Search

Clays are considered great nanoadsorbents for many materials, including textile dyes. The use of these materials for cleaning textile wastewater is well known; however, it is not at all common to find applications for the hybrid materials formed from the clay and dye. In this work, a dye-loaded clay material was used to make new dye baths and colour a polyester textile substrate. The same hybrid could be used several times as it did not use all the adsorbed dye in a single dyeing. The hybrid obtained from hydrotalcite (nanoclay) and the dispersed red 1 dye was analysed by measuring the colour obtained, carrying out an X-ray diffraction analysis that provided information after each desorption–dyeing process, and using infrared spectroscopy to analyse the specific bands of each characteristic group. Both analyses showed that the amount of dye present in the hybrid decreases. Thermogravimetry (TGA), surface area and porosity measurements (BET), and X-ray photoelectron spectroscopy (XPS) tests were conducted. Chemical stability was assessed by subjecting the hybrid to the actions of different reagents. In addition, colour fastness tests were carried out after dyeing and washing the polyester test tubes to check for the correct fixing of the dye to the fibre. These fastness results showed that the dyeing was carried out correctly and as if it was a conventional dyeing process. [ABSTRACT FROM AUTHOR]

Three-dimensional printing technology is being increasingly applied in a multitude of sectors. However, this technology is not generally applied in the same way as in other sectors, possibly due to the difficulty of adhesion between the polymer and the textile substrate. A textile garment is subjected to wear and tear during its lifetime, and a low tensile strength or rubbing resistance hinders a garment in most of the applications of this type of research. This study examined the influence of the characteristics of the cotton textile substrate, such as the weave structure and the yarn thickness, on the tensile strength of a 3D-printed element with conductive filament. Starting from the fabric with the highest tensile strength, different prints were made using this technology to incorporate conductive and heating properties into the fabric. The results validate the possibility of providing new properties to the textile by means of this technology; however, the correct selection of the textile used as a base substrate is important. [ABSTRACT FROM AUTHOR]

Textile effluents are among the most polluting industrial effluents in the world. Textile finishing processes, especially dyeing, discharge large quantities of waste that is difficult to treat, such as dyes. By recovering this material from the water, in addition to cleaning and the possibility of reusing the water, there is the opportunity to reuse this waste as a raw material for dyeing different textile substrates. One of the lines of reuse is the use of hybrid nanoclays obtained from the adsorption of dyes, which allow dye baths to be made for textile substrates. This study analyses how, through the use of the nanoadsorbent hydrotalcite, dyes classified by their charge as anionic, cationic and non-ionic can be adsorbed and recovered for successful reuse in new dye baths. The obtained hybrids were characterised by X-ray diffraction and infrared spectroscopy. In addition, the colour was analysed by spectrophotometer in the UV-VIS range. The dyes made on cotton, polyester and acrylic fabrics are subjected to different colour degradation tests to assess their viability as final products, using reflection spectroscopy to measure the colour attribute before and after the tests, showing results consistent with those of a conventional dye. [ABSTRACT FROM AUTHOR]

Throughout history, mineral clays have had a multitude of applications. With recent developments in the textile industry, they have been used for their antimicrobial properties. As a promising phyllosilicate with a negative layer charge, montmorillonite (MMT) was used in this work to treat cotton fabric to evaluate its ability to generate negative air ions (NAIs). The MMT was dispersed with varying binder concentrations. Resins of different composition (polyurethane or acrylic) was applied to cotton fabric by padding, and the negative ion count was measured. Two types of MMT with different characteristics were tested. Electronic microscopy (SEM) was used to study the presence of MMT particles on the cotton fabric surface, and the colors of the samples were tested. It was observed that the composition of the binder used had a significant influence on the number of negative ions released by the treated sample. [ABSTRACT FROM AUTHOR]

Copyright of Industria Textila is the property of Institutul National de Cercetare-Dezvoltare pentru Textile si Pielarie and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Industria Textila is the property of Institutul National de Cercetare-Dezvoltare pentru Textile si Pielarie and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Posidonia oceanica is the most extended sea grass in the Mediterranean Sea. Important quantities of this alga are accumulated on coasts making necessary the cleaninness of those beaches where it can be found. For this reason, many authors are developmenting new products made by this raw material, like green composites or are studing this material to be used as biomass, for example. The aim of this study is to dye the Posidonia Oceanica fiber using commercial natural dye to change their appearance to get a material more attractive for different areas. To achieve this aim, fibers were scoured and bleached in order to remove the brown colour of the Posidonia Oceanica fibers. Scoured and bleached processes were followed by the treatment done for cellulosic fibers, because some researches indicate that P. Oceanica is composed of high quantity of cellulose. Different types of biomordants were use in the pre-treatment of the fiber to improve the affinity between the fiber and the dye used. To compare the results, we evaluate the colour of each sample using CIELAB parameters and colour differences (ΔE*), which are obtained by reflexion spectrophotometre. The results showed that medium molecular weight chitosan, which was used as biomordant, gets the highest intensity of colour [ABSTRACT FROM AUTHOR]

Natural dyes derived from flora and fauna are believed to be safe because of non-toxic, noncarcinogenic and biodegradable nature. Furthermore, natural dyes do not cause pollution and waste water problems. Natural dyes as well as synthetic dyes need the optimum parameters to get a good dyeing. On some occasions, It is necessary the use of mordants to increase the affinity between cellulose fiber and natural dye, but there are other conditions to optimize in the dyeing process, like time, temperature, auxiliary porducts, etc. In addition, the optimum conditions are different depends on the type of dye and the fiber nature. The aim of this work is the use of carrot extract to dye cotton fabric by exhaustion at diverse dyeing conditions. Diffferent dyeing processes were carried out to study the effect of pH condition and the temperature, using 7, 6 and 4 pH values and 95 °C and 130°C for an hour. As a result some images of dyed samples are shown. Moreover, to evaluate the colour of each sample CIELAB parameters are analysed obtained by reflexion spectrophotometre. The results showed that the temperature used has an important influence on the colour of the dyed sample. [ABSTRACT FROM AUTHOR]