Search

Improving the selectivity in the oxidative coupling of methane to ethane/ethylene poses a significant challenge for commercialization. The required improvements are hampered by the uncertainties associated with the reaction mechanism due to its complexity. Herein, we report about 90 % selectivity to the target products at 11 % methane conversion over Gd2O3‐based catalysts at 700 °C using N2O as the oxidant. Sophisticated kinetic studies have suggested the nature of adsorbed oxygen species and their binding strength as key parameters for undesired methane oxidation to carbon oxides. These descriptors can be controlled by a metal oxide promoter for Gd2O3. [ABSTRACT FROM AUTHOR]

The production of nitrous oxide, N2O, via NH3 oxidation is not on a practical scale due to the lack of a suitable catalyst. Instead, it is produced via thermal decomposition of NH4NO3, rendering N2O too costly and limiting its prospective uses. Herein, we report CeO2‐supported Au nanoparticles (2–3 nm) as a highly selective catalyst for low‐temperature NH3 oxidation to N2O, exhibiting two orders of magnitude higher space–time yield than the state‐of‐the‐art Mn−Bi/α‐Al2O3 and remarkable stability over 70 h on stream. The reaction proceeds via a Mars–van Krevelen mechanism, with the density of interfacial Auδ+ species and the oxygen storage capacity of CeO2 identified as the key performance descriptors. The latter could be enhanced by cobalt doping, improving the catalytic activity and setting a new benchmark for N2O productivity. These findings establish NH3 oxidation as an efficient process for N2O manufacture and facilitate its broader utilization in selective oxidations. [ABSTRACT FROM AUTHOR]

Keywords: Ammonia Oxidation; Au/CeO2; Metal-Support Interface; Nitrous Oxide; Reaction Mechanisms EN Ammonia Oxidation Au/CeO2 Metal-Support Interface Nitrous Oxide Reaction Mechanisms 1 1 1 04/27/22 20220502 NES 220502 B Ein Spiel zweier Hälften b Die direkte Oxidation von Ammoniak eröffnet einen Weg zur kostengünstigen und effizienten Produktion von Stickstoffoxid, einem vielversprechenden Reagens für selektive Oxidationsreaktionen. Rücktitelbild: Ceria-Supported Gold Nanoparticles as a Superior Catalyst for Nitrous Oxide Production via Ammonia Oxidation (Angew. Ammonia Oxidation, Au/CeO2, Metal-Support Interface, Nitrous Oxide, Reaction Mechanisms. [Extracted from the article]

Ammonia Oxidation, Au/CeO2, Metal-Support Interface, Nitrous Oxide, Reaction Mechanisms Keywords: Ammonia Oxidation; Au/CeO2; Metal-Support Interface; Nitrous Oxide; Reaction Mechanisms EN Ammonia Oxidation Au/CeO2 Metal-Support Interface Nitrous Oxide Reaction Mechanisms 1 1 1 04/27/22 20220502 NES 220502 B A game of two halves b Direct ammonia oxidation unlocks a pathway towards affordable and efficient production of nitrous oxide, a highly promising agent for selective oxidation reactions, but necessitates the development of suitable catalysts. Back Cover: Ceria-Supported Gold Nanoparticles as a Superior Catalyst for Nitrous Oxide Production via Ammonia Oxidation (Angew. [Extracted from the article]

Abstract: The mechanisms of direct N2O decomposition and N2O reduction by H2 or NH3 on RuO2 has been studied by means of steady-state catalytic tests at ambient pressure, transient experiments in a temporal analysis of products (TAP) reactor, and density functional theory (DFT) simulations. Bulk RuO2 is very active for N2O decomposition into N2 and O2, achieving full conversion at 723K. According to the DFT calculations, coordinatively unsaturated ruthenium (Rucus) sites are active for the decomposition and oxygen elimination from the surface is rate-limiting step. When pre-reducing RuO2 with H2, the de-N2O activity in the low-temperature region increases. This is attributed to the higher reactivity of surface oxygen vacancies created by H2 at bridge sites compared to Rucus sites. Co-feeding of hydrogen or ammonia with nitrous oxide strongly accelerates the rate of N2O elimination. TAP studies show that oxygen species formed upon N2O decomposition over RuO2 react with NH3 and H2 yielding N2, NO, N2O, and H2O. Both TAP experiments and DFT simulations show that the N-containing intermediates coming from ammonia adsorb much stronger on the catalyst surface than H-containing intermediates coming from hydrogen. This causes blockage of active sites for N2O decomposition by the former species, accounting for the higher efficiency of H2 as reductant for N2O. The presence of O2 in the feed cancels the reducing effect of H2 or NH3 due to the more favorable re-oxidation of reduced RuO2 by O2 compared to N2O. [Copyright &y& Elsevier]

