Search

Calcium phosphate cement (CPC) is a self-setting, biocompatible and osteoconductive bone cement, however its use as a bone substitute is still limited owing to its low bioactivity (i.e. its slow in vivo resorption and slow new bone formation rate) which is a challenging issue to be addressed. Herein, we report for the first time highly bioactive bone cement microspheres formulated from a cement paste containing α-tricalcium phosphate microparticles (α-TCP) and mesoporous calcium silicate bioactive glass nanoparticles (mesoporous BGn) using a water-in-oil emulsion method. Indeed, bioactive microspheres possess high potential as bone defect fillers for bone regeneration. The α-TCP microparticles were prepared by a solid state synthesis at 1400 ºC while mesoporous BGn were synthesized by template-assissted ultrasound-mediated sol-gel method. The particle size distribution of as-prepared cement microspheres was in the range of 200 - 450 µm with a sphericity index in the range of 0.92 - 0.94. The surface morphology of α-TCP microspheres revealed α-TCP micoparticles with smooth surfaces whereas α-TCP/BGn microspheres unveiled nano-roughened α-TCP microparticles. The as-prepared α-TCP/BGn cement microspheres exhibited larger specific surface area ca 18.6 m 2 /g, sustained release of soluble silicate (SiO 4 4- ) ions (118 ppm within a week) and high protein adsorption capacity (252 mg/g). Notably, the α-TCP/BGn cement microspheres showed excellent in vitro surface bioactivity via formation of massive amounts of bone-like hydroxyapatite spherules and aggregates on their surfaces after soaking in simulated body fluid. Importantly, the in vivo implantation of as-prepared α-TCP/BGn cement microspheres in rat calvarial critical size bone defects for 6 weeks unveiled high in vivo bioactivity in terms of substantial new bone ingrowth and significant new bone formation within the bone defect as evidenced by histological analyses, X-ray radiography and micro-computed tomography evaluations., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Objective: This study was investigated the mechanophysical properties of zinc phosphate cement (ZPC) with or without the copper doped bioglass nanoparticles (Cu-BGn) and their biological effect on dental pulp human cells and bacteria., Materials and Methods: Cu-BGn were synthesized and characterized firstly and then, the experimental (Cu-ZPC) and control (ZPC) samples were fabricated with similar sizes and/or dimensions (diameter: 4 mm and height: 6 mm) based on the International Organization of Standards (ISO). Specifically, various concentrations of Cu-BGn were tested, and Cu-BGn concentration was optimized at 2.5 wt% based on the film thickness and overall setting time. Next, we evaluated the mechanophysical properties such as compressive strength, elastic modulus, hardness, and surface roughness. Furthermore, the biological behaviors including cell viability and odontoblastic differentiation by using dental pulp human cells as well as antibacterial properties were investigated on the Cu-ZPC. All data were analyzed statistically using SPSS® Statistics 20 (IBM®, USA). p < 0.05 (*) was considered significant, and 'NS' represents nonsignificant., Results: Cu-BGn was obtained via a sol-gel method and added onto the ZPC for fabricating a Cu-ZPC composite and for comparison, the Cu-free-ZPC was used as a control. The film thickness (≤ 25 µm) and overall setting time (2.5-8 min) were investigated and the mechanophysical properties showed no significance ('NS') between Cu-ZPC and bare ZPC. However, cell viability and odontoblastic differentiation, alkaline phosphate (ALP) activity and alizarin red S (ARS) staining were highly stimulated in the extracts from the Cu-ZPC group compared to the ZPC group. Additionally, the antibacterial test showed that the Cu-ZPC extracts were more effective than the ZPC extracts (p < 0.05)., Significance: Cu-ZPC showed adequate mechanophysical properties (compressive strength, hardness, and surface roughness) and enhanced odontoblastic differentiation as well as antibacterial properties compared to the ZPC-only group. Based on the findings, the fabricated Cu-ZPC might have the potential for use in the field of dental medicine and clinical applications., (Copyright © 2021 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)

Brain diseases and damages come in many forms such as neurodegenerative diseases, tumors, and stroke. Millions of people currently suffer from neurological diseases worldwide. While Challenges of current diagnosis and treatment for neurological diseases are the drug delivery to the central nervous system. The Blood-Brain Barrier (BBB) limits the drug from reaching the targeted site thus showing poor effects. Nanoparticles that have advantage of the assembly at the nanoscale of available biomaterials can provide a delivery platform with potential to raising brain levels of either imaging therapeutic drugs or imaging. Therefore, successful modeling of the BBB is another crucial factor for the development of nanodrugs. In this review, we analyze the in vitro and in vivo findings achieved in various models, and outlook future development of nanodrugs for the successful treatment of brain diseases and damages., (© 2021. The Korean Tissue Engineering and Regenerative Medicine Society.)

The multifunctional biological properties of Ce ions including antioxidant, anti-inflammatory, antibacterial and anti-cancer effects are very encouraging for development of Ce-containing biomaterials with therapeutic properties. Herein, novel Ce 3+ /Ce 4+ ions containing mesoporous bioactive glass ultrasmall nanoparticles (Ce-BGn) were prepared by a facile one-pot ultrasound-assisted sol-gel method. Interestingly, Ce 2 O 3 incorporation exerted a significant influence on the particle size and textural properties of mesoporous BGn (SiO 2 - CaO binary glass system). Ce-BGn exhibited ultrasmall nanoparticle size (< 30 nm), mesoporous texture (pore size up to 2.82 nm and pore volume up to 0.191 cm 3 /g) and large specific surface area ca. 132.9 m 2 /g. Notably, in situ formation of CeO 2 nanospheres (3-6 nm) was detected at the surface and in the amorphous glass matrix of mesoporous Ce-BGn. Importantly, X-ray photoelectron spectroscopy (XPS) revealed the presence of 72.57 % Ce 3+ and 27.43 % Ce 4+ at the surface of mesoporous Ce-BGn with Ce 3+ /Ce 4+ ratio = 2.66. Furthermore, mesoporous Ce-BGn exhibited high catalase-mimic activity and showed sustained release of Ce (2.5-32 ppm), Ca (85-327 ppm) and Si (54-200 ppm) ions within 4 weeks along with excellent bone-like hydroxyapatite formation. Finally, the in vitro biological behavior of mesoporous Ce-BGn in cell cultures of human skin fibroblasts (HSF) revealed that mesoporous Ce-BGn (with concentrations up to 300 μg/mL) possess good cyto-biocompatibility. Taken together, novel ultrasmall mesoporous Ce-BGn showed remarkable catalase-mimic activity via surface containing Ce 3+ /Ce 4+ ions which can scavenge ROS (Ce 3+ ↔ Ce 4+ ) and decompose H 2 O 2 molecules into H 2 O and O 2 . In addition to that, Ce-BGn demonstrated sustained release of bioactive ions (Ce, Ca and Si), excellent bone-like hydroxyapatite formation and good cyto-biocompatibility., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Natural inorganic/organic nanohybrids are a fascinating model in biomaterials design due to their ultra-microstructure and extraordinary properties. Here, we report unique-structured nanohybrids through self-assembly of biomedical inorganic/organic nanounits, composed of bioactive inorganic nanoparticle core (hydroxyapatite, bioactive glass, or mesoporous silica) and chitosan shell - namely Chit@IOC. The inorganic core thin-shelled with chitosan could constitute as high as 90%, strikingly contrasted with the conventional composites. The Chit@IOC nanohybrids were highly resilient under cyclic load and resisted external stress almost an order of magnitude effectively than the conventional composites. The nanohybrids, with the nano-roughened surface topography, could accelerate the cellular responses through stimulated integrin-mediated focal adhesions. The nanohybrids were also able to load multiple therapeutic molecules in the core and shell compartment and then release sequentially, demonstrating controlled delivery systems. The nanohybrids compartmentally-loaded with therapeutic molecules (dexamethasone, fibroblast growth factor 2, and phenamil) were shown to stimulate the anti-inflammatory, pro-angiogenic and osteogenic events of relevant cells. When implanted in the in vivo calvarium defect model with 3D-printed scaffold forms, the therapeutic nanohybrids were proven to accelerate new bone formation. Overall, the nanohybrids self-assembled from Chit@IOC nanounits, with their unique properties (ultrahigh inorganic content, nano-topography, high resilience, multiple-therapeutics delivery, and cellular activation), can be considered as promising 3D tissue regenerative platforms., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Inflammation prevailing conditions delay healing processes of damaged tissues, leading to a functional impairment. Although anti-inflammatory drugs are clinically available, they often cause unwanted side effects thus being considered suboptimal. Here we report drug-free synthetic nanoparticles that target and internalize pro-inflammatory cells and release ions, ultimately demonstrating profound anti-inflammatory functions. We introduce folate-functionalized bioactive glass nanoparticle BGN(F) that can bind to pro-inflammatory cells to endocytose and release ions. The folate-conjugation significantly enhanced the nanoparticle internalization to LPS-induced pro-inflammatory cells. The direct treatment of BGN(F) at proper doses (80-160 μg/mL) substantially down-regulated pro-inflammatory molecules, including TNF-α, IL-6, iNOS and COX-2, at both gene and protein levels. The phosphorylation of intracellular signaling molecules involved in the inflammatory events, such as p38 MAPK, ERK (1/2), SAPK/JANK, IκBα, and NF-κB, were significantly suppressed by the BGN(F) treatment. Furthermore, BGN(F) was potential to switch the macrophage polarization from M1 to M2. The released ions, not the physical interactions, of nanoparticles were observed to contribute in major part to the anti-inflammatory actions of BGN(F). The BGN(F), when locally administered to a Notexin-induced myoinjury tissue in mice, significantly down-regulated IL-6 and TNF-α, switched the macrophage phenotype from M1 to M2, and accelerated tissue healing. The current findings that demonstrate profound anti-inflammatory actions of BGN(F) in vitro and in vivo support their uses as novel drug-free nanotherapeutic platform for the treatment of inflamed tissues., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

