Search

The Sinian Dengying Formation is a key target for deep oil and gas exploration in the Sichuan Basin, China. Natural gas was mainly distributed in the Ziyang–Weiyuan area (ZWA) and the Gaoshiti–Moxi area (GMA). At present, the genetic types and sources of natural gas are still unclear and controversial. The chemical composition, stable carbon isotopes, and biomarkers were used to analyze geochemical characteristics, genetic types, and gas–source relations. The results showed that the composition and content of hydrocarbon gas in the ZWA and GMA were similar. Natural gas was a typical dry gas with an average dry coefficient (C 1 /C 1 +) of 0.9991, which reflected higher methane (CH 4) content and lower heavy hydrocarbon gas (C 2 +) content. For nonhydrocarbon gas, CO 2 (0.01%–26.34%), N 2 (0.03%–24.95%), H 2 S (0.10%–3.19%), and He (0.01%–0.37%) were mainly distributed. Compared with the GMA, the ZWA was characterized by higher N 2 content and lower CO 2 content. Although the carbon isotopes had not been reversed, the values of δ13C 2 –δ13C 1 were different between the ZWA and GMA, with the GMA having the higher value. The assemblage relation between the natural gas composition and carbon isotopes indicated that the natural gas type was dominated by oil-cracking gas. Mud-shale in the high maturity stage of thermal evolution greatly influenced on the content of N 2 and He. H 2 S mainly belonged to thermochemical sulfate reduction (TSR), and most of CO 2 was formed by deep carbonate metamorphism and TSR. The gas–source relation showed that natural gas in the ZWA was derived from the Cambrian Qiongzhusi Formation and that the gas in the GMA mainly originated from the Sinian Dengying Formation and the Cambrian Qiongzhusi Formation. The established hydrocarbon generation model indicated that the Sinian Dengying Formation is potentially gas-rich. • The Sinian Dengying Formation natural gas was a typical dry gas, dominated by oil-cracking gas. • Source rocks of the Qiongzhusi Formation and Dengying Formation were the mainly gas source for gas reservoirs. • The resource potential was qualitatively evaluated by the established hydrocarbon generation model. [ABSTRACT FROM AUTHOR]

Carbonate petroliferous basins usually develop fault-reservoir composite migration pathway systems. Accurate estimates of transport efficiency are important for locating oil and gas prospects, which is of considerable interest to oil explorers. The Cambrian Longwangmiao Formation in the Moxi–Gaoshiti area in the Sichuan Basin, the largest single monoblock gas accumulation in China with complicated migration pathway systems, was selected as an example to demonstrate the method. Using a combination of geologic, statistical, experimental data analyses, and quantitative characterization, a quantitative method for calculating the fault-reservoir composite transport efficiency is established for the first time. The results show that fault-reservoir composite migration pathway systems control the hydrocarbon accumulation. The analysis of data from 17 drilling wells using this method indicated a strong correlation between well productivity and composite transport efficiency, and the matching degree of actual and predicted results was as high as 83%. The best locations for oil and gas exploration are near areas with a high composite transport efficiency. Project planners can quickly find oil and gas prospects by matching calculated composite transport efficiencies to observed petroleum occurrences in a basin to avoid costly drilling mistakes. The method will have wide application in other carbonate basins around the world. • The fault-reservoir composite migration pathway controls hydrocarbon accumulation. • Quantitatively method for the composite transport efficiency is first established. • Composite transport efficiency is useful for location of oil and gas prospects. • Prospects for future drilling in the Moxi-Gaoshiti area of China are recommended. [ABSTRACT FROM AUTHOR]

Rhenium–osmium (Re–Os) geochronology is a robust technique for constraining the accurate timing of hydrocarbon evolution, but its effectiveness in over-mature petroleum systems has not been well constrained. Here we conduct a case study in the Neoproterozoic Sichuan Basin, China, i.e., the Sinian Dengying sequence (635–542 Ma). Re–Os isotopic data from this highly mature hydrocarbon reservoir yield a Re–Os isochron ages of 414 ± 44 Ma with an initial 187Os/188Os (Os i) of 1.36 ± 0.19 for bitumen and a 78 ± 37 Ma age with an Os i of 3.21 ± 0.17 for pyrobitumen. Coupled with thermal evolution of possible source rocks and fluid-inclusion homogenization temperatures, the 414 Ma age marks the timing of oil generation, and the 78 Ma age indicates the timing of gas generation associated with the thermal cracking of oil, and the formation of pyrobitumen in the reservoir. A comparison of the Os i of the 414 Ma bitumen and that of possible source rocks at the time of bitumen formation reveal that it was primarily sourced from shale of the lower Cambrian Qiongzhusi Formation. The results of this study provide new insights to better understand the over-mature oil–gas system in the Sinian Sichuan Basin, and show that Dengying Formation reservoirs in the depocenter areas of the basin are potentially favorable for oil and gas exploration. The results further highlight the utility of the Re–Os geochronometer to constrain the accurate age and source of hydrocarbon evolution. • Hydrocarbon evolution in Sinian Sichuan Basin was accurately dated by Re–Os geochronology. • Two Re–Os isochron ages were obtained at 414 Ma and 78 Ma. • The two ages mark the timing of oil generation and thermal cracking of oil, respectively. • The reservoir bitumens were sourced mainly from the lower Cambrian Qiongzhusi shales. • The Dengying Formation in the depocenter areas are potential reservoirs. [ABSTRACT FROM AUTHOR]