Search

Alzheimer's disease (AD), known as a progressive neurodegenerative disorder, has had a terrible impact on the health of aged people. Due to its severity, early diagnosis of AD is significant to retard the progress and provide timely treatment. Here, we report a fluorescence ratio detection of AD biomarker amyloid β oligomers (AβOs) by combining highly doped upconversion nanoparticles-SiO 2 @metal-organic framework/black hole quencher (H-USM/BHQ-1) microspheres with optical tweezer (OT) microscopic imaging. Optical trapping a single microsphere not only avoids the interference of fluid viscosity but also provides a high power density laser source to efficiently stimulate upconversion luminescence (UCL) of highly doped upconversion nanoparticles (H-UCNPs). Under this condition, H-UCNPs show stronger UCL and greater power-dependent properties compared to low-doped ones. Moreover, the closely packed quenching molecules BHQ-1 on a metal-organic framework (ZIF-8) exhibit excellent quenching efficiency for upconversion 525 and 540 nm emission. Also, the luminescent resonance energy transfer efficiency reaches 89.58%. When different concentrations of AβOs are present, the UCL 540 recovers due to the decomposition of ZIF-8 and the release of BHQ-1. Using 540 and 654 nm emission ratio of highly doped UCNPs as reporters, the limit of detection reaches 28.4 pM for the quantitative determination of AβOs. Besides, this strategy is able to selectively quantify the AβO concentration. Therefore, we demonstrated the combination of optical trapping and highly doped UCNPs which is applied for the detection of AβOs with high sensitivity and specificity.

We incorporate three conceptual components including luminescence-concentrating upconversion nanoparticles, optical tweezers, and DNA walkers into bead carriers to establish a new imaging analysis.

Although plentiful advanced fluorescence sensors have achieved to analyze microRNAs (miRNAs) in living cells, the prerequisite relating to nucleic acids specific recognition based sensing principle compels them lack favorable accurancy and stability in such complicated biological mediums. Here, we make a double breakthrough for the two challenges by combining a near-infrared (NIR) light powering process with a DNA tetrahedron (DNAT)-based protection concept. In this sensing system, a special nanomachine is first engineered by conjugating a core-shell-structured upconversion nanoparticle capable of highly converting 808 nm NIR photons into ultraviolet ones with self-assembling DNATs. The newly developed nanostructure not only prevents the sensing pathway from triggering during the intracellular delivery as well as reducing the adverse thermal effect for cell viability but also significantly enhances the enzyme resistance to avoid degradation to produce false signals. Furthermore, a fluorescence resonance energy transfer sensing strategy is rationally designed on this nanomachine. Upon using the powering light to excite the upconversion luminescence to activate the nanomachine in living cells, it can stably trace the precise level changes of miRNA-21 sequences at the reaching position with an "off-on" mode of fluorescence outputs.

We demonstrate an effective approach to realize active and real-time temperature monitoring around the gold nanobipyramids (AuNBPs)-labeled cancer cell under 808 nm laser irradiation by combining optical tweezers and temperature-sensitive upconversion microparticles (UCMPs). On the one hand, the aptamer-modified AuNBPs that absorb laser at 808 nm not only act as an excellent photothermal reagent but also accurately and specifically bind the target cancer cells. On the other hand, the single optically trapped NaYF 4 :Yb 3+ , Er 3+ UCMPs with a 980 nm laser exhibit temperature-dependent luminescence properties, where the intensity ratio of emission 525 and 547 nm varies with the ambient temperature. Therefore, real-time temperature variation monitoring is performed by 3D manipulation of the trapped single UCMP to control its distance from the AuNBPs-labeled cancer cell while being photothermally killed. The results show distance-related thermal propagation because the temperature increase reaches as high as 10 °C at a distance of 5 μm from the cell, whereas the temperature difference drops rapidly to 5 °C when this distance increases to 15 μm. This approach shows that the photothermal conversion from AuNBPs is sufficient to kill the cancer cells, and the temperature increase can be controlled within the micrometer level at a certain period of time. Overall, we present a micrometer-size thermometer platform and provide an innovative strategy to measure temperature at the micrometer level during photothermal killing of cancer cells.

Herein, a conceptual approach for significantly enhancing a bead-supported assay is proposed. For the fluorescence imaging technology, optical tweezers are introduced to overcome the fluid viscosity interference and immobilize a single tested bead at the laser focus to guarantee a fairly precise imaging condition. For the selection of fluorescent materials and the signal acquisition means, a type of innovative luminescence confined upconversion nanoparticle with a unique sandwich structure is specially designed to act as an efficient energy donor to trigger the luminescent resonance energy transfer (LRET) process. By further combining the double breakthrough with a molecular beacon model, the newly developed detection strategy allows for achieving a pretty high LRET ratio (≈ 88%) to FAM molecules and offering sound assay performance toward miRNA analysis with a detection limit as low as the sub-fM level, and is capable of well identifying single-base mismatching. Besides, this approach not only is able to accurately qualify the low-abundance targets from as few as 30 cancer cells but also can be employed as a valid cancer early warning tool for performing liquid biopsy.