In the field of nanomedicine, drug-loaded nanocarriers that integrate nanotechnology and chemotherapeutics are widely used to achieve synergistic therapeutic effects. Here, we prepared mesoporous silica nanoparticles capped with cerium oxide nanoparticles (COP@MSN) wherein a pH trigger-responsive mechanism was used to control drug release and intracellular drug delivery. We blocked the mesopores of the carboxyl-functionalized MSN with aminated COP. These pores could be opened in acidic conditions to release the loaded drug, thus establishing a pH-responsive drug release system. We loaded doxorubicin (DOX) as anticancer biomolecule into the pores of MSN and capped with COP. The COP@DOX-MSN system showed a typical drug release profile in an acidic medium, which, however, was not observed in a neutral medium. In vitro studies using cancer cell line (HeLa) proved that the COP@DOX-MSN entered efficiently into HeLa cells and released DOX to the level sufficient for cytotoxicity. The cytotoxic effect of COP in cancer cells was facilitated by the pro-oxidant property of COPs, which considerably raised the reactive oxygen species (ROS) level, thereby leading to cellular apoptosis. The combination of DOX with COP (COP@DOX-MSN) showed even higher ROS level, demonstrating a cytotoxic synergism of drug and nanoparticle in terms of ROS generation. Collectively, the COP@DOX-MSN is considered useful for cancer treatment with the combined capacity of pH-controlled drug delivery, chemotherapeutics, and redox activity.

Restoration of hard tissue in conjunction with adhesive is a globally challenging issue in medicine and dentistry. Common clinical therapies involving application of adhesive and substitute material for functional or anatomical recovery are still suboptimal. Biomaterials with bioactivity and inhibitory effects of enzyme-mediated adhesive degradation can render a solution to this. Here, we designed a novel copper-doped bioactive glass nanoparticles (CuBGn) to offer multifunction: metalloproteinases (MMP) deactivation and remineralization and incorporated the CuBGn in resin-dentin adhesive systems, which showed most common failure of MMP mediated adhesive degradation among hard tissue adhesives, to evaluate proposed therapeutic effects. A sol-gel derived bioactive glass nanoparticles doping 10 wt% of Cu (Cu-BGn) for releasing Cu ions, which were well-known MMP deactivator, were successfully created and included in light-curing dental adhesive (DA), a filler-free co-monomer resin blend, at different concentrations (up to 2 wt%). These therapeutic adhesives (CuBGn-DA) showed enhanced (a)cellular bioactivity, cytocompatibility, microtensile bond strength and MMP deactivation-ability. In conclusion, the incorporation of Cu ions releasing nano-bioactive glass demonstrated multifunctional properties at the resin-dentin interface; MMP deactivation and remineralization, representing a suitable strategy to extend the longevity of adhesive-hard tissue (i.e. resin-dentin) interfaces.

