Search

IFMIF-DONES (International Fusion Material Irradiation Facility- DEMO Oriented NEutron Source) is an accelerator based irradiation facility which is aimed to provide the irradiation data needed for the construction of DEMO. The Test Cell (TC) is the central room of IFMIF-DONES enclosing the target and the test module. This work presents the neutronics analyses conducted to provide the relevant nuclear responses for the bio-shield of the TC, including heating, radiation damage and helium production. The results for the TC steel liners covering the inner TC surface have been obtained with an unstructured mesh based interpolation approach. The results show that the softening of the neutron spectrum at the thin layer of the inner wall increases the nuclear heating as well as the helium production in SS316 L. The helium production might be of major concern if re-welding of the liner is required during the lifetime. The impact of a reduced beam footprint size on the TC nuclear responses has been analyzed and found to be insignificant comparing with the normal footprint. [ABSTRACT FROM AUTHOR]

OpenMC is a community-developed Monte Carlo neutron and photon transport simulation code. It is capable of performing fixed source particle transport simulation based on continuous-energy nuclear cross-section data. In this work, OpenMC has been benchmarked and verified for the application to accelerator-based neutron sources, e.g. the International Fusion Material Irradiation Facility- DEMO Oriented NEutron Source facility (IFMIF-DONES). To this end, the McDeLicious code, which is an extension of the MCNP Monte Carlo code with the capability to simulate the deuterium-lithium neutron source on the basis of evaluated d + 6,7Li cross section data, has been migrated to the OpenMC code. The OpenMC-McDeLicious has been tested for the calculation of uncollided neutron and photon flux and spectra by comparing to results obtained with MCNP6-McDeLicious. SINBAD experimental benchmarks and d -Li experiments have been used for validating OpenMC. These tests and verifications show good agreement between OpenMC and MCNP code, as well as the experimental data. In addition, OpenMC-McDeLicious is used for obtaining the nuclear responses, e.g. Displacement Per Atom (DPA), gas production, nuclear heating, in the irradiation test module of the IFMIF-DONES neutron source. Most OpenMC-McDeLicious results show good agreement with MCNP6-McDeLcious within 5%. This indicates the successful benchmarking and validation of OpenMC code for the applications to accelerator-based neutron source facilities. [ABSTRACT FROM AUTHOR]

• Benchmarks of OpenMC against MCNP was conducted. • A problem has been fixed in the secondary photon transport of the OpenMC code. • Results show the suitability of OpenMC for accelerator-based applications. OpenMC is a community developed Monte Carlo (MC) code for neutron and photon transport calculations. In this work, the OpenMC code has been extended and benchmarked for accelerator-based neutron source applications, such as the IFMIF-DONES (International Fusion Material Irradiation Facility- DEMO Oriented NEutron Source) with neutron energies up to 55 MeV. A spherical computational benchmark and the TIARA high energy neutron shielding experiment has been employed for the benchmarking including also comparisons to the results of the well-validated MC code MCNP as reference. The neutron fluxes computed for spherical benchmarks of selected elements show good agreement between OpenMC and MCNP. A problem has been identified and fixed in the secondary photon transport of the OpenMC code. For the TIARA experiment on iron and concrete shielding, the results of OpenMC are in good agreement with MCNP, and the discrepancies between the experiment results and OpenMC simulated results are considered acceptable. In summary, these benchmarks provide good evidence of the suitability of OpenMC for accelerator-based neutron source applications in the energy range up to 55 MeV, with possibility of further extensions depending on the used nuclear data. [ABSTRACT FROM AUTHOR]

• The activation and shutdown dose analyses of the IFMIF-DONES. • Transport and activation calculations using McDeLicious code. • The dose rate maps in the access cell as well as the shielding assessments is presented. • The analysis of the shielding for activated target of DONES. This paper presents the activation and shutdown dose analyses of the IFMIF-DONES (International Fusion Materials Irradiation Facility – DEMO-Oriented NEutron Source) Target assembly. To this end, a series of coupled transport and activation calculations are performed using McDeLicious code, which is based on the MCNP Monte Carlo code for simulating the neutron production from d-Li reactions, and the FISPACT inventory code. The latest DONES test cell model has been employed and FENDL neutron cross-section data library has been used. Shut-down dose rate calculations were performed using the R2Smesh code system developed at KIT. The obtained dose rate maps in the access cell as well as the shielding assessments will be presented in the paper. [ABSTRACT FROM AUTHOR]