The world health organization figures show prostate cancer in developed countries has been the second primary cause of cancer mortality following lung cancer for the men. So, early and sensitive diagnosis of cancer is very important before it spreads out to the other organs of the body. It is well-known that prostate-specific antigen (PSA) is the most specific and efficient tumor marker for the diagnosis of prostate cancer. Herein, we successfully fabricated core-shell composite fluorescent nanoparticle Ag@SiO 2 @SiO 2 -RuBpy which provide a photoluminescence enhancement of up to ~3-fold when the separation distance between the surface of silver core and the center of the third RuBpy doped silica shell is about 10nm. These core-shell MEF-capable nanoparticles have obvious advantages. The interaction between the doped RuBpy molecules in the outer silica layer and the silver core, greatly improves the excitation efficiency and enhances the fluorescence intensity. Importantly, the presence of silica can reduce the self-quenching of RuBpy, which makes larger amounts of RuBpy incorporated into the silica shell. In addition, the shell protects the RuBpy against collisional quenching and irreversible photodegradation and provides abundant hydroxyl for easy conjugation. After that a highly sensitive, specific and reliable strategy based on metal-enhanced fluorescence and magnetic separation was applied for the detection of PSA in both buffer and serum. The process could be rapidly accomplished, in which the immunomagnetic nanospheres (IMNs) and immunofluorescent nanoparticles (IFNs) were used to capture and identify the target molecules simultaneously. A good linear relationship between the fluorescence intensity and the concentration of PSA (0.1-100ng/mL) with a detection limit 27pg/mL was obtained., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Based on the remarkable difference between the interactions of carbon nanoparticles (CNPs) oxide with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA), and the fact that fluorescence of DNA-stabilized silver nanoclusters (AgNCs) can be quenched by CNPs oxide, DNA-functionalized AgNCs were applied as label-free fluorescence probes and a novel fluorescence resonance energy transfer (FRET) sensor was successfully constructed for the detection of human immunodeficiency virus (HIV) DNA sequences. CNPs oxide were prepared with the oxidation of candle soot, hence it is simple, time-saving and low-cost. The strategy of dual AgNCs probes was applied to improve the detection sensitivity by using dual- probe capturing the same target DNA in a sandwich mode and as the fluorescence donor, and using CNPs oxide as the acceptor. In the presence of target DNA, a dsDNA hybrid forms, leading to the desorption of the ssDNA-AgNCs probes from CNPs oxide, and the recovering of fluorescence of the AgNCs in a HIV-DNA concentration-dependent manner. The results show that HIV-DNA can be detected in the range of 1-50nM with a detection limit of 0.40nM in aqueous buffer. The method is simple, rapid and sensitive with no need of labeled fluorescent probes, and moreover, the design of fluorescent dual-probe makes full use of the excellent fluorescence property of AgNCs and further improves the detection sensitivity., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A method of fluorescent nanoparticle-based indirect immunofluorescence assay using either fluorescence microscopy or flow cytometry for the rapid detection of pathogenic Escherichia coli O157:H7 was developed. The dye-doped silica nanoparticles (NPs) were synthesized using W/O microemulsion methods with the combination of 3-aminopropyltriethoxysilane (APTES) and fluorescein isothiocyanate (FITC) and polymerization reaction with carboxyethylsilanetriol sodium salt (CEOS). Protein A was immobilized at the surface of the NPs by covalent binding to the carboxyl linkers and the surface coverage of Protein A on NPs was determined by the Bradford method. Rabbit anti-E. Coli O157:H7 antibody was used as primary antibody to recognize E. coli O157:H7 and then antibody binding protein (Protein A) labeled with FITC-doped silica NPs (FSiNPs) was used to generate fluorescent signal. With this method, E. Coli O157:H7 in buffer and bacterial mixture was detected. In addition, E. coli O157:H7 in several spiked background beef samples were measured with satisfactory results. Therefore, the FSiNPs are applicable in signal-amplified bioassay of pathogens due to their excellent capabilities such as brighter fluorescence and higher photostability than the direct use of conventional fluorescent dyes., (Copyright © 2014 Elsevier B.V. All rights reserved.)