Objective: Although polymethyl methacrylate (PMMA) is widely used as a dental material, a major challenge of using this substance is its poor antimicrobial (anti-adhesion) effects, which increase oral infections. Here, graphene-oxide nanosheets (nGO) were incorporated into PMMA to introduce sustained antimicrobial-adhesive effects by increasing the hydrophilicity of PMMA., Methods: After characterizing nGO and nGO-incorporated PMMA (up to 2wt%) in terms of morphology and surface characteristics, 3-point flexural strength and hardness were evaluated. The anti-adhesive effects were determined for 4 different microbial species with experimental specimens and the underlying anti-adhesive mechanism was investigated by a non-thermal oxygen plasma treatment. Sustained antimicrobial-adhesive effects were characterized with incubation in artificial saliva for up to 28 days., Results: The typical nanosheet morphology was observed for nGO. Incorporating nGO into PMMA roughened its surface and increased its hydrophilicity without compromising flexural strength or surface hardness. An anti-adhesive effect after 1h of exposure to microbial species in artificial saliva was observed in nGO-incorporated specimens, which accelerated with increasing levels of nGO without significant cytotoxicity to oral keratinocytes. Plasma treatment of native PMMA demonstrated that the antimicrobial-adhesive effects of nGO incorporation were at least partially due to increased hydrophilicity, not changes in the surface roughness. A sustained antimicrobial-adhesive property against Candida albicans was observed in 2% nGO for up to 28 days., Significance: The presence of sustained anti-adhesion properties in nGO-incorporated PMMA without loading any antimicrobial drugs suggests the potential usefulness of this compound as a promising antimicrobial dental material for dentures, orthodontic devices and provisional restorative materials., (Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Biomedical cements are considered promising injectable materials for bone repair and regeneration. Calcium phosphate composition sized with tens of micrometers is currently one of the major powder forms. Here we report a unique cement form made from mesoporous bioactive glass nanoparticles (BGn). The nanopowder could harden in reaction with aqueous solution at powder-to-liquid ratios as low as 0.4-0.5 (vs. 2.0-3.0 for conventional calcium phosphate cement CPC). The cementation mechanism investigated from TEM, XRD, FT-IR, XPS, and NMR analyses was demonstrated to be the ionic (Si and Ca) dissolution and then reprecipitation to form Si-Ca-(P) based amorphous nano-islands that could network the particles. The nanopowder-derived nanocement exhibited high surface area (78.7 m 2 /g); approximately 9 times higher than conventional CPC. The immersion of nanocement in simulated body fluid produced apatite nanocrystallites with ultrafine size of 10 nm (vs. 55 nm in CPC). The ultrafine nanocement adsorbed protein molecules (particularly positive charged proteins) at substantial levels; approximately 160 times higher than CPC. The nanocement released Si and Ca ions continuously over the test period of 2 weeks; the Si release was unique in nanocement whereas the Ca release was in a similar range to that observed in CPC. The release of ions significantly stimulated the responses of cells studied (rMSCs and HUVECs). The viability and osteogenesis of rMSCs were significantly enhanced by the nanocement ionic extracts. Furthermore, the in vitro tubular networking of HUVECs was improved by the nanocement ionic extracts. The in vivo neo-blood vessel formation in CAM model was significantly higher by the nanocement implant when compared with the CPC counterpart, implying the Si ion release might play a significant role in pro-angiogenesis. Furthermore, the early bone forming response of the nanocement, based on the implantation in a rat calvarial bone defect, demonstrated a sign of osteoinductivity along with excellent osteocondution and bone matrix formation. Although more studies remain to confirm the potential of nanocement, some of the intriguing physico-chemical properties and the biological responses reported herein support the promise of the new 'nanopowder-based nanocement' for hard tissue repair and regeneration., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Regeneration of infected tissues is a globally challenging issue in medicine and dentistry. Common clinical therapies involving a complete removal of infected areas together with a treatment of antimicrobial drugs are often suboptimal. Biomaterials with anti-bacterial and pro-regenerative potential can offer a solution to this. Here we design a novel nanocarrier based on a mesoporous silicate-calcium glass by doping with Ag ions and simultaneously loading antimicrobial drugs onto mesopores. The nanocarriers could controllably release multiple ions (silver, calcium, and silicate) and drugs (tetracycline or chlorohexidine) to levels therapeutically relevant, and effectively internalize to human dental stem cells (∼90%) with excellent viability, ultimately stimulating odontogenic differentiation. The release of Ag ions had profound effects on most oral bacteria species through a membrane rupture, and the antibiotic delivery complemented the antibacterial functions by inhibiting protein synthesis. Of note, the nanocarriers easily anchored to bacteria membrane helping the delivery of molecules to an intra-bacterial space. When administered to an infected dentin-pulp defect in rats, the therapeutic nanocarriers effectively regenerated tissues following a complete bacterial killing. This novel concept of multiple-delivering ions and drug can be extensively applied to other infectious tissues that require relayed biological functions (anti-bacterial then pro-regenerative) for successful healing., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Inducing differentiation and maturation of resident multipotent stem cells (MSCs) is an important strategy to regenerate hard tissues in mal-calcification conditions. Here we explore a co-delivery approach of therapeutic molecules comprised of ion and drug through a mesoporous bioglass nanoparticle (MBN) for this purpose. Recently, MBN has offered unique potential as a nanocarrier for hard tissues, in terms of high mesoporosity, bone bioactivity (and possibly degradability), tunable delivery of biomolecules, and ionic modification. Herein Sr ion is structurally doped to MBN while drug Phenamil is externally loaded as a small molecule activator of BMP signaling, for the stimulation of osteo/odontogenesis and mineralization of human MSCs derived from dental pulp. The Sr-doped MBN (85Si:10Ca:5Sr) sol-gel processed presents a high mesoporosity with a pore size of ∼6nm. In particular, Sr ion is released slowly at a daily rate of ∼3ppm per mg nanoparticles for up to 7days, a level therapeutically effective for cellular stimulation. The Sr-MBN is internalized to most MSCs via an ATP dependent macropinocytosis within hours, increasing the intracellular levels of Sr, Ca and Si ions. Phenamil is loaded maximally ∼30% into Sr-MBN and then released slowly for up to 7days. The co-delivered molecules (Sr ion and Phenamil drug) have profound effects on the differentiation and maturation of cells, i.e., significantly enhancing expression of osteo/odontogenic genes, alkaline phosphatase activity, and mineralization of cells. Of note, the stimulation is a result of a synergism of Sr and Phenamil, through a Trb3-dependent BMP signaling pathway. This biological synergism is further evidenced in vivo in a mal-calcification condition involving an extracted tooth implantation in dorsal subcutaneous tissues of rats. Six weeks post operation evidences the osseous-dentinal hard tissue formation, which is significantly stimulated by the Sr/Phenamil delivery, based on histomorphometric and micro-computed tomographic analyses. The bioactive nanoparticles releasing both Sr ion and Phenamil drug are considered to be a promising therapeutic nanocarrier platform for hard tissue regeneration. Furthermore, this novel ion/drug co-delivery concept through nanoparticles can be extensively used for other tissues that require different therapeutic treatment., Statement of Significance: This study reports a novel design concept in inorganic nanoparticle delivery system for hard tissues - the co-delivery of therapeutic molecules comprised of ion (Sr) and drug (Phenamil) through a unique nanoparticle of mesoporous bioactive glass (MBN). The physico-chemical and biological properties of MBN enabled an effective loading of both therapeutic molecules and a subsequently sustained/controlled release. The co-delivered Sr and Phenamil demonstrated significant stimulation of adult stem cell differentiation in vitro and osseous/dentinal regeneration in vivo, through BMP signaling pathways. We consider the current combination of Sr ion with Phenamil is suited for the osteo/odontogenesis of stem cells for hard tissue regeneration, and further, this ion/drug co-delivery concept can extend the applications to other areas that require specific cellular and tissue functions., (Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Here we communicate the generation of biomimetically grown apatite spheres from aggregated bioglass nanoparticles and the potential properties applicable for drug delivery and cell/tissue engineering. Ion releasing nanoparticulates of bioglass (85%SiO 2 -15%CaO) in a mineralizing medium show an intriguing dynamic phenomenon - aggregation, mineralization to apatite, integration and growth into micron-sized (1.5-3μm) spheres. During the progressive ionic dissolution/precipitation reactions, nano-to-micro-morphology, glass-to-crystal composition, and the physico-chemical properties (porosity, surface area, and charge) change dynamically. With increasing reaction period, the apatite becomes more crystallized with increased crystallinity and crystal size, and gets a composition closer to the stoichiometry. The developed microspheres exhibit hierarchical surface nanostructure, negative charge (ς-potential of -20mV), and ultrahigh mesoporosity (mesopore size of 6.1nm, and the resultant surface area of 63.7m 2 /g and pore volume of 0.153cm 3 /g) at 14days of mineralization, which are even higher than those of its precursor bioglass nanoparticles. Thanks to these properties, the biomimetic mineral microspheres take up biological molecules effectively, i.e., loading capacity of positive-charged protein is over 10%. Of note, the release is highly sustainable at a constant rate, i.e., profiling almost 'zero-order' kinetics for 4weeks, suggesting the potential usefulness as protein delivery systems. The biomimetic mineral microspheres hold some remnant Si in the core region, and release calcium, phosphate, and silicate ions over the test period, implying the long-term ionic-related therapeutic functions. The mesenchymal stem cells favour the biomimetic spheres with an excellent viability. Due to the merit of sizes (a few micrometers), the spheres can be intercalated into cells, mediating cellular interactions in 3D cell-spheroid engineering, and also can stimulate osteogenic differentiation of cells when incorporated into cell-laden gels. The intriguing properties observed in this study, including biomimetic composition, high mesoporosity, release of therapeutic ions, effective loading and long-term release of proteins, and diverse yet favorable 3D cellular interactions, suggest great potential of the newly developed biomimetic microspheres in biomedical applications, such as drug delivery and cell/tissue engineering., Statement of Significance: This work reports the generation of apatite spheres with a few micrometers in size biomimetically grown from bioactive glass nanoparticles, through a series of intriguing yet unprecedented phenomenon involving aggregation of nanoparticles, mineralization and sphere growth. The mineral microspheres possess some unique physico-chemical properties including mesoporosity, ultrahigh surface area, and therapeutic ionic release. Furthermore, the spheres show excellent loading and delivery capacity of protein molecules, and mediate favorable cellular interactions in 2D and 3D culture conditions, demonstrating a future multifunctional microcarrier platform for the therapeutics delivery and cell/tissue engineering., (Copyright © 2017. Published by Elsevier Ltd.)

Objective: This study investigated the mechanical and in vitro biological properties (in immortalized human dental pulp stem cells (ihDPSCs)) of bioactive glass nanoparticle (BGN)-incorporated glass ionomer cement (GIC) with or without chitosan as a binder., Methods: After the BGNs were synthesized and characterized, three experimental GICs and a control (conventional GIC) that differed in the additive incorporated into a commercial GIC liquid (Hy-bond, Shofu, Japan) were produced: BG5 (5wt% of BGNs), CL0.5 (0.5wt% of chitosan), and BG5+CL0.5 (5wt% of BGNs and 0.5wt% of chitosan). After the net setting time was determined, weight change and bioactivity were analyzed in simulated body fluid (SBF) at 37°C. Mechanical properties (compressive strength, diametral tensile strength, flexural strength and modulus) were measured according to the incubation time (up to 28 days) in SBF. Cytotoxicity (1day) and biomineralization (14 days), assessed by alizarin red staining, were investigated using an extract from GIC and ihDPSCs. Data were analyzed using one-way analysis of variance (ANOVA) followed by Tukey's post hoc test; p<0.05., Results: BGNs were sol-gel synthesized to be approximately 42nm in diameter with a spherical morphology and amorphous structure. After the bioactivity and suspension ability of the BGNs were confirmed, all the experimental GIC groups had setting times of less than 6min and approximately 1% weight loss after 28days of incubation. In addition, BGNs incorporated into GIC (BG5 and BG5+CL0.5) exhibited surface bioactivity. The mechanical properties were increased in the BGN-incorporated GICs compared to those in the control (p<0.05). Without cytotoxicity, the biomineralization capacity was ranked in the order BG5, BG5+CL0.5, control, and CL0.5 (p<0.05)., Significance: BGN-incorporated GIC showed enhanced mechanical properties such as compressive, diametral tensile and flexural strength as well as in vitro biomineralization properties in ihDPSCs without cytotoxicity. Therefore, the developed BGN-incorporated GIC is a promising restorative dental material, although further in vivo investigation is needed before clinical application., (Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Multifunctional nanocarrier-based theranostics is currently considered to solve some key unmet challenges in cancer treatment. Here we report a nanocarrier platform, named carbon dot (CD) created mesoporous hollow organosilica (C-hMOS) nanoparticles, to deliver anticancer drug and to enable optical imaging. The hollow structure was formed by the removal of a nanorod core template, and at the same time, the fluorescent signal was endowed from the heat-treated organosilica network. Thanks to the hollow and mesoporous structure, the C-hMOS effectively loaded doxorubicin (DOX) for cancer chemotherapy. The DOX was released from C-hMOS highly sustainably (over 12days) and pH-dependently (pH 5.0 >pH 7.4). The DOX-loading C-hMOS internalized cancer cells efficiently (>90%), and induced cellular apoptosis including the expression of caspase-3. The treatment of C-hMOS to cancer cells enabled multi-color visualization in vitro, suggesting the possibility of cell tracing. Moreover, when injected intratumorally in mice, the C-hMOS exhibited strong optical signals in vivo along with a high optical stability (over a week). The injected C-hMOS were distributed only a fraction in liver but not in heart, lung, spleen or kidney and displayed good biocompatibility. The DOX-delivering C-hMOS significantly suppressed the in vivo tumor growth associated with apoptotic functions. Taken together, the developed C-hMOS nanoparticles can be a promising nanoplatform for drug delivery and in vivo imaging in cancer treatment., Statement of Significance: Multifunctional nanoparticles that combine chemotherapeutic ability with imaging modality comprise promising platform for cancer theranostics. Here we developed a novel theranostic nanoparticle, i.e., carbon-dot created mesoporous hollow silica nanoparticle, to offer unique merit for this purpose. The in vitro and in vivo findings to support this include: i) carbon dots with 1-2nm size in situ generated discretely and uniformly within silica network, ii) hollow and mesoporous structure effective for loading of DOX at high content, iii) release behavior of DOX in a sustainable and pH-dependent manner, iv) chemotherapeutic efficacy in killing cancer cells and suppressing tumor growth through DOX delivery, and v) carbon dot induced multi-color fluorescence imaging within cells and tumor tissues. These collective multifaceted properties may facilitate the novel carbon dot nanocarriers to be a potential candidate for delivering anticancer drug and non-invasive imaging in cancer treatment., (Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Providing a nanotopological physical cue in concert with a bioactive chemical signal within 3D scaffolds, while it being considered a promising approach for bone regeneration, has yet to be explored. Here, we develop 3D porous scaffolds that are networked to be a nanofibrous structure and incorporated with bioactive glass nanoparticles (BGn) to tackle this issue. The presence of BGn and nanofibrous structure (BGn + nanofibrous) substantially increased the surface area, hydro-affinity and protein loading capacity of scaffolds. In particular, the BGn released Si and Ca ions to the levels known to be biologically effective, offering the bone scaffold an ability to deliver therapeutic ions. The mesenchymal stem cells (MSCs) from rats exhibited significantly accelerated adhesion events including cell anchorage, cytoskeletal extensions, and the expression of adhesion signaling molecules on the BGn/nanofibrous scaffolds. The cells gained a more rapid proliferation and migration (penetration) ability over 2 weeks within the BGn + nanofibrous scaffolds than within either nanofibrous or BGn scaffolds. The osteogenesis of MSCs, as confirmed by the expressions of bone-associated genes and proteins, as well as the cellular mineralization was significantly stimulated by the BGn and nanofibrous topology in a synergistic manner. The behaviors of endothelial cells (HUVECs) including cell migration and tubule networking were also enhanced when influenced by the BGn and nanofibrous scaffolds (but more by BGn than by nanofiber). A subcutaneous tissue implantation of the scaffolds further evidenced the in vivo stimulation of neo-blood vessel formation by the BGn + nanofibrous cues, suggesting the possible promising role in bone regeneration. Taken together, the therapeutic ions and nanofibrous topology implemented within 3D scaffolds are considered to play synergistic actions in osteogenesis and angiogenesis, implying the potential usefulness of the BGn + nanofibrous scaffolds for bone tissue engineering.

