Search

This paper proposes a comparative study on the microstructure and photocatalytic performances of titanium dioxide coatings elaborated by various thermal spraying methods (plasma spraying in atmospheric conditions, suspension plasma spraying, and high-velocity oxyfuel spraying). Agglomerated spray dried anatase TiO2 powder was used as feedstock material for spraying. Morphology and microstructural characteristics of the coatings were studied mainly by scanning electron microscopy and x-ray diffraction. The photocatalytic behavior of the TiO2-base surfaces was evaluated from the conversion rate of gaseous nitrogen oxides (NOx). It was found that the crystalline structure depended strongly on the technique of thermal spraying deposition. Moreover, a high amount of anatase was suitable for the photocatalytic degradation of the pollutants. Suspension plasma spraying has allowed retention of the original anatase phase and for very reactive TiO2 surfaces to be obtained for the removal of nitrogen oxides. [ABSTRACT FROM AUTHOR]

An artificial neural network (ANN) was built to analyze the decrease of nitrogen oxides relative to TiO2 powder photocatalytic efficiency. Experimental sets were considered to train and test ANN where it was possible to identify an optimized structure representing the correlations between experimental variables and NO and NOx efficiencies. Predicted results permitted to point out the role of exposed surface and powder mass. [Copyright &y& Elsevier]

Abstract: This paper deals with the elaboration of titanium dioxide coatings, designed for photocatalytic applications, obtained by a non-conventional method of deposition, suspension plasma spraying (SPS), an alternative of the atmospheric plasma spraying (APS) in which the material feedstock is a suspension of the material powder to be sprayed. TiO2 P25 powder (Degussa AG) mechanically dispersed in distilled water and/or ethanol was injected in argon–hydrogen and argon–hydrogen–helium plasma under atmospheric conditions. Scanning electron microscopy and X-ray diffraction were performed to study the morphology and the crystalline phases of the titania coatings. Surface features were investigated by Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS). Photocatalytic efficiency of the elaborated samples was tested in an environmental test chamber set-up and evaluated from the conversion rate of nitrogen oxides. The results showed that the coating obtained from the injection of an alcoholic suspension contained 23% of anatase ratio and ensured a very low photocatalytic decomposition of nitrogen oxides. In contrast, the injection of an aqueous suspension into the plasma permitted to obtain deposits where the anatase phase and the crystallites size were preserved. Also, a conversion rate of the pollutants of about 40%, slightly better compared to that of the initial P25 powder (around 32%) was noticed. This slightly higher efficiency was correlated with a cleaning of the particles surfaces when crossing the plasma and a higher hydroxylation of the coating surface. [Copyright &y& Elsevier]

Abstract: This paper deals with the study of the photocatalytic behaviours of TiO2 and TiO2–10wt.% Al coatings elaborated by high-velocity oxygen fuel (HVOF) spraying using spray-dried nanosized feedstock powders. In the HVOF flame, the powders were injected by two methods: internal injection, i.e. as in conventional HVOF process and external injection, i.e. outside the torch nozzle. Scanning electron microscopy and X-ray diffraction were employed to characterize the microstructure and the crystalline structure of the TiO2-based coatings. The photocatalytic activities were evaluated by the nitrogen oxides removal and compared with that of the initial powders. It was found that the amount of anatase in the coatings depends on the nature of the powder and also on the type of injection method. The TiO2 coatings, as well as, the TiO2–Al coatings elaborated using the external powder injection presented a better photocatalytic activity (the nitrogen oxides conversion rates were about 25–42% for NO and 14–18% for NO x ) than those obtained by the conventional HVOF process (<5%). Besides, TiO2 coatings containing aluminium particles had an enhanced photocatalytic activity than those of un-doped titania deposits. [Copyright &y& Elsevier]