We report an indirect method for cancer cell recognition using photostable fluorescent silica nanoprobes as biological labels. The dye-doped fluorescent silica nanoparticles were synthesized using the water-in-oil (W/O) reverse microemulsion method. The silica matrix was produced by the controlled hydrolysis of tetraethylorthosilicate (TEOS) in water nanodroplets with the initiation of ammonia (NH3·H2O). Fluorescein isothiocyanate (FITC) or rhodamine B isothiocyanate conjugated with dextran (RBITC-Dextran) was doped in silica nanoparticles (NPs) with a size of 60 ± 5 nm as a fluorescent signal element by covalent bonding and steric hindrance, respectively. The secondary antibody, goat anti-rabbit IgG, was conjugated on the surface of the PEG-terminated modified FITC-doped or RBITC-Dextran-doped silica nanoparticles (PFSiNPs or PBSiNPs) by covalent binding to the PEG linkers using the cyanogen bromide method. The concentrations of goat anti-rabbit IgG covering the nanoprobes were quantified via the Bradford method. In the proof-of-concept experiment, an epithelial cell adhesion molecule (EpCAM) on the human breast cancer SK-Br-3 cell surface was used as the tumor marker, and the nanoparticle functionalized with rabbit anti-EpCAM antibody was employed as the nanoprobe for cancer cell recognition. Compared with fluorescent dye labeled IgG (FITC-IgG and RBITC-IgG), the designed nanoprobes display dramatically increased stability of fluorescence as well as photostability under continuous irradiation.

In this work, we have prepared three types of aptamer-conjugated Rubpy-doped silica nanoparticles for Human breast carcinoma MCF-7 cells labeling. Probe A is prepared through covalent conjugation between amine-labeled MUC-1 aptamer and carboxyl-modified Rubpy-doped NPs (NPs-aptamer). Probe B is prepared based on the interaction between biotin-labeled MUC-1 aptamer and avidin-conjugated Rubpy-doped NPs (NPs-avidin-biotin-aptamer). For Probe C, there is a PEG with flexible long chain as the bridge between avidin and the NPs (NPs-PEG-avidin-biotin-aptamer). In addition, we further investigate the practical number of MUC-1 aptamers on an NP of each probe using hoechst33258 dye. The binding efficiency of MUC-1 aptamer on the three types of probes as follows: Probe A < Probe B < Probe C. In addition, microscopic fluorescence imaging shows that Probe C containing the PEG molecules can be effectively applied for the recognition of MUC-1 protein in human breast carcinoma MCF-7 cells thus demonstrates that the PEG with flexible long chain as the bridge between the aptamer and NP can greatly enhances the freedom of MUC-1 aptamer. Compared with common organic dyes, the dye-doped silica nanoparticles serve as a stable bioprobe because of their facile conjugation with the desirable biomolecules, and have exhibited great potential in bioanalysis., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Progress in biomedical imaging depends on the development of bioprobes with a high sensitivity and stability. Fluorescent silica nanoparticles (NPs) covalent conjugation of avidin has been proposed for cancer cells imaging by fluorescence microscopy. Uniform silica NPs were prepared using water-in-oil (W/O) microemulsion methods and primary amine groups were introduced onto the surface of the NPs by condensation of tetraethyl orthosilicate (TEOS). Optically stable organic dyes, tris(2,2'-bipyridyl) dichlororuthenium(II) hexahydrate (Rubpy), were doped inside the silica NPs. The amine functions were transferred to carboxyl groups coupled with a linker elongation. Avidin was immobilized at the surface of the NPs by covalent binding to the carboxyl linkers. The binding capacity of the avidin-covered NPs for ligand biotin was quantified by titration with biotin(5-fluorescein) conjugate to 1.25 biotin binding sites/100 nm(2). We used biotinylated antibody and cell recognition by fluorescence microscopy imaging technique. The lung carcinoma cells were identified easily with high efficiency using these antibody-coated NPs. By comparison with fluorescein isothiocyanate (FITC), dye-doped silica NPs display dramatically increased stability of fluorescence as well as photostability, as compared to the common organic dye, when under continuous irradiation., (Copyright © 2012 Elsevier B.V. All rights reserved.)

By using near-infrared surface-enhanced Raman scattering (SERS) with 60 nm gold nanoparticles (Au-NPs) to probe the chemical composition inside single human osteosarcoma cells we have shown that the SERS intensity may increase by a factor of 3-6 times in different parts of the cells depending on the density of gold nanoaggregates within the probed volume after the cell is dehydrated. The cellular points of low-density gold nanoaggregates exhibit more significant increase of SERS signal levels, the cellular macrochemicals such as nucleic acids show conformational changes, and new components can be probed after the cell is completely dried. A comparative study between viable and apoptotic cells indicates that most of the Au-NPs that enter the living cell reside in the cytoplasm and around the nucleus, whereas glyoxal-induced apoptotic cells show relatively uniform distribution of Au-NPs and, interestingly, the presence of DNA fragments is detected throughout the cell, including the cell surface.