The acquired resistance of human cancer cells to apoptosis is one of the defining hallmarks of cancer. Upregulated expression of inhibitors of apoptosis proteins (IAP) has been implicated in drug resistance in several cancers. Survivin (encoded by BIRC5), the smallest member of the IAP family, has been correlated with both the control of cell apoptosis and regulation of cell mitosis in cancer. Owing to its critical role in regulation of cell survival and development of cancer resistance, as well as its distinguishingly high level of expression in many types of cancer, survivin has long been regarded as a promising therapeutic target for cancer therapy. This review first presents an overview of the mechanism by which survivin regulates cell function, followed by a discussion of the current state of survivin-targeted therapies. We focus on the application of nanoparticulate systems to deliver survivin inhibitors, co-delivery of survivin inhibitors with chemotherapeutic agents, synchronous targeting of survivin, other drug resistant molecules, and survivin regulators. We conclude by highlighting the current limitations associated with survivin-targeted therapies and speculating on the future strategies to surmount these impediments., (Copyright © 2016 Elsevier B.V. All rights reserved.)

The preparation of the ideal smart drug-delivery systems were successfully achieved by the in situ co-polymerization of a vinyl group-functionalized mesoporous silica nanoparticle (f-MSN) with 1-butyl-3-vinyl imidazolium bromide (BVIm) and N-isopropylacrylamide (NIPAAm) monomers. The thickness of the capping copolymer layer, poly(NIPAAm-co-BVIm) (p-NIBIm), was controlled at between 2.5nm and 5nm, depending on the monomers/f-MSN ratio in the reaction solution. The finally obtained smart drug-delivery systems are named as p-MSN2.5 and p-MSN5.0 (MSNs integrated by 2.5nm and 5nm p-NIBIm layer in thickness). The key roles of the mesoporous-silica-nanoparticle (MSN) core and the p-NIBIm shell are drug-carrying (or containing) and pore-capping, respectively, and the latter has an on/off function that operates in accordance with temperature changes. According to the swelling- or shrinking-responses of the smart capping copolymer to temperature changes between 10°C and 40°C, the loading and releasing patterns of the model drug cytochrome c were studied in vitro. The developed system showed interesting performances such as a cytochrome-c-loading profile (loading capacity for 3h=26.3% and 19.8% for p-MSN2.5 and p-MSN5.0, respectively) at 10°C and a cytochrome-c-releasing profile (releasing efficiency=>95% within 3 days and 4 days for p-MSN2.5 and p-MSN5.0, respectively) at 40°C. The cytotoxicity of the drug delivery systems, p-MSN2.5 and p-MSN5.0 (in the concentration range of <0.125mg/mL without drug), for human embryonic kidney (HEK 293) cells were minimal in vitro compared with that of a blank MSN. These results may be reasonably applied in the field of specified drug delivery., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Unlabelled: Increasing amounts of metal-based implants are used for orthopedic or dental surgeries throughout the world. Still several implant-related problems such as inflammation, loosening and bacterial infection are prevalent. These problems stem from the immediate microbial contamination and failure of initial osteoblast adhesion. Additionally, bacterial infections can cause serious and life-threatening conditions such as osteomyelitis. Here, antibiotic (gentamicin)-loaded silk protein fibroin (non-mulberry silkworm, Antheraea mylitta) nanoparticles are fabricated and deposited over the titanium surface to achieve sustained drug release in vitro and to alter the surface nano-roughness. Based on the altered surface topography, chemistry and antibacterial activity, we conclude that the nanoparticle-deposited surfaces are superior for osteoblast adhesion, proliferation and differentiation in comparison to bare Ti. This method can be utilized as a cost-effective approach in implant modification., From the Clinical Editor: Titanium-based implants are commonly used in the field of orthopedics or dentistry. Surface modification of an implant is vital to ensure osseointegration. In this article, the author investigated the use of silk protein fibroins for metal surface modification and also for drug delivery against bacteria. The encouraging data should provide a new method in terms of nanotechnology in the respective clinical fields., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Currently there is a strong need for new drug delivery systems, which enable targeted and controlled function in delivering drugs while satisfying highly sensitive imaging modality for early detection of the disease symptoms and damaged sites. To meet these criteria we develop a system that integrates therapeutic and diagnostic capabilities (theranostics). Importantly, therapeutic efficacy of the system is enhanced by exploiting synergies between nanoparticles, drug, and hyperthermia. At the core of our innovation is near-infrared (NIR) responsive gold nanorods (Au) coated with drug reservoirs--mesoporous silica shell (mSi)--that is capped with thermoresponsive polymer. Such design of theranostics allows the detection of the system using computed tomography (CT), while finely controlled release of the drug is achieved by external trigger, NIR light irradiation--ON/OFF switch. Doxorubicin (DOX) was loaded into mSi formed on the gold core (Au@mSi-DOX). Pores were then capped with the temperature-sensitive poly(N-isopropylacrylamide)-based N-butyl imidazolium copolymer (poly(NIPAAm-co-BVIm)) resulting in a hybrid system-Au@mSi-DOX@P. A 5 min exposure to NIR induces polymer transition, which triggers the drug release (pores opening), increases local temperature above 43 °C (hyperthermia), and upregulates particle uptake (polymer becomes hydrophilic). The DOX release is also triggered by drop in pH enabling localized drug release when particles are taken up by cancer cells. Importantly, the synergies between chemo- and photothermal therapy for DOX-loaded theranostics were confirmed. Furthermore, higher X-ray attenuation value of the theranostics was confirmed via X-ray CT test indicating that the nanoparticles act as contrast agent and can be detected by CT.

