Search

Herein the morphology and exciton/charge carrier dynamics in bulk heterojunctions (BHJs) of the donor polymer PTQ10 and molecular acceptor IDIC are investigated. PTQ10:IDIC BHJs are shown to be particularly promising for low cost organic solar cells (OSCs). It is found that both PTQ10 and IDIC show remarkably high crystallinity in optimized BHJs, with GIWAXS data indicating pi‐pi stacking coherence lengths of up to 8 nm. Exciton‐exciton annihilation studies indicate long exciton diffusion lengths for both neat materials (19 nm for PTQ10 and 9.5 nm for IDIC), enabling efficient exciton separation with half lives of 1 and 3 ps, despite the high degree of phase segregation in this blend. Transient absorption data indicate exciton separation leads to the formation of two spectrally distinct species, assigned to interfacial charge transfer (CT) states and separated charges. CT state decay is correlated with the appearance of additional separate charges, indicating relatively efficient CT state dissociation, attributed to the high crystallinity of this blend. The results emphasize the potential for high material crystallinity to enhance charge separation and collection in OSCs, but also that long exciton diffusion lengths are likely to be essential for efficient exciton separation in such high crystallinity devices. [ABSTRACT FROM AUTHOR]

Abstract: Nonfullerene acceptors (NFAs) in blends with highly crystalline donor polymers have been shown to yield particularly high device voltage outputs, but typically more modest quantum yields for photocurrent generation as well as often lower fill factors (FF). In this study, we employ transient optical and optoelectronic analysis to elucidate the factors determining device photocurrent and FF in blends of the highly crystalline donor polymer PffBT4T‐2OD with the promising NFA FBR or the more widely studied fullerene acceptor PC71BM. Geminate recombination losses, as measured by ultrafast transient absorption spectroscopy, are observed to be significantly higher for PffBT4T‐2OD:FBR blends. This is assigned to the smaller LUMO‐LUMO offset of the PffBT4T‐2OD:FBR blends relative to PffBT4T‐2OD:PC71BM, resulting in the lower photocurrent generation efficiency obtained with FBR. Employing time delayed charge extraction measurements, these geminate recombination losses are observed to be field dependent, resulting in the lower FF observed with PffBT4T‐2OD:FBR devices. These data therefore provide a detailed understanding of the impact of acceptor design, and particularly acceptor energetics, on organic solar cell performance. Our study concludes with a discussion of the implications of these results for the design of NFAs in organic solar cells. [ABSTRACT FROM AUTHOR]

Here, it is investigated whether an energetic cascade between mixed and pure regions assists in suppressing recombination losses in non‐fullerene acceptor (NFA)‐based organic solar cells. The impact of polymer‐NFA blend composition upon morphology, energetics, charge carrier recombination kinetics, and photocurrent properties are studied. By changing film composition, morphological structures are varied from consisting of highly intermixed polymer‐NFA phases to consisting of both intermixed and pure phase. Cyclic voltammetry is employed to investigate the impact of blend morphology upon NFA lowest unoccupied molecular orbital (LUMO) level energetics. Transient absorption spectroscopy reveals the importance of an energetic cascade between mixed and pure phases in the electron–hole dynamics in order to well separate spatially localized electron–hole pairs. Raman spectroscopy is used to investigate the origin of energetic shift of NFA LUMO levels. It appears that the increase in NFA electron affinity in pure phases relative to mixed phases is correlated with a transition from a relatively planar backbone structure of NFA in pure, aggregated phases, to a more twisted structure in molecularly mixed phases. The studies focus on addressing whether aggregation‐dependent acceptor LUMO level energetics are a general design requirement for both fullerene and NFAs, and quantifying the magnitude, origin, and impact of such energetic shifts upon device performance. [ABSTRACT FROM AUTHOR]

Herein, a meta‐analysis of the device performance and transient spectroscopic results are undertaken for various donor:acceptor blends, employing three different donor polymers and seven different acceptors including nonfullerene acceptors (NFAs). From this analysis, it is found that the primary determinant of device external quantum efficiency (EQE) is the energy offset driving interfacial charge separation, ΔECS. For devices employing the donor polymer PffBT4T blended with NFA and fullerene acceptors, an energy offset ΔECS = 0.30 eV is required to achieve near unity charge separation, which increases for blends with PBDTTT‐EFT and P3HT to 0.36 and ≈1.2 eV, respectively. For blends with PffBT4T and PBDTTT‐EFT, a 100 meV decrease in the LUMO of the acceptor is observed to result in an approximately twofold increase in EQE. Steady state and transient optical data determine that this energy offset requirement is not associated with the need to overcome the polymer exciton binding energy and thereby drive exciton separation, with all blends studied showing efficient exciton separation. Rather, the increase in EQE with larger energy offset is shown to result from suppression of geminate recombination losses. These results are discussed in terms of their implications for the design of donor/NFA interfaces in organic solar cells, and strategies to achieve further advances in device performance. The primary factor limiting the efficiency of photocurrent generation is identified in polymer:nonfullerene acceptor (NFA) blends and its implications for materials design in the optimisation of organic solar cell performance is discussed. The magnitude of this geminate recombination loss pathway is found to be the key determinant of the efficiency of photocurrent generation in polymer:NFA blend solar cells. [ABSTRACT FROM AUTHOR]