Search

Single-photon detectors (SPDs) that can sense individual photons are the most sensitive instruments for photodetection. Established SPDs such as conventional silicon or III-V compound semiconductor avalanche diodes and photomultiplier tubes have been used in a wide range of time-correlated photon-counting applications, including quantum information technologies, in vivo biomedical imaging, time-of-flight 3D scanners, and deep-space optical communications. However, further development of these fields requires more sophisticated detectors with high detection efficiency, fast response, and photon-number-resolving ability, etc. Thereby, significant efforts have been made to improve the performance of conventional SPDs and to develop new photon-counting technologies. In this review, the working mechanisms and key performance metrics of conventional SPDs are first summarized. Then emerging photon-counting detectors (in the visible to infrared range) based on 0D quantum dots, 1D quantum nanowires, and 2D layered materials are discussed. These low-dimensional materials exhibit many exotic properties due to the quantum confinement effect. And photodetectors built from these nD-materials (n = 0, 1, 2) can potentially be used for ultra-weak light detection. By reviewing the status and discussing the challenges faced by SPDs, this review aims to provide future perspectives on the research directions of emerging photon-counting technologies., (© 2021 Wiley-VCH GmbH.)

An efficient ferroelectric-enhanced side-gated single CdS nanowire (NW) ultraviolet (UV) photodetector at room temperature is demonstrated. With the ultrahigh electrostatic field from polarization of ferroelectric polymer, the depletion of the intrinsic carriers in the CdS NW channel is achieved, which significantly reduces the dark current and increases the sensitivity of the UV photodetector even after the gate voltage is removed. Meanwhile, the low frequency noise current power of the device reaches as low as 4.6 × 10−28 A2 at a source-drain voltage Vds = 1 V. The single CdS NW UV photodetector exhibits high photoconductive gain of 8.6 × 105, responsivity of 2.6 × 105 A W−1, and specific detectivity ( D*) of 2.3 × 1016 Jones at a low power density of 0.01 mW cm−2 for λ = 375 nm. In addition, the spatially resolved scanning photocurrent mapping across the device shows strong photocurrent signals near the metal contacts. This is promising for the design of a controllable, high-performance, and low power consumption ultraviolet photodetector. [ABSTRACT FROM AUTHOR]

Correlated vanadium dioxide (VO2) has shown promises in functional materials and advanced electronic devices with outstanding metal–insulator transition (MIT). The manipulations of MIT and structural phase transition in correlated oxides are among the major challenges in both fundamental science and technological applications. Herein, the modulation of MIT behaviors in one VO2 nanowire with an artificial oxidized domain induced by selected‐area chemical nanoengineering is described. The formation of an artificial oxidized domain enables to suppress MIT and stabilize the insulating phase above the MIT temperature of pristine VO2 nanowires, which leads to an enhanced MIT hysteresis and temperature. The creation of artificial domains and the modulation of MIT in correlated oxide nanowires help to both investigate the essential physics behind correlated nanomaterials and fabricate nanoscale multifunctional devices. [ABSTRACT FROM AUTHOR]