Mesoporous bioactive nanoparticles (MBNs) have been developed as promising additives to various types of bone or dentin regenerative material. However, biofunctionality of MBNs as dentin regenerative additive to dental materials have rarely been studied. We investigated the uptake efficiency of MBNs-NH2 with their endocytosis pathway and the role of MBNs-NH2 in odontogenic differentiation to clarify inherent biofunctionality. MBNs were fabricated by sol-gel synthesis, and 3% APTES was used to aminate these nanoparticles (MBNs-NH2) to reverse their charge from negative to positive. To characterize the MBNs-NH2, TEM, XRD, FTIR, zeta(ξ)-potential measurements, and Brunauer-Emmett-Teller analysis were performed. After primary cultured rat dental pulp stem cells (rDPSCs) were incubated with various concentrations of MBNs-NH2, stem cell viability (24 hours) with or without differentiated media, internalization of MBNs-NH2 in rDPSCs (~4 hours) via specific endocytosis pathway, intra or extracellular ion concentration and odontoblastic differentiation (~28 days) were investigated. Incubation with up to 50 μg/mL of MBNs-NH2 had no effect on rDPSCs viability with differentiated media (p>0.05). The internalization of MBNs-NH2 in rDPSCs was determined about 92% after 4 hours of incubation. Uptake was significantly decreased with ATP depletion and after 1 hour of pre-treatment with the inhibitor of macropinocytosis (p<0.05). There was significant increase of intracellular Ca and Si ion concentration in MBNs-NH2 treated cells compared to no-treated counterpart (p<0.05). The expression of odontogenic-related genes (BSP, COL1A, DMP-1, DSPP, and OCN) and the capacity for biomineralization (based on alkaline phosphatase activity and alizarin red staining) were significantly upregulated with MBNs-NH2. These results indicate that MBNs-NH2 induce odontogenic differentiation of rDPSCs and may serve as a potential dentin regenerative additive to dental material for promoting odontoblast differentiation.

Gene silencing through siRNA delivery has shown great promise for treating diseases and repairing damaged tissues, including bone. This report is the first to develop siRNA delivery system in the inhibition of osteoclastic functions which in turn can help turn-over bone mass increase in the diseases like osteoporosis. For this reason, biocompatible and degradable nanocarriers that can effectively load and deliver genetic molecules to target cells and tissues are being actively sought by researchers. In this study, mesoporous bioactive glass nanospheres (MBG), a novel unique biocompatible degradable inorganic nanocarrier, is introduced. Furthermore, siRNA was designed to function by inhibiting the expression of the receptor activator of nuclear factor kappa B (RANK) in order to suppress osteoclastogenesis. Amine-functionalized MBG were synthesized with tunable mesoporosities, showing a strong complexation with siRNA. An in vitro release profile indicated that the siRNA from the MBG was able to achieve a highly sustainable liberation for up to 4 days, confirming a temporary delivery system can be designed to function for that period of time. The intracellular uptake capacity of the complex siRNA(RANK)-MBG was recorded to be around 70%. Furthermore, the RANK-expressing cell population declined down to 29% due to the delivery of siRNA(RANK)-MBG (vs. 86% in control). The expression of osteoclastogenesis-related genes, including c-fos, cathepsin-K, tartrate-resistant acid phosphatase (TRAP), and nuclear factor of activated T-cells cytoplasmic 1 (NFATc1), was substantially down-regulated by the siRNA delivery system. This study reports for the first time on the use of a novel MBG delivery system for siRNA that aims to suppress osteoclastic actions. MBGs may be a potential gene delivery platform for hard tissue repair and disease treatment due to the collective results which indicate a high loading capacity, temporary release kinetics, high intracellular uptake rate, and sufficient gene silencing effects, together with the intrinsic beneficial properties like bone-bioactivity and degradability., Statement of Significance: This report is the first to develop siRNA delivery system of biocompatible and degradable nanocarriers made from a unique composition, i.e., mesoporous bioactive glass that can effectively load and deliver genetic molecules to osteoclastic cells. We proved through a series of studies that the biocompatible nanocarriers are effective for the delivery of siRNA in the inhibition of osteoclastic functions which thus might be considered as a nanocarrier platform to help turn-over bone mass increase in the diseases like osteoporosis., (Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

The newly developed multifunctional (self-activated fluorescent, mesoporous, and biocompatible) hollow mesoporous silica nanoellipsoids (f-hMS) are potentially useful as a delivery system of drugs for therapeutics and imaging purposes. For the synthesis of f-hMS, self-activated fluorescence hydroxyapatite (fHA) was used as a core template. A mesoporous silica shell was obtained by silica formation and subsequent removal of the fHA core, which resulted in a hollow-cored f-hMS. Although the silica shell provided a highly mesoporous structure, enabling an effective loading of drug molecules, the fluorescent property of fHA was also well-preserved in the f-hMS. Cytochrome c and doxorubicin, used as a model protein and anticancer drug, respectively, were shown to be effectively loaded onto f-hMS and were then released in a sustainable and controllable manner. The f-hMS was effectively taken up by the cells and exhibited fluorescent labeling while preserving excellent cell viability. Overall, the f-hMS nanoreservoir may be useful as a multifunctional carrier system for drug delivery and cell imaging.

Nanomedicine seeks to apply nanoscale materials for the therapy and diagnosis of diseased and damaged tissues. Recent advances in nanotechnology have made a major contribution to the development of multifunctional nanomaterials, which represents a paradigm shift from single purpose to multipurpose materials. Multifunctional nanomaterials have been proposed to enable simultaneous target imaging and on-demand delivery of therapeutic agents only to the specific site. Most advanced systems are also responsive to internal or external stimuli. This approach is particularly important for highly potent drugs (e.g. chemotherapeutics), which should be delivered in a discreet manner and interact with cells/tissues only locally. Both advances in imaging and precisely controlled and localized delivery are critically important in cancer treatment, and the use of such systems - theranostics - holds great promise to minimise side effects and boost therapeutic effectiveness of the treatment. Among others, mesoporous silica nanoparticles (MSNPs) are considered one of the most promising nanomaterials for drug delivery. Due to their unique intrinsic features, including tunable porosity and size, large surface area, structural diversity, easily modifiable chemistry and suitability for functionalization, and biocompatibility, MSNPs have been extensively utilized as multifunctional nanocarrier systems. The combination or hybridization with biomolecules, drugs, and other nanoparticles potentiated the ability of MSNPs towards multifunctionality, and even smart actions stimulated by specified signals, including pH, optical signal, redox reaction, electricity and magnetism. This paper provides a comprehensive review of the state-of-the-art of multifunctional, smart drug delivery systems centered on advanced MSNPs, with special emphasis on cancer related applications.

A novel therapeutic scaffolding system of engineered nanocarriers within a foam matrix for the long-term and sequential delivery of growth factors is reported. Mesoporous silica nanospheres were first functionalized to have an enlarged mesopore size (12.2nm) and aminated surface, which was then shelled by a biopolymer, poly(lactic acid) (PLA) or poly(ethylene glycol) (PEG), via electrospraying. The hybrid nanocarrier was subsequently combined with collagen to produce foam scaffolds. Bovine serum albumin (BSA), used as a model protein, was effectively loaded within the enlarged nanospheres. The biopolymer shell substantially prolonged the release period of BSA (2-3weeks from shelled nanospheres vs. within 1week from bare nanospheres), and the release rate was highly dependent on the shell composition (PEG>PLA). Collagen foam scaffolding of the shelled nanocarrier further slowed down the protein release, while enabling the incorporation of a rapidly releasing protein, which is effective for sequential protein delivery. Acidic fibroblast growth factor (aFGF), loaded onto the shelled-nanocarrier scaffolds, was released over a month at a highly sustainable rate, profiling a release pattern similar to that of BSA. The biological activity of the aFGF was evidenced by the significant proliferation of osteoblastic precursor cells in the aFGF-releasing scaffolds. Furthermore, the aFGF-delivering scaffolds implanted in rat subcutaneous tissue for 2weeks showed a substantially enhanced invasion of fibroblasts with a homogeneous population. Taken together, it is concluded that the biopolymer encapsulation of mesoporous nanospheres effectively prolongs the release of growth factors over weeks to a month, providing a nanocarrier platform for a long-term growth factor delivery. Moreover, the foam scaffolding of the nanocarrier system is a potential therapeutic three-dimensional matrix for cell culture and tissue engineering., (Copyright © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Development of biocompatible and multifunctional nanocarriers is important for the therapeutic efficacy of drug molecules in the treatment of disease and tissue repair. A novel nanocarrier of luminescent hollowed mesoporous silica (L-hMS) was explored for the loading and controlled delivery of drugs. For the synthesis of L-hMS, self-activated luminescence hydroxyapatite (LHA) was used as a template. Different thicknesses (∼ 7-62 nm) of mesoporous silica shell were obtained by varying the volume of silica precursor and the subsequent removal of the LHA core, which resulted in hollow-cored (size of ∼ 40 nm × 10 nm) mesoporous silica nanoreservoirs, L-hMS. While the silica shell provided a highly mesoporous structure, enabling an effective loading of drug molecules, the luminescent property of LHA was also well preserved in both the silica-shelled and the hollow-cored nanocarriers. Doxorubicin (DOX), used as a model drug, was shown to be effectively loaded onto the mesopore structure and within the hollow space of the nanoreservoir. The DOX release was fairly pH-dependent, occurring more rapidly at pH 5.3 than at pH 7.4, and a long-term sustainable delivery over the test period of 2weeks was observed. The nanoreservoir exhibited favorable cell compatibility with low cytotoxicity and excellent cell uptake efficiency (over 90%). Treatment of HeLa cells with DOX-loaded L-hMS elicited a sufficient degree of biological efficacy of DOX, as confirmed in the DOX-induced apoptotic behaviors, including stimulation in caspase-3 expression, and was even more effective than the direct DOX treatment. Overall, the newly developed L-hMS nanoreservoirs may be potentially useful as a multifunctional (luminescent, mesoporous and biocompatible) carrier system to effectively load and sustainably deliver small molecules, including anticancer drugs., (Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Collagen (Col) hydrogels have poor physicochemical and mechanical properties and are susceptible to substantial shrinkage during cell culture, which limits their potential applications in hard tissue engineering. Here, we developed novel nanocomposite hydrogels made of collagen and mesoporous bioactive glass nanoparticles (mBGns) with surface amination, and addressed the effects of mBGn addition (Col:mBG = 2:1, 1:1 and 1:2) and its surface amination on the physicochemical and mechanical properties of the hydrogels. The amination of mBGn was shown to enable chemical bonding with collagen molecules. As a result, the nanocomposite hydrogels exhibited a significantly improved physicochemical and mechanical stability. The hydrolytic and enzymatic degradation of the Col-mBGn hydrogels were slowed down due to the incorporation of mBGn and its surface amination. The mechanical properties of the hydrogels, specifically the resistance to loading as well as the stiffness, significantly increased with the addition of mBGn and its aminated form, as assessed by a dynamic mechanical analysis. Mesenchymal stem cells cultivated within the Col-mBGn hydrogels were highly viable, with enhanced cytoskeletal extensions, due to the addition of surface aminated mBGn. While the Col hydrogel showed extensive shrinkage (down to ∼20% of initial size) during a few days of culture, the shrinkage of the mBGn-added hydrogel was substantially reduced, and the aminated mBGn-added hydrogel had no observable shrinkage over 21 days. Results demonstrated the effective roles of aminated mBGn in significantly improving the physicochemical and mechanical properties of Col hydrogel, which are ultimately favorable for applications in stem cell culture for bone tissue engineering., (Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

