Search

Piecewise behavioral models are commonly adopted for modeling and linearization of RF power amplifiers (PAs) that exhibit strong amplitude-dependent nonlinear distortion characteristics, as global polynomial approximations tend to underperform in such scenarios. In this article, we consider a new piecewise model for PAs based on the mixture of experts (ME) approach, which builds on a probabilistic model that allows the different submodels to cooperate—as opposed to operating in an independent fashion that is commonly the case in existing reference methods. We first introduce the ME framework theory while also extend it such that it can be applied to model complex baseband signals and nonlinearities. Then, we show how the ME model allows overcoming some of the intrinsic shortcomings that existing piecewise behavioral models commonly exhibit, which translates into improved modeling accuracy and improved linearization performance. Furthermore, the extension of the ME approach to a tree-structured regression model, referred to as the hierarchical ME model, is also introduced and shown to provide further performance improvements over the basic ME approach. The proposed solutions are validated with extensive RF measurements, covering both PA direct modeling and digital predistortion (DPD)-based linearization, on a gallium nitride (GaN) load-modulated balanced PA, on a GaN Doherty PA, and on a class AB GaN high electron mobility transistor PA, while being compared against several state-of-the-art piecewise methods. The results demonstrate that the ME framework-based models outperform the state of the art. [ABSTRACT FROM AUTHOR]

In this article, we study digital predistortion (DPD)-based linearization with a specific focus on millimeter-wave (mmW) active antenna arrays. Due to the very large-channel bandwidths and beam-dependence of nonlinear distortion in such systems, we present a closed-loop DPD learning architecture, lookup table (LUT)-based memory DPD models, and low-complexity sign-based estimation algorithms such that even continuous DPD learning could be technically feasible. To this end, three different learning algorithms—sign, signed regressor, and sign–sign—are formulated for the LUT-based DPD models such that the potential rank deficiencies, experienced in earlier methods, are avoided while facilitating greatly reduced learning complexity. The injection-based LUT DPD structure is also shown to allow for low numbers and reduced dynamic range of the involved LUT entries. Extensive RF measurements utilizing a state-of-the-art mmW active antenna array system at 28 GHz are carried out and reported to validate the methods, incorporating very wide channel bandwidths of 400 and 800 MHz while pushing the array close to saturation. In addition, the processing and learning complexities of the considered techniques are analyzed, which, together with the measured linearization performance figures, allows to assess the complexity–performance tradeoffs of the proposed solutions. Overall, the results show that efficient mmW array linearization can be obtained through the proposed methods at very low complexity. [ABSTRACT FROM AUTHOR]

In this letter, we propose an efficient solution to linearize mmWave active antenna array transmitters that suffer from beam-dependent load modulation. We consider a dense neural network that is capable of modeling the correlation between the nonlinear distortion characteristics among different beams. This allows providing consistently good linearization regardless of the beamforming direction, thus avoiding the necessity of executing continuous digital predistortion parameter learning. The proposed solution is validated, conforming to 5G new radio transmit signal quality requirements, with extensive over-the-air RF measurements utilizing a state-of-the-art 64-element active antenna array operating at 28-GHz carrier frequency. [ABSTRACT FROM AUTHOR]

This paper investigates digital predistortion (DPD) linearization of hybrid beamforming large-scale antenna transmitters. We propose a novel DPD processing and learning technique for an antenna subarray, which utilizes a combined signal of the individual power amplifier (PA) outputs in conjunction with a decorrelation-based learning rule. In effect, the proposed approach results in minimizing the nonlinear distortions in the direction of the intended receiver. This feature is highly desirable, since emissions in other directions are naturally weak due to beamforming. The proposed parameter learning technique requires only a single observation receiver, and therefore supports simple hardware implementation. It is also shown to clearly outperform the current state-of-the-art technique that utilizes only a single PA for learning. Analysis of the feedback network amplitude and phase imbalances reveals that the technique is robust even to high levels of such imbalances. Finally, we also show that the array system out-of-band emissions are well-behaving in all spatial directions, and essentially below those of the corresponding single-antenna transmitter, due to the combined effects of the DPD and beamforming. [ABSTRACT FROM AUTHOR]

This paper proposes an active radio frequency (RF) cancellation solution to suppress the transmitter (TX) passband leakage signal in radio transceivers supporting simultaneous transmission and reception. The proposed technique is based on creating an opposite-phase baseband equivalent replica of the TX leakage signal in the transceiver digital front-end through adaptive nonlinear filtering of the known transmit data, to facilitate highly accurate cancellation under a nonlinear power amplifier (PA). The active RF cancellation is then accomplished by employing an auxiliary TX chain to generate the actual RF cancellation signal, and combining it with the received signal at the receiver (RX) low-noise amplifier (LNA) input. A closed-loop parameter learning approach, based on the decorrelation learning rule, is also developed to efficiently estimate the coefficients of the nonlinear cancellation filter in the presence of a nonlinear PA with memory, finite passive isolation, and a nonlinear LNA. The performance of the proposed cancellation technique is evaluated through comprehensive RF measurements adopting commercial LTE-Advanced transceiver hardware components. The results show that the proposed technique can provide an additional suppression of up to 54 dB for the TX passband leakage signal at the LNA input, even at very high transmit power levels and with wide transmission bandwidths. Such a novel cancellation solution can, therefore, substantially improve the TX–RX isolation, hence reducing the requirements on passive isolation and RF component linearity, as well as increasing the efficiency and flexibility of the RF spectrum use in the emerging 5G radio networks. [ABSTRACT FROM PUBLISHER]

