Search

Abstract: Infinite impulse response filters have not been used extensively in active noise and vibration control applications. The problems are mainly due to the multimodal error surface and instability of adaptive IIR filters used in such applications. Considering these, in this paper a new adaptive recursive RLS-based fast-array IIR filter for active noise and vibration control applications is proposed. At first an RLS-based adaptive IIR filter with computational complexity of order O(n 2) is derived, and a sufficient condition for its stability is proposed by applying passivity theorem on the equivalent feedback representation of this adaptive algorithm. In the second step, to reduce the computational complexity of the algorithm to the order of O(n) as well as to improve its numerical stability, a fast array implementation of this adaptive IIR filter is derived. This is accomplished by extending the existing results of fast-array implementation of adaptive FIR filters to adaptive IIR filters. Comparison of the performance of the fast-array algorithm with that of Erikson’s FuLMS and SHARF algorithms confirms that the proposed algorithm has faster convergence rate and ability to reach a lower minimum mean square error which is of great importance in active noise and vibration control applications. [Copyright &y& Elsevier]

The problem of optimizing an active noise control system for the implementation of a multi-channel ANC system with the aim of global reduction of broadband noise in a telephone kiosk is addressed in this paper. This optimization involves finding best locations for loudspeakers and microphones, and optimizing control signals. The problem of finding a proper size for control system, i.e. the number of loudspeakers and microphones involved in the control system is also investigated. The mean of acoustic potential energy in the enclosure in a frequency range of 50 Hz to 300 Hz is selected as a measure for optimization. Several genetic algorithms are proposed and compared to find the global minimum of this performance index. In order to have a better performance in reaching the global minimum, the parameters of these genetic algorithms are tuned, and the best genetic algorithm is selected among them. Numerical simulations of the acoustical potential energy and also sound pressure at the height where the head of a person may be located, confirms the optimality of the locations proposed by the genetic algorithm. Besides, the robustness of the optimized control system with respect to eventual changes in the location of primary and secondary loudspeakers and also microphones is shown with several simulations. [ABSTRACT FROM AUTHOR]

Vibration of structures due to external sound is one of the main causes of interior noise in cavities like automobile, aircraft, and rotorcraft, which disturb the comfort of passengers. Accurate modelling of such phenomena is required in eigenfrequency analysis and in designing an active noise control system to reduce the interior noise. In this paper, the effect of periodic noise travelling into a rectangular enclosure is investigated with finite element method (FEM) using COMSOL Multiphysics software. The periodic acoustic wave is generated by a point source outside the enclosure and propagated through the enclosure wall and excites an aluminium flexible panel clamped onto the enclosure. The behaviour of the transmission of sound into the cavity is investigated by computing the modal characteristics and the natural frequencies of the cavity. The simulation results are compared with previous analytical and experimental works for validation and an acceptable match between them were obtained. [ABSTRACT FROM AUTHOR]

Modal analysis for examination of the possibility of the global reduction of broadband noise in a rectangular enclosure has been studied in this paper. By developing a modal model of the acoustic environment of the enclosure the shape mode and their frequencies are obtained and on suitable bandwidth for the controller design is calculated. In order to simplify the analysis the noise sources are assumed localized and internal in one corner of the kiosk. The analysis results show that due to the existence of some degenerate modes in this application, the control action is complicated. Simulation results demonstrate how positions and number of loudspeakers and microphones will change the performance of the controller and its corresponding control effort. Based on these results and analysis a reasonable size for the controller and proper locations for sensors and actuators are proposed. Simulation results also confirm the effectiveness of the proposed system in reduction of the acoustic potential energy in the kiosk. [ABSTRACT FROM AUTHOR]

One of the main important aspects in designing an active control system is the optimization of position and number of sensors and actuators. In this paper this problem is addressed for the implementation of a multi-channel active noise control (ANC) system with the aim of global reduction of broadband noise in a telephone kiosk. This includes optimizing the locations for loudspeakers and microphones, finding proper size of the control system, i.e. the number of loudspeakers and microphones, and optimization of the control signals. The mean of acoustic potential energy in the enclosure in a frequency range of 50 Hz to 300 Hz is selected as the performance index for optimization purpose. Several genetic algorithms are proposed and compared to find the global minimum of this performance index. In order to have a better performance in reaching the global minimum, the parameters of these genetic algorithms are tuned, and the best genetic algorithm is selected among them. The main difference between the proposed algorithms is the used coding scheme. Numerical simulations of the acoustical potential energy and also sound pressure at the height where the head of a person may be located, confirms the optimality of the locations proposed by the genetic algorithm. [ABSTRACT FROM AUTHOR]