An effective tumor-targeted drug delivery system for photodynamic therapy was developed by designing ligand-mediated nanoparticles with stable formulations of a hydrophobic photosensitizer. Novel folic acid (FA)-conjugated amphiphilic block copolymers of polyethylene glycol (PEG) and poly-β-benzyl-L-aspartate (PBLA) with the potential to act as pH-responsive drug release reservoirs were synthesized. The photosensitizer, 2,4-diacetyl deuteroporphyrin IX dimethyl ether (DD-PpIX), was conjugated to the copolymers through pH-sensitive hydrazone linkage. The syntheses and compositions of all copolymers were confirmed by ¹H NMR measurement. Photosensitizer-conjugated amphiphilic copolymeric nanoparticles (FA-PEG-P(Asp-Hyd)-DD-PpIX) were prepared by micelle formation in aqueous solution. The particle sizes of the FA-PEG-PBLA and FA-PEG-P(Asp-Hyd)-DD-PpIX nanoparticles were determined by light-scattering measurements. The range was 105-298 nm, depending on copolymer molecular weight and composition. Field emission scanning electron microscopy showed that the FA-PEG-P(Asp-Hyd)-DD-PpIX copolymeric nanoparticles were submicron in size and spherical in shape. The results of in vitro release tests showed that the release profiles of DD-PpIX from the nanoparticles were strongly pH-dependent and influenced by the amount of photosensitizer that was conjugated. In vitro tests using HeLa cells indicated that the FA-PEG-P(Asp-Hyd)-DD-PpIX nanoparticles had low dark-toxicity and showed more than 97% of cellular uptake. Based on our results, the FA-PEG-P(Asp-Hyd)-DD-PpIX nanoparticle system could be a promising approach for developing novel photosensitizer delivery carriers for photodynamic therapy.

We report the ability of aminated mesoporous silica nanoparticles (MSN-NH2) with large mesopore space and positive-charged surface to deliver genes within rat mesenchymal stem cells (MSCs). The amine functionalized inorganic nanoparticles were complexed with bone morphogenetic protein-2 (BMP2) plasmid DNA (pDNA) to study their transfection efficiency in MSCs. Intracellular uptake of the complex BMP2 pDNA/MSN-NH2 occurred significantly, with a transfection efficiency of approximately 68%. Furthermore, over 66% of the transfected cells produced BMP2 protein. The osteogenic differentiation of the transfected MSCs was demonstrated by the expression of bone-related genes and proteins including bone sialoprotein, osteopontin, and osteocalcin. The MSN-NH2 delivery vehicle for BMP2 pDNA developed in this study may be a potential gene delivery system for bone tissue regeneration., (Copyright © 2012 Wiley Periodicals, Inc.)

Inorganic bioactive nanomaterials are attractive for hard tissue regeneration, including nanocomponents for bone replacement composites and nanovehicles for delivering therapeutics. Bioactive glass nanoparticles (BGn) have recently gained potential usefulness as bone and tooth regeneratives. Here we demonstrate the capacity of the BGn with mesopores to load and deliver therapeutic molecules (drugs and particularly genes). Spherical BGn with sizes of 80-90 nm were produced to obtain 3-5 nm sized mesopores through a sono-reacted sol-gel process. A simulated body fluid test of the mesoporous BGn confirmed their excellent apatite forming ability and the cellular toxicity study demonstrated their good cell viability up to 100 μg ml(-1). Small molecules like chemical drug (Na-ampicillin) and gene (small interfering RNA; siRNA) were introduced as model drugs considering the mesopore size of the nanoparticles. Moreover, amine-functionalization allowed switchable surface charge property of the BGn (from -20-30 mV to +20-30 mV). Loading of ampicillin or siRNA saturated within a few hours (~2 h) and reflected the mesopore structure. While the ampicillin released relatively rapidly (~12 h), the siRNA continued to release up to 3 days with almost zero-order kinetics. The siRNA-nanoparticles were easily taken up by the cells, with a transfection efficiency as high as ~80%. The silencing effect of siRNA delivered from the BGn, as examined by using bcl-2 model gene, showed dramatic down-regulation (~15% of control), suggesting the potential use of BGn as a new class of nanovehicles for genes. This, in conjunction with other attractive properties, including size- and mesopore-related high surface area and pore volume, tunable surface chemistry, apatite-forming ability, good cell viability and the possible ion-related stimulatory effects, will potentiate the usefulness of the BGn in hard tissue regeneration.

Magnetic nanoparticles (MNPs) are considered highly useful in therapeutic and diagnostic applications. However, MNPs require surface modification to promote dispersibility in aqueous solutions and thus biocompatibility. In this article, the authors modified MNPs with inorganic silica layer to create silica-coated magnetite nanoparticles (MNP@Si) via sol-gel process. Synthesis involves hydrolysis and condensation steps using tetraethylorthosilicate (TEOS) in methanol/ polyethylene glycol (PEG) solution and ammonia catalyst. Nanoparticles were characterized in terms of morphology, particle size, crystalline phase, chemical-bond structure, surface charge and magnetic properties: in particular, the MNP@Si size was easily tunable through alteration of the Fe(3) O(4) -to-TEOS ratio. As this ratio increased, the MNP@Si size decreased from 270 to 15 nm whilst maintaining core 12-nm MNP particle size, indicating decrease in thickness of the silica coating. All MNP@Si, in direct contrast to uncoated MNPs, showed excellent stability in aqueous solution. The particles' physicochemical and magnetic properties systematically varied with size (coating thickness), and the zeta potential diminished toward negative values, while magnetization increased as the coating thickness decreased. 15-nm MNP@Si showed excellent magnetization (about 64.1 emu/g), almost comparable to that of uncoated MNPs (70.8 emu/g). Preliminary in vitro assays confirmed that the silica layer significantly reduced cellular toxicity as assessed by increase in cell viability and reduction in reactive oxygen species production during 48 h of culture. Newly-developed MNP@Si, with a high capacity for magnetization, water-dispersibility, and diminished cell toxicity, may be potentially useful in diverse biomedical applications, including delivery of therapeutic and diagnostic biomolecules., (Copyright © 2012 Wiley Periodicals, Inc.)

Organic-inorganic hybridized nanofibers constituted of gelatin and siloxane were generated by the electrospinning technique for use as bone regeneration matrices. The composition of the nanofibers selected was to be both degradable and bioactive. Precursors of gelatin and siloxane were dissolved in a modified acidic solvent composed of acetic acid, ethyl acetate, and distilled water. The hybridized nanofibers with various compositions (gelatin/siloxane = 1/2, 1, and 2 by weight fraction) were successfully electrospun under the adjusted processing conditions. Compared to the pure gelatin nanofiber, the hybridized nanofibers showed improved chemical stability in a saline solution. This was attributed to the cross-linking effect of the siloxane with the gelatin chains. Osteoblastic cells were observed to attach, spread, and populate actively on the hybridized nanofiber matrices. In particular, the cells on the hybridized nanofibers were recruited to elicit better osteoblastic activity (alkaline phosphatase) with respect to those on the pure gelatin. The newly-developed hybridized nanofiber is considered to be useful as a bone regeneration matrix, due to its nanofibrous structural trait as well as its degradability and bone cell activity., ((c) 2007 Wiley Periodicals, Inc.)

