Search

Au nanoparticles of size ranging 2–6 nm were deposited over hexagonal CdS using three conventional metal deposition methods namely; deposition precipitation (DP), incipient wet impregnation (WI), photo-deposition (PD) and a recently reported KI method by our group [1]. The later involves reduction of Au 3+ ions with iodide ions. XRD results confirmed the formation of CdS hexagonal phase from as prepared cubic phase at 600 °C under the N 2 atmosphere. Transmission electron spectroscopy (TEM), diffused reflectance spectroscopy (DRS), X-Ray fluorescence (XRF), ICP-OES and photoreactions were conducted to study the effect of Au particle size, Au loading and Au plasmonic properties on H 2 production activity. It was found that surface plasmon resonance (SPR) is directly linked to Au particle size. Among all four methods, 3 wt.% Au deposited over hexagonal CdS by KI method with mean Au particle size of 4 nm showed highest performance for hydrogen production from water electrolyte mixture under visible light irradiation (>420 nm and a flux of 35 mW/cm 2 ). XPS results of Au/CdS prepared by KI method showed that Au is exclusively present in zero oxidation state before and after photocatalytic H 2 production testes indicating the stable nature of Au/CdS catalyst. The H 2 production activity of Au/CdS catalysts prepared by different metal deposition methods and H 2 production mechanism in a water-electrolyte is discussed in detail. [ABSTRACT FROM AUTHOR]

Graphitic carbon material encasing chromium oxide nanoribbons [Cr 2 O 3 –C composite] is obtained by carbonizing a mixture of furfuryl alcohol and Cr-BDC MOF [BDC: benzene dicarboxylic acid; Cr 3 F(H 2 O) 2 O[(O 2 C)C 6 H 4 –(CO 2 )] 3 ·nH 2 O] at 900 °C under inert atmosphere. The Ni–Pd nanoparticles synthesized by NaBH 4 reduction method are loaded on the Cr 2 O 3 –C support via sonication. Morphological, structural, and chemical analysis of the designed chromia based carbon support and synthesized nanoparticles is carried out with PXRD, EDX, SEM, HR-TEM and BET surface area. The gas adsorption analyses reveal that BET surface area of Cr 2 O 3 –C support decreases from 438 m 2 g −1 to 171 m 2 g −1 by the incorporation Ni–Pd nanoparticles. The electro-oxidation reaction of methanol is carried out over the designed electrocatalysts in acidic media. The Ni–Pd nanoparticles supported on Cr 2 O 3 –C have presented a significant increase in catalytic activity for methanol oxidation and tolerance in comparison to the nanoparticles supported on activated carbon and glassy carbon electrode. [ABSTRACT FROM AUTHOR]