• A variance reduction approach for shutdown dose rate calculations has been proposed. • Verifications of a new shutdown dose simulation package has been carried out by comprehensive comparisons. • The shutdown dose rate in the IFMIF-DONES lithium loop cell has been assessed based on the updated design layout. Shutdown dose rate (SDR) calculations for the lithium loop cell (LLC) of the IFMIF-DONES (International Fusion Material Irradiation Facility- DEMO Oriented NEutron Source) have been performed in this work. A new version of Rigorous 2-Step code R2Smesh-3.0 was utilized, which shows improvements on efficiency, robustness, and reliability in SDR simulations. The quality of the dose map in the LLC has been improved using a weight-window mesh, combining with an intensity-based source sampling technique. The dose rate in most of the area of the LLC is below 0.5 μSv/h at one day after shutdown. Strong gamma streaming through the empty lithium pipe is a possible concern for the lithium loop maintenance. [ABSTRACT FROM AUTHOR]

IFMIF-DONES (International Fusion Materials Irradiation Facility – DEMO Oriented Neutron Source) is a fusion materials testing facility that is currently being designed under the framework of a work package of the EUROfusion Consortium. It will use a 125 mA at 40 MeV deuteron beam to generate a high neutron flux through L i (d , x n) stripping nuclear reactions in a liquid lithium target. The High Energy Beam Transport line (HEBT), the most upstream system of the IFMIF-DONES accelerator, is responsible for the guidance and shaping of the beam towards the target. Additionally, during commissioning periods, the HEBT is also responsible for diverting the beam, through the Beam Dump Transport Line, to the Beam Dump for testing purposes. The HEBT is spread along different rooms and zones: the Accelerator Vault, the Radiation Interface Zone (RIZ), and Target Interface Room (TIR). The engineering design of the HEBT components situated within the TIR and RIZ has been updated to satisfy new requirements, with a focus on ensuring the protecting of the Fast Isolation Valve (FIV) from the backscattered radiation from the target. These modifications include relocating the FIV from the TIR to the RIZ, adjusting the building layout to accommodate the new FIV module, configuring an enclosure cabinet for the RIZ, and adding local shielding to extend the lifetime of the FIV seal actuators. This work describes the current status of these TIR and RIZ engineering design, including radioprotection, commissioning and maintenance plan, beam diagnostics devices, beam dynamics and new remote handling approaches, as well as the layout and integration of the required components along the beamline. The TIR and RIZ are critical areas for IFMIF-DONES , and their design and operation must be compliant with functional, reliability and safety requirements. The updated design addresses potential issues and enhances the facility's overall functionality. • Collimator redesigned with new coolant fluid for the near TS safety measures. • TIR layout shift to two LRU frees space for new elements. • TIR-RIZ wall thickness reduced by one meter for space. • Enclosure cabinet in RIZ stores argon atmosphere for the FIV. • FIV lifespan doubled by implementing local shielding strategies. [ABSTRACT FROM AUTHOR]

The methodological approach applied for the nuclear analyses of the IFMIF-DONES facility, developed within the Early Neutron Source (ENS) project of EUROfusion, is presented. It utilizes dedicated tools, developed and adapted to the specific needs and peculiarities of an accelerator based d-Li neutron source. Major elements relate to the simulation of deuteron interactions with the Li target and the accelerator structures, the generation and transport of neutrons and photons, and the production of radio-active nuclides with the subsequent emission and transport of decay gamma radiation. With such an approach, all neutronics data can be provided which are required to design, optimize and evaluate the systems/sub-systems of the facility with regard to their nuclear and shielding performance. This is shown on the example of nuclear analyses conducted for the latest design of IFMIF-DONES. [ABSTRACT FROM AUTHOR]