In this study, gelatin, was successfully electrospun from a newly developed water-based co-solvent composed of ethyl acetate and acetic acid in water. Since natural polymers including gelatin exhibit limited solubility in water, toxic or highly acidic solvents are normally used to dissolve them for electrospinning. Instead of using those solvents, we used ethyl acetate in concert with acetic acid in water, and investigated the beneficial effect of its use in terms of the spinnability of the nanofiber and the acidity of the solvent. The replacement of acetic acid with ethyl acetate was observed to improve the spinnability of the nanofiber by reducing the surface tension of the solution as well as to increase the pH of the solvent significantly. The optimal composition of the co-solvent was found to correspond to a ratio of ethyl acetate to acetic acid of 2:3. Under this solvent condition, the gelatin could be dissolved at concentrations of up to approximately 11 wt% and electrospun successfully to produce nanofibers with various diameters (47-145 nm on average) depending on the gelatin concentration. The water-based co-solvent method proposed herein may be useful for generating other nanofibrous natural polymers as well as being applicable in delivery systems for bioactive molecules within the nanofiber matrices.

In recent years, nanoparticles have been highly investigated in the laboratory. However, only a few laboratory discoveries have been translated into clinical practice. These findings in the laboratory are limited by trial-and-error methods to determine the optimum formulation for successful drug delivery. A new paradigm is required to ease the translation of lab discoveries to clinical practice. Due to their previous success in antiviral activity, it is vital to accelerate the discovery of novel drugs to treat and manage viruses. Machine learning is a subfield of artificial intelligence and consists of computer algorithms which are improved through experience. It can generate predictions from data inputs via an algorithm which includes a method built from inputs and outputs. Combining nanotherapeutics and well-established machine-learning algorithms can simplify antiviral-drug development systems by automating the analysis. Other relationships in bio-pharmaceutical networks would eventually aid in reaching a complex goal very easily. From previous laboratory experiments, data can be extracted and input into machine learning algorithms to generate predictions. In this study, poly (lactic-co-glycolic acid) (PLGA) nanoparticles were investigated in antiviral drug delivery. Data was extracted from research articles on nanoparticle size, polydispersity index, drug loading capacity and encapsulation efficiency. The Gaussian Process, a form of machine learning algorithm, could be applied to this data to generate graphs with predictions of the datasets. The Gaussian Process is a probabilistic machine learning model which defines a prior over function. The mean and variance of the data can be calculated via matrix multiplications, leading to the formation of prediction graphs—the graphs generated in this study which could be used for the discovery of novel antiviral drugs. The drug load and encapsulation efficiency of a nanoparticle with a specific size can be predicted using these graphs. This could eliminate the trial-and-error discovery method and save laboratory time and ease efficiency. [ABSTRACT FROM AUTHOR]

Dysfunction in the olfactory system of a person can have adverse effects on their health and quality of life. It can even increase mortality among individuals. Olfactory dysfunction is related to many factors, including post-viral upper respiratory infection, head trauma, and neurodegenerative disorders. Although some clinical therapies such as steroids and olfactory training are already available, their effectiveness is limited and controversial. Recent research in the field of therapeutic nanoparticles and stem cells has shown the regeneration of dysfunctional olfactory systems. Thus, we are motivated to highlight these regenerative approaches. For this, we first introduce the anatomical characteristics of the olfactory pathway, then detail various pathological factors related to olfactory dysfunctions and current treatments, and then finally discuss the recent regenerative endeavors, with particular focus on nanoparticle-based drug delivery systems and stem cells. This review offers insights into the development of future therapeutic approaches to restore and regenerate dysfunctional olfactory systems. [ABSTRACT FROM AUTHOR]

Brain diseases including neurodegenerative disorders and tumours are among the most serious health problems, degrading the quality of life and causing massive economic cost. Nanoparticles that load and deliver drugs and genes have been intensively studied for the treatment of brain diseases, and have demonstrated some biological effects in various animal models. Among other efforts taken in the nanoparticle development, targeting of blood brain barrier, specific cell type or local intra-/extra-cellular space is an important strategy to enhance the therapeutic efficacy of the nanoparticle delivery systems. This review underlies the targeting issue in the nanoparticle development for the treatment of brain diseases, taking key exemplar studies carried out in various in vivo models. [ABSTRACT FROM AUTHOR]

Vascularization is a key issue for the success of tissue engineering to repair damaged tissue. In this study, we report a composite scaffold delivering angiogenic factor for this purpose. Vascular endothelial growth factor (VEGF) was loaded on mesoporous silica nanoparticle (MSN), which was then incorporated within a type I collagen sponge, to produce collagen/MSN/VEGF (CMV) scaffold. The CMV composite scaffold could release VEGF sustainably over the test period of 28 days. The release of VEGF improved the cell proliferation. Moreover, the in vivo angiogenesis of the scaffold, as studied by the chick chorioallantoic membrane (CAM) model, showed that the VEGF-releasing scaffold induced significantly increased number of blood vessel complexes when compared with VEGF-free scaffold. The composite scaffold showed good biocompatibility, as examined in rat subcutaneous tissue. These results demonstrate that the CMV scaffold with VEGF-releasing capacity can be potentially used to stimulate angiogenesis and tissue repair. [ABSTRACT FROM AUTHOR]

Increasing amounts of metal-based implants are used for orthopedic or dental surgeries throughout the world. Still several implant-related problems such as inflammation, loosening and bacterial infection are prevalent. These problems stem from the immediate microbial contamination and failure of initial osteoblast adhesion. Additionally, bacterial infections can cause serious and life-threatening conditions such as osteomyelitis. Here, antibiotic (gentamicin)-loaded silk protein fibroin (non-mulberry silkworm, Antheraea mylitta) nanoparticles are fabricated and deposited over the titanium surface to achieve sustained drug release in vitro and to alter the surface nano-roughness. Based on the altered surface topography, chemistry and antibacterial activity, we conclude that the nanoparticle-deposited surfaces are superior for osteoblast adhesion, proliferation and differentiation in comparison to bare Ti. This method can be utilized as a cost-effective approach in implant modification. From the Clinical Editor Titanium-based implants are commonly used in the field of orthopedics or dentistry. Surface modification of an implant is vital to ensure osseointegration. In this article, the author investigated the use of silk protein fibroins for metal surface modification and also for drug delivery against bacteria. The encouraging data should provide a new method in terms of nanotechnology in the respective clinical fields. [ABSTRACT FROM AUTHOR]

Moldable hydrogels that incorporate stem cells hold great promise for tissue engineering. They secure the encapsulated cells for required periods while allowing a permeable exchange of nutrients and gas with the surroundings. Core–shell fibrous structured hydrogel system represents these properties relevant to stem cell delivery and defect-adjustable tissue engineering. A designed dual concentric nozzle is used to simultaneously deposit collagen and alginate with a core–shell structured continuous fiber form in the ionic calcium bath. We aimed to impart extrinsic osteogenic cues in the nanoparticulate form, i.e., bioactive glass nanoparticles (BGn), inside the alginate shell, while encapsulating rat mesenchymal stem cells in the collagen core. Ionic measurement in aqueous solution indicated a continuous release of calcium ions from the BGn-added and -free scaffolds, whereas silicon was only released from the BGn-containing scaffolds. The presence of BGn allowed higher number of cells to migrate into the scaffolds when implanted in subcutaneous tissues of rat. Cell viability was preserved in the presence of the BGn, with no significant differences noticed from the control. The presence of BGn enhanced the osteogenic differentiation of the encapsulated rat mesenchymal stem cells, presenting higher levels of alkaline phosphatase activity as well as bone related genes, including collagen type I, bone sialoprotein and osteocalcin. Taken together, the incorporated BGn potentiated the capacity of the core–shell fibrous hydrogel system to deliver stem cells targeting bone tissue engineering. [ABSTRACT FROM AUTHOR]

The survival of cells in the 3D scaffold until the ingrowth of blood vessels is one of the most important challenges in tissue engineering for producing a clinically relevant volume of tissue. In this study, perfluorooctane emulsion (oxygen carrier)-loaded hollow microparticles (PFO-HPs) were prepared as a scaffolding system which can allow timely release of oxygen to cells adhered on the HPs to prevent cell necrosis in a hypoxic environment (inherently created in tissue engineered 3D constructs) until new blood vessels are formed in the 3D cell construct, and thus may produce appropriate tissues/organs with a clinically relevant volume. In the in vitro cell culture and the in vivo animal study, it was observed that the cells initially seeded on the PFO-HPs remained alive for approximately 10 days in a hypoxic environment ( in vitro ), and the cells were also found throughout the implanted whole matrix without a necrotic center until the infiltration of blood vessels (at 14 days after implantation; in vivo ), probably due to the sufficient release of oxygen from the PFO-HPs for an adequate time period. Based on these results, the cell-based PFO-HPs can be a promising system to produce a clinically applicable large tissue mass. [ABSTRACT FROM AUTHOR]