Abstract: Mechanistic and kinetic aspects of direct N2O decomposition over BaFeAl11O19 hexaaluminate were investigated in the Temporal Analysis of Products (TAP) reactor and compared with those previously determined for Fe-MFI zeolites. The catalysts were chosen due to their de-N2O operation in significantly different temperature regimes. Several micro-kinetic models were evaluated for describing the transient responses of N2O, N2, and O2 obtained in N2O pulse experiments at 823–973K. Thorough discrimination between these models enabled us to conclude that the preferred models of N2O decomposition over BaFeAl11O19 and Fe-MFI zeolites differ in the reaction pathways leading to O2 and N2. Gas-phase N2 and O2 are simultaneously formed over BaFeAl11O19 upon interaction of gas-phase N2O with a bi-atomic surface oxygen (*–O2) species. Contrarily, the formation of O2 over Fe-MFI occurs via a sequence of three elementary heterogeneous steps and limits the overall rate of N2O decomposition. Despite the easy O2 formation, BaFeAl11O19 is less active for N2O decomposition below 973K than the Fe-MFI zeolites due to the low coverage by *–O2. According to our quantitative micro-kinetic analysis, this species is formed when gas-phase N2O reacts with a mono-atomic oxygen (*–O) species. This reaction pathway is strongly influenced by the degree of isolation of iron species. The higher the degree of iron isolation in the catalyst, the lower the de-N2O activity. [ABSTRACT FROM AUTHOR]

A temporal analysis of products (TAP) reactor was used to study relationships between the mechanism of direct N2O decomposition over metal-loaded zeolites and their resulting activity. Rh-ZSM-5 (prepared by incipient wetness) and Fe-ZSM-5 (prepared by liquid-ion exchange) were chosen as prototypic catalysts displaying low (<550 K) and high (>650 K) temperature activity, respectively. Transient studies at the same contact time revealed the higher activity of Rh-ZSM-5 below 623 K and significantly stronger N2O adsorption over Rh species than over Fe species in the zeolites. Several microkinetic models were applied for simultaneous fitting the transient responses of N2O, N2, and O2. Classical reaction schemes failed to describe the experimental data. The preferred models of N2O decomposition over Rh-ZSM-5 and Fe-ZSM-5 differ in the reaction pathways of O2 formation. For both catalysts, free active metal sites (*) and those occupied by monoatomic oxygen species (*-O) from N2O participate in the decomposition of gas-phase N2O. Gas-phase O2 is formed directly on N2O interaction with *-O over Rh-ZSM-5, whereas the latter reaction over Fe-ZSM-5 leads to a surface bi-atomic oxygen species (O-*-O), followed by its transformation to *-O2. The latter species desorbs as molecular oxygen. Comparison of ion-exchanged and steam-activated Fe-ZSM-5 [J. Phys. Chem. B 110 (2006) 22586] revealed that the reaction mechanism is independent of the iron constitution induced by the preparation and activation routes, despite important differences in catalytic activity. Our quantitative microkinetic analysis demonstrated that both the stronger reversible N2O adsorption and, most importantly, the faster desorption of O2 are distinctive mechanistic features of Rh-ZSM-5, likely indicating its high de-N2O activity. [Copyright &y& Elsevier]

Abstract: A simple cellulose-templating (CT) method was used to prepare Na–CaO catalysts for high-temperature N2O decomposition to N2 and O2 in excess of NO, O2, and H2O. According to this method, cellulose materials were soaked in aqueous solution of calcium and/or sodium nitrates followed by burning out the template material. Depending on the nature of cellulose template and calcination procedure, the obtained catalysts consisted of regularly shaped particles of 100–400nm. Conventionally prepared Na–CaO reference materials had randomly shaped particles on a micron scale. Compared to the latter catalysts, the CT ones showed higher de-N2O activity and resistance against inhibition by NO and O2, which make them interesting from industrial point of view. Transient analysis of NO interaction with the studied catalysts in the presence and the absence of O2 enabled us to conclude that the superior de-N2O performance of the CT materials is due to improved desorption of surface NO x species acting as inhibitors for N2O decomposition. [ABSTRACT FROM AUTHOR]