Search

In this research, thermal modeling has been done to investigate the effect of nanofluid on the performance of the linear parabolic collector. Therminol vapor/liquid phase fluid (VP-1) has been used as a base fluid; iron oxide nanoparticles have been used to produce mono-nanofluid; and iron oxide multi-walled carbon nanotubes nanocomposite has been used as nanoparticles to produce hybrid nanofluid. The fluid flow inside the absorber tube of the collector is assumed to be turbulent. The results show that when hybrid nanofluid and mono-nanofluid are used, the energy and exergy efficiencies of the collector are higher than those for the conditions of using the base fluid, but their amount is slightly lower with the use of hybrid nanofluid than when the working fluid is mono-nanofluid. According to the obtained results, the highest energy efficiency of the linear parabolic collector using nanofluid and mono-nanofluid is 70.2% and 70.4%, respectively, and the highest exergy efficiency is 35.7% and 35.9%, respectively. Despite this, the friction coefficient of mono-nanofluid compared to hybrid nanofluid was obtained on average about 9% higher. The results showed that the criterion for evaluating the performance of the collector (hydrodynamic thermal efficiency) when hybrid nanofluid is used is more than when mono-nanofluid is used. [ABSTRACT FROM AUTHOR]

Investigations on thin-film flow play a vital role in the field of optoelectronics and magnetic devices. Thin films are reasonably hard and thermally stable but quite fragile. The thermal stability of a thin film can be further improved by incorporating the effects of nanoparticles. In the current work, a stretchable surface is considered upon which hybrid nanofluid thin-film flow is taken into account. The idea of augmenting heat transmission by making use of a hybrid nanofluid is a focus of the current work. The flow is affected by variations in the viscous forces, along with viscous dissipation effects and Marangoni convection. A time-constrained magnetic field is applied in the normal direction to the flow system. The equations governing the flow system are shifted to a non-dimensional form by applying similarity variables. The homotopy analysis method is employed to find the solution to the resultant equations. It is noticed in this study that the flow characteristics decline with augmentation of magnetic, viscosity and unsteadiness parameters while they increase with enhanced values of thin-film parameters. Thermal characteristics are supported by increasing values of the Eckert number and the unsteadiness parameter and opposed by the viscosity parameter and Prandtl number. The numerical impact of different emerging parameters upon skin friction and the Nusselt number is calculated in tabular form. A comparison of current work with established results is carried out, with good agreement. [ABSTRACT FROM AUTHOR]

This study reports the three-dimensional (3D) flow of Ag-MgO hybrid nanofluid (HNF) over a spinning disc of flexible thickness in the presence of modified Fourier law. The HNF is contained of silver and magnetic nanoparticulate in the base fluid engine oil. The energy transition has been examined in the involvement of melting heat propagation. The highly nonlinear system of partial differential equations (PDEs) is processed by adopting the proper similarity conversions to attain the coupled ODE system. The obtained system of modeled equations is numerically solved by employing the Parametric Continuation Method (PCM). The nature of various constraints, as opposed to the velocities, energy, and mass transmission, is portrayed and described. In comparison to the simple nanofluid flow, the hybrid nanoliquid flow's velocity and heat conduction are observed to have a significant influence. As a result, the functionality of the hybrid nanoliquid is significantly superior to that of the conventional nanofluid. The positive variation in power-law exponent n and Reynold number Re significantly enhances the fluid velocity. The effect of both melting coefficient and thermal relaxation term reduces fluid temperature. [ABSTRACT FROM AUTHOR]

The hybrid nanofluid is extensively used in manufacturing commercial applications due to its high exceptional capacity to increase the heat transfer rate. As a result, in the existence of nonlinear convection, the hybrid nanofluid is considered to flow on an inclined plane. The nonlinear convection has many applications in real life and is more relevant to the natural flow avoiding the flow restrictions. The focus has been executed on the thermal and mass Grashof numbers to analyse the fluid motion in the presence of these parameters for nonlinear nature. Moreover, the hybrid nanofluid flow analysis has been done to investigate the heat transfer analysis. The modelled equations are solved through an analytical approach. The heat and mass transfer rates and drag force are calculated under the influence of various physical parameters. The new parameter of the Grashof numbers improves the fluid motion for its larger values, and consequently, the fluid rapidly falls down from the inclined plane. The obtained outputs show that hybrid nanofluids are more effective in heat transfer analysis as compared to other conventional fluids. [ABSTRACT FROM AUTHOR]

The current paper describes a Darcy-Forchheimer flow of Casson hybrid nanofluid through an incessantly expanding curved surface. Darcy-Forchheimer influence expresses the viscous fluid flow in the porous medium. Carbon nanotubes (CNTs) with a cylindrical form and iron-oxide are utilized to make hybrid nanofluids. Using Karman's scaling, the principal equations are rearranged to nondimensional ordinary differential equations. The "Homotopy analysis method" is used to further build up the analytic arrangement of modeled equations. The impact of flow variables on the velocity and temperature profiles has been tabulated and explained. The flow velocity is raised when both the curvature and volume fraction parameters are elevated. The temperature and velocity profiles exhibit the opposite tendency when the Forchheimer number is increased, since the fluid velocity decreases while the energy profile grows. The addition of CNTs and iron nanocomposites improves the thermophysical characteristics of the base fluid significantly. The obtained consequences show that hybrid nanofluids are more efficient to improve the heat transfer rate. Using CNTs and nanomaterials in the base fluid to control the coolant level in industrial equipment is a wonderful idea. [ABSTRACT FROM AUTHOR]