Search

This paper reports nonlinear optical response studies of thin layers using graphene oxide (GO) and their performance for detecting water content in transformer oil using three sets of approaches. The sensor performance is evaluated based on bare optical fibre, D-shape optical fibre integrated with GO and the effects of the covering device with polydimethylsiloxane (PDMS). The improvement of this study is to ensure the stability of the recorded signal. The nonlinear optical response of the prepared dispersion was explored using the Z-scan technique with an 800 nm continuous wave laser beam. Taking advantage of the graphene-induced evanescent field using D-shape optical fibre with PDMS covers on the device can give high sensitivity and good stability for water dissolved in the oil at 1550 nm. We measured fluctuations in transmitted light associated with varying water contents ranging from 16 to 38 ppm. [ABSTRACT FROM AUTHOR]

The optical carrier generation is the basic building block to implement all-optical orthogonal frequency-division multiplexing (OFDM) transmission. One method to optically generate single and multicarriers is to use the microring resonator (MRR). The MRRs can be used as filter devices, where generation of high-frequency (GHz) soliton signals as single and multicarriers can be performed using suitable system parameters. Here, the optical soliton in a nonlinear fiber MRR system is analyzed, using a modified add/drop system known as a Panda ring resonator connected to an add/drop system. In order to set up a transmission system, i.e., IEEE802.11a, first, 64 uniform optical carriers were generated and separated by a splitter and modulated; afterward, the spectra of the modulated optical subcarriers are overlapped, which results one optical OFDM channel band. The quadrature amplitude modulation (QAM) and 16-QAM are used for modulating the subcarriers. The generated OFDM signal is multiplexed with a single-carrier soliton and transmitted through the single-mode fiber (SMF). After photodetection, the radio frequency (RF) signal was propagated. On the receiver side, the RF signal was optically modulated and processed. The results show the generation of 64 multicarriers evenly spaced in the range from 54.09 to 55.01 GHz, where demodulation of these signals is performed, and the performance of the system is analyzed. [ABSTRACT FROM PUBLISHER]

A system of microring resonators (MRRs) connected to an optical modified add/drop filter system known as a Panda ring resonator is presented. The optical soliton pulse of 60 GHz frequency band can be generated and used for Wireless Personal Area Network (WPAN) applications such as IEEE 802.15.3c. The system uses chaotic signals generated by a Gaussian laser pulse propagating within a nonlinear MRRs system. The chaotic signals can be generated via a series of microring resonators, where the filtering process is performed via the Panda ring resonator system wherein ultrashort single and multiple optical soliton pulses of 60 GHz are generated and seen at the through and drop ports, respectively. The IEEE 802.15.3c standard operates at the 60 GHz frequency band, and it is applicable for a short distance optical communication such as indoor systems, where the higher transmission data rate can be performed using a high frequency band of the output optical soliton pulses. The single and multi-soliton pulses could be generated and converted to logic codes, where the bandwidths of these pulses are 5 and 20 MHz, respectively. Thus, these types of signals can be used in optical indoor systems and transmission link using appropriate components such as transmitter, fiber optics, amplifier, and receiver. [ABSTRACT FROM PUBLISHER]

Photon squeezing and self-pumping within a nonlinear microring GaAsInP/P resonator are modeled and simulated, based on practical, published device parameters. A slowly varying amplitude pulse is input to the system, with a pulse width of 20 ns, a wavelength of 1.55 µm and peak power of 100 mW. The nonlinear effect resulting from the photons within the nonlinear ring resonator can be increased by adding external nonlinear coupling where, in this case, two nonlinear side rings are provided. The Dirac approach is used to generate the squeezed photons within the system. Three different device structures have been investigated, which include an add-drop filter, and a modified add-drop filter with two inner and outer side ring coupling resonators, where the nonlinear four-wave mixing effect is introduced. By using the commercial Opti-wave and MATLAB programs (in which suitable parameters have been chosen), the balance between the creation and annihilation operators can form the squeezed photons, which can be seen at the edge and center rings. The results obtained have shown that the squeezed center photon optical path (between 0 and 1 nm can be obtained) can be useful for interferometry, photon sources, and security code and sensor applications. [ABSTRACT FROM AUTHOR]