In this paper, a novel decorrelation-based concurrent digital predistortion (DPD) solution is proposed for dual-band transmitters (TXs) employing a single wideband power amplifier (PA), and utilizing only a single feedback receiver path. The proposed decorrelation-based parameter learning solution is both flexible and simple, and operates in a closed-loop manner, opposed to the widely applied indirect learning architecture. The proposed decorrelation-based learning and DPD processing can also be effectively applied to more ordinary single carrier/band transmissions, as well as generalized to more than two transmit bands. Through a comprehensive analysis covering both the DPD parameter learning and the main path processing, it is shown that the complexity of the proposed concurrent DPD is substantially lower compared with the other state-of-the-art concurrent DPD methods. Extensive set of simulation and RF measurement results are also presented, using base-station PAs as well as a commercial LTE-Advanced mobile PA, to evaluate and validate the effectiveness of the proposed DPD solution in various real world scenarios, incorporating both single-band and dual-band TX cases. The simulation and RF measurement results demonstrate excellent linearization performance of the proposed concurrent DPD, even outperforming current state-of-the-art methods, despite the significantly lower complexity. [ABSTRACT FROM AUTHOR]

Noncontiguous transmission schemes combined with high power-efficiency requirements pose big challenges for radio transmitter and power amplifier (PA) design and implementation. Due to the nonlinear nature of the PA, severe unwanted emissions can occur, which can potentially interfere with neighboring channel signals or even desensitize the own receiver in frequency division duplexing transceivers. In this paper, to suppress such unwanted emissions, a low-complexity subband digital predistortion solution, specifically tailored for spectrally noncontiguous transmission schemes in low-cost devices, is proposed. The proposed technique aims at mitigating only the selected spurious intermodulation distortion components at the PA output, hence allowing for substantially reduced processing complexity compared with classical linearization solutions. Furthermore, novel decorrelation-based parameter learning solutions are also proposed and formulated, which offer reduced computing complexity in parameter estimation as well as the ability to track time-varying features adaptively. Comprehensive simulation and RF measurement results are provided, using a commercial LTE-Advanced mobile PA, to evaluate and validate the effectiveness of the proposed solution in real-world scenarios. The obtained results demonstrate that highly efficient spurious component suppression can be obtained using the proposed solutions. [ABSTRACT FROM PUBLISHER]

Carrier aggregation transmissions in frequency division duplexing devices reduce the duplexing distance between the transmitter (TX) and receiver (RX) bands. As a consequence, the spurious intermodulation distortion products created by the nonlinear RF front-end of the TX may easily extend over to the RX band, potentially causing own RX desensitization. In this paper, we propose an efficient and computationally feasible adaptive digital identification and cancellation technique to mitigate the RX desensitization. We first show that the spurious leakage signal at own RX band depends on an equivalent leakage channel that models the overall signal leakage path including the TX nonlinearities, duplexer filter responses, and RX path. The parameters of the equivalent leakage channel can be efficiently estimated with the least squares or the recursive least squares algorithm, using the actual digital transmit data as a reference, and then used to regenerate and cancel the leakage interference from the received signal. The performance of the proposed technique is evaluated with extensive computer simulations, as well as with practical real-world RF measurements, demonstrating excellent calibration properties with up to 19-dB improvement in singal-to-interference plus noise ratio of the desired received signal. [ABSTRACT FROM PUBLISHER]

Despite the intensive recent research on wireless single-channel full-duplex communications, relatively little is known about the transceiver chain nonidealities of full-duplex devices. In this paper, the effect of nonlinear distortion occurring in the transmitter power amplifier (PA) and the receiver chain is analyzed, beside the dynamic range requirements of analog-to-digital converters (ADCs). This is done with detailed system calculations, which combine the properties of the individual electronics components to jointly model the complete transceiver chain, including self-interference cancellation. They also quantify the decrease in the dynamic range for the signal of interest caused by self-interference at the analog-to-digital interface. Using these system calculations, we provide comprehensive numerical results for typical transceiver parameters. The analytical results are also confirmed with full waveform simulations. We observe that the nonlinear distortion produced by the transmitter PA is a significant issue in a full-duplex transceiver and, when using cheaper and less linear components, also the receiver chain nonlinearities become considerable. It is also shown that, with digitally intensive self-interference cancellation, the quantization noise of the ADCs is another significant problem. [ABSTRACT FROM PUBLISHER]

One of the main trends in the evolution of radio receivers and other wireless device is to implement more and more of the receiver functionalities using digital signal processing (DSP). However, due to practical limitations in the analog-to-digital conversion process, some analog signal processing stages are likely to remain also in the continuation. With the ever-increasing demands for the system performance and supported data rates on one side, and the terminal flexibility and implementation costs on the other, the requirements for these remaining analog front-end stages become extremely challenging to meet. Then, one interesting idea in this context is to apply sophisticated DSP-based techniques to compensate for some of the most fundamental nonidealities of the receiver analog front-ends. In this paper, we focus on developing and demonstrating novel digital techniques to mitigate the effects of harmonic and intermodulation distortion in wideband multicarrier or multichannel receivers using adaptive interference cancellation. The approach in general is practically oriented and largely based on analyzing and processing measured real-world receiver front-end signals. The obtained results indicate that the proposed compensation technique can be used to suppress nonlinear distortion due to receiver front-end sections under realistic signaling assumptions [ABSTRACT FROM PUBLISHER]