• We investigated a set of dosimetry reactions for measurement of the neutron fluence in the High-Flux Test Modules of DONES. • Foil stacks irradiated with a neutron source at NPI Rez providing white neutron spectrum covering reactions of interest. • All expected induced activities could be determined by gamma spectroscopy utilizing a HPGe detector. • Further work will require to adapt the set of dosimetry reactions to the very high fluences in the HFTM.. The High Flux Test Module (HFTM) carries the specimens to be irradiated with the Early Neutron Source. The knowledge of the total neutron fluence on the specimen will be necessary for analysis. Neutron activation is a widely used method for neutron fluence measurement. We have tested a set of activation materials which seem to be suitable for application in the HFTM considering half-lives of the induced activities, the environmental conditions and the deployment time in the HFTM. Test foils were irradiated for 9.5 h with a cyclotron of NPI Řež in a white neutron field with energies up to 32 MeV. The induced activities were determined 61 days after the irradiation. We present the resulting saturation activities with estimated uncertainties and draw conclusions on the application of the selected activation materials in the HFTM. [ABSTRACT FROM AUTHOR]

A maintainable test cell (TC) concept, which targets replacing TC key components in case of damages, for the IFMIF-DONES (International Fusion Materials Irradiation Facility – Demo Oriented NEutron Source) facility is proposed to facilitate the maintenance of key containment and biological shielding components, i.e. the liner and the surrounding concrete walls. Unlike the current TC reference design which features permanent liner and concrete shielding walls, the new proposal decouples the components which suffer relative high failure possibilities from the ones which can stay as permanent construction structures. The former ones, that are expected to be replaced in case of damage, include removable sections of the liner and part of the biological shielding materials. Fundamental mechanical solution of this configuration is briefly described, and technical feasibilities are preliminarily analyzed for the aspects of independent liner enclosure structure, maintenance scenarios using remote handling systems, etc. [ABSTRACT FROM AUTHOR]

Abstract The IFMIF-DONES (International Fusion Materials Irradiation Facility-Demo Oriented NEutron Source) test cell (TC) biological shielding is responsible of providing sufficient protection for the surrounding rooms and cells from intensive neutron irradiation and gamma radiation from inside of the TC. The TC biological shielding is composed of surrounding shielding walls, two top shielding plugs, six piping and cabling plugs (PCPs), TC floor, and removable shielding materials below the TC floor. Based on the previous TC configuration, the design of the lower shielding plug has been further developed by defining the specifications of embedded helium active cooling systems with the support of neutronic simulations, CFD analysis, and remote handling requirements. The PCP design is updated to provide sufficient space for pipe and cable connections. A preliminary piping of the water cooling system inside the heavy concrete shielding walls has been performed to qualify the capability of removing volumetric nuclear heating during irradiation experiments. The geometry of TC surrounding shielding walls are adjusted according to the latest design of PCPs and LSP as well as the requirements of the active cooling pipes which are embedded in the TC surrounding walls. [ABSTRACT FROM AUTHOR]

The test cell (TC) in IFMIF-DONES (International Fusion Material Irradiation Facility – Demo Oriented NEutron Source) is the meeting area of the three major systems (test systems, lithium systems, and accelerator systems) to host the irradiation test module, lithium target assembly and the end section of the accelerator line. Although the design of the TC, to a large extent, inherits that of the reference IFMIF-EVEDA (Engineering Validation and Engineering Design Activities) TC, design justifications are required to solve the existing major open issues such as cavitation of the lithium flow, activation and maintainability of key components, and etc. In this paper, these major open issues of the reference TC layout are addressed and a TC reconfiguration proposal, featuring arranging the lithium quench tank inside the TC, is introduced. The two concepts are investigated, analyzed, and compared on the aspects of lithium flow stability, tritium generation rate, key component maintenance scenarios, irradiation shielding, and in-TC components arrangement. [ABSTRACT FROM AUTHOR]