (ALD-CNS) and carbon nanopowder (ALD-CNP) core-shell nanocomposites. The nanocomposites were produced by atomic layer deposition of amorphous TiO2. The nanostructures were characterised by scanning (SEM) and transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, thermogravimetry/differential thermal analysis (TG/DTA) and X-ray powder diffraction (XRD). High-concentration, stable nanofluids were prepared with 1.5, 1.0 and 0.5 vol% nanoparticle content. The thermal conductivity and viscosity of the nanofluids were measured, and their stability was evaluated with Zeta potential measurements. The ALD-CNS enhanced the thermal conductivity of the 1:5 ethanol:water mixture by 4.6% with a 1.5 vol% concentration, and the viscosity increased by 37.5%. The ALD-CNS increased the thermal conductivity of ethylene–glycol by 10.8, whereas the viscosity increased by 15.9%. The use of a surfactant was unnecessary due to the ALD-deposited TiO2 layer. [ABSTRACT FROM AUTHOR]

Halloysite nanotube (HNT) which is cheap, natural, and easily accessible 1D clay, can be used in many applications, particularly heat transfer enhancement. The aim of this research is to study experimentally the pool boiling heat transfer (PBHT) performance of novel halloysite nanofluids at atmospheric pressure condition from typical horizontal heater. The nanofluids are prepared from halloysite nanotubes (HNTs) nanomaterials-based deionized water (DI water) with the presence of sodium hydroxide (NaOH) solution to control pH = 12 to obtain stable nanofluid. The nanofluids were prepared with dilute volume concentrations of 0.01–0.5 vol%. The performance of PBHT is studied via pool boiling curve and pool boiling heat transfer coefficient (PBHTC) from the typical heater which is the copper horizontal tube with a thickness of 1 mm and a diameter of 22 mm. The temperatures of the heated tube surface are measured to obtain the PBHTC. The results show an improvement of PBHTC for halloysite nanofluids compared to the base fluid. At 0.05 vol% concentration, HNT nanofluid has the best enhancement of 5.8% at moderate heat flux (HF). This indicates that HNT is a potential material in heat transfer applications. [ABSTRACT FROM AUTHOR]

A comparative research on stability, viscosity (µ), and thermal conductivity (k) of carbon nanosphere (CNS) and carbon nanopowder (CNP) nanofluids was performed. CNS was synthesized by the hydrothermal method, while CNP was provided by the manufacturer. Stable nanofluids at high concentrations 0.5, 1.0, and 1.5 vol% were prepared successfully. The properties of CNS and CNP nanoparticles were analyzed with Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), specific surface area (SBET), X-ray powder diffraction (XRD), thermogravimetry/differential thermal analysis (TG/DTA), and energy dispersive X-ray analysis (EDX). The CNP nanofluids have the highest k enhancement of 10.61% for 1.5 vol% concentration compared to the base fluid, while the CNS does not make the thermal conductivity of nanofluids (knf) significantly higher. The studied nanofluids were Newtonian. The relative µ of CNS and CNP nanofluids was 1.04 and 1.07 at 0.5 vol% concentration and 30 °C. These results can be explained by the different sizes and crystallinity of the used nanoparticles. [ABSTRACT FROM AUTHOR]

Nanofluids obtained from halloysite and de-ionized water (DI) were prepared by using surfactants and changing pH for heat-transfer applications. The halloysite nanotubes (HNTs) nanofluids were studied for several volume fractions (0.5, 1.0, and 1.5 vol%) and temperatures (20, 30, 40, 50, and 60 °C). The properties of HNTs were studied with a scanning electron microscope (SEM), energy-dispersive X-ray analysis (EDX), Fourier-transform infrared (FT-IR) spectroscopy, X-ray powder diffraction (XRD), Raman spectroscopy and thermogravimetry/differential thermal analysis (TG/DTA). The stability of the nanofluids was proven by zeta potentials measurements and visual observation. With surfactants, the HNT nanofluids had the highest thermal conductivity increment of 18.30% for 1.5 vol% concentration in comparison with the base fluid. The thermal conductivity enhancement of nanofluids containing surfactant was slightly higher than nanofluids with pH = 12. The prepared nanofluids were Newtonian. The viscosity enhancements of the nanofluid were 11% and 12.8% at 30 °C for 0.5% volume concentration with surfactants and at pH = 12, respectively. Empirical correlations of viscosity and thermal conductivity for these nanofluids were proposed for practical applications. [ABSTRACT FROM AUTHOR]