Reactive oxygen species (ROS) are continuously produced by skeletal muscle during contractile activity and even at rest. However, the ROS generated from excessive exercise or traumatic damage may produce more ROS than can be neutralized by an antioxidant capacity, which can be harmful to muscle function. In particular, selenium is a known antioxidant that regulates physiological functions such as cell differentiation and anti-inflammatory function. In this study, we developed nano-sized antioxidative biomaterials using selenium to investigate the protective and differentiation effects against C2C12 myoblasts in an H2O2-induced oxidative stress environment. The selenium nanoparticles (SeNPs) were produced with a size of 35.6 ± 4.3 nm and showed antioxidant effects according to the 3,3′,5,5′-tetramethylbenzidine assay. Then, SeNPs were treated to C2C12 cells with or without H2O2. Our results showed that SeNPs reduced C2C12 apoptosis and intracellular ROS levels. Additionally, SeNPs effectively up-regulated in the presence of H2O2, MyoD, MyoG, α-actinin, and myosin heavy chain, which are well known to increase during myoblast differentiation as assayed by qRT-PCR, immunocytochemistry-staining, western blotting. These results demonstrate that SeNPs can accelerate differentiation with its protective effects from the ROS environment and can be applied to the treatment of skeletal muscle in a cellular redox environment. [ABSTRACT FROM AUTHOR]

[Display omitted] • Fe-BGn were prepared by a facile one-pot ultrasonic-coupled sol–gel synthesis. • Adding 10% Fe 2 O 3 to BGn significantly reduced particle size from 65 nm to <20 nm. • Fe-BGn exhibited high SSA up to 288 m2/g and high total pore volume ca. 0.43 cm3/g. • Fe-BGn showed sustained release of Fe3+ ions with zero-order release kinetics. • Fe-BGn were designed for use as ferroptosis-based bone cancer nanotherapeutics. Here, Fe ions-releasing mesoporous bioactive glass ultrasmall nanoparticles (Fe-BGn) were prepared by a facile one-pot ultrasonic-coupled sol–gel synthesis designed for use as ferroptosis-based bone cancer nanotherapeutics. The addition of 10% Fe 2 O 3 to 85% SiO 2 – 15% CaO by weight significantly reduced the particle size from about 65 nm to < 20 nm along with concurrent increase of the specific surface area (SSA) from 44.7 to 288.1 m2/g. Of note, Fe-BGn showed highly sustained Fe ions release (2.20 ± 0.12 ppm/day) with almost zero-order release kinetics, while exhibiting detectable bone-like hydroxyapatite (HA) formation within 2 weeks. The Fe ions-releasing, highly mesoporous and adequately bioactive Fe-BGn could be applied for ferroptosis-based bone cancer treatment. [ABSTRACT FROM AUTHOR]

Reactive oxygen species (ROS) regulate various functions of cells, including cell death, viability, and differentiation, and nanoparticles influence ROS depending on their size and shape. Selenium is known to regulate various physiological functions, such as cell differentiations and anti-inflammatory functions, and plays an important role in the regulation of ROS as an antioxidant. This study aims to investigate the effect of selenium nanoparticles (SeNPs) on the differentiation of osteogenic MC3T3-E1 cells. After fabrication of SeNPs with a size of 25.3 ± 2.6 nm, and confirmation of its oxidase-like activity, SeNPs were added to MC3T3-E1 cells with or without H2O2: 5~20 μg/mL SeNPs recovered cells damaged by 200 μM H2O2 via the intracellular ROS downregulating role of SeNPs, revealed by the ROS staining assay. The increase in osteogenic maturation with SeNPs was gradually investigated by expression of osteogenic genes at 3 and 7 days, Alkaline phosphatase activity staining at 14 days, and Alizarin red S staining at 28 days. Therefore, the role of SeNPs in regulating ROS and their therapeutic effects on the differentiation of MC3T3-E1 cells were determined, leading to possible applications for bone treatment. [ABSTRACT FROM AUTHOR]

Nanoparticle-based therapeutics delivery holds great promise for the treatment of intractable diseases. The high loading of drug molecules and their precise delivery to target sites are needed to gain optimal therapeutic functions of the nanoparticle delivery system. In this communication, we highlight, among other properties of nanoparticles (e.g. size, shape, surface chemistry, and degradation), the nanoscale topography, which has recently been shown to be an important parameter, ultimately determining drug loading, cell penetration, and body clearance. This nanotopographical aspect is considered to offer a new effective strategy to the development of nanoparticles for drug and gene delivery with enhanced therapeutic outcome. [ABSTRACT FROM AUTHOR]

Abstract: Silica nanoparticles (SNs) with a nanoporous structure are attractive for the delivery of biomolecules. This study developed a SNs-based protein delivery system with nanopore sizes large enough to uptake protein molecules. The use of trioctylmethylammonium bromide (TOMAB) as an auxiliary chemical facilitated a dramatic increase in pore size from 2.6nm to 17.4nm. The surface was highly negatively-charged with a zeta potential of approximately −35 at pH 7. Positively-charged protein cytochrome C was encapsulated effectively within the large pore spaces of the SNs, with a protein loading capacity of almost 2-fold increase due to the pore size increase. The loaded protein exhibited sustained release for approximately one week with an initial burst in a day, suggesting the SNs tailored with enlarged nanopores should be useful for the delivery of large protein molecules for tissue regeneration. [Copyright &y& Elsevier]

Nanocarriers are one of the key elements to improve the therapeutic potential of signaling molecules, including genes for the disease treatment and tissue repair. Here, a nanocarrier system is reported that delivers genetic molecule small interference RNA (siRNA) for osteoblastic stimulation. For this, a hollow form of mesoporous silica nanoshell (MSns) is designed to load and release siRNA to silence Plekho-1 gene. In particular, a pressure-induced loading method is effective in enhancing the incorporation of siRNA within a hollow space; a loading level attained ≈30% is almost three times higher than that of a non-hollow form. Furthermore, the release of siRNA from the nanocarriers is highly sustainable; continued over 18 d in a diffusion-controlled manner, in striking contrast to the rapid release (3 d) from a non-hollow form. The nanocarriers exhibit excellent cell viability, and the siRNA-nanocarrier complexes are efficiently internalized to osteoblastic cells (uptake level over 90%). The intracellular delivery suppresses the target gene Plekho-1 expression down to 20%, which in turn up-regulates the expression of osteoblast transcriptional factors (Runx2 and Smad2), demonstrating an effective gene delivery system for bone repair. [ABSTRACT FROM AUTHOR]

Vascularization is a key issue for the success of tissue engineering to repair damaged tissue. In this study, we report a composite scaffold delivering angiogenic factor for this purpose. Vascular endothelial growth factor (VEGF) was loaded on mesoporous silica nanoparticle (MSN), which was then incorporated within a type I collagen sponge, to produce collagen/MSN/VEGF (CMV) scaffold. The CMV composite scaffold could release VEGF sustainably over the test period of 28 days. The release of VEGF improved the cell proliferation. Moreover, the in vivo angiogenesis of the scaffold, as studied by the chick chorioallantoic membrane (CAM) model, showed that the VEGF-releasing scaffold induced significantly increased number of blood vessel complexes when compared with VEGF-free scaffold. The composite scaffold showed good biocompatibility, as examined in rat subcutaneous tissue. These results demonstrate that the CMV scaffold with VEGF-releasing capacity can be potentially used to stimulate angiogenesis and tissue repair. [ABSTRACT FROM AUTHOR]

Abstract: Here we produced macroporous and nanofibrous scaffolds with bioactive nanocomposite composition, poly(lactic acid) (PLA) incorporating bioactive glass nanoparticles (BGnp) up to 30 wt%, targeting bone regeneration. In particular, the nanofibrous structure in the scaffolds was generated by using a bicyclic monoterpene, camphene (C10H16), through a phase-separation process with PLA-BGnp phase in chloroform/1,4-dioxane co-solvent. Furthermore, macropores were produced by the impregnation of salt particles and their subsequent leaching out, followed by freezing and lyophilization processes. The produced PLA-BGnp scaffolds presented highly porous and nanofibrous structure with porosities of 90–95% and pore sizes of over hundreds of micrometers. BGnp with sizes of ∼90 nm were also evenly impregnated within the PLA matrix, featuring a nanocomposite structure. The nanofibrous scaffolds exhibited enhanced hydrophilicity and more rapid hydrolytic degradation as the incorporated BGnp content increased. The bone-bioactivity of the scaffolds was substantially improved with the incorporation of BGnp, exhibiting rapid formation of apatite throughout the scaffolds in a simulated body fluid. The developed macroporous and nanofibrous scaffolds with PLA-BGnp bioactive composition are considered as a novel 3D matrix potentially useful for bone tissue engineering. [Copyright &y& Elsevier]