Search

This study investigates an improvement in memory characteristics through depositing an In2O3 layer as an oxygen ion reservoir in the switching layer (SL) of resistive random access memory (RRAM). The deposition of In2O3, denoted as Pt/HfO2/In2O3/TiN device, provides better memory characteristics including lower forming voltage (VF), set/reset voltage (VSET/VRESET), larger memory window, and higher resistances with higher uniformity at low resistance state (LRS) and high resistance state (HRS), compared to the devices without the In2O3 deposition, denoted as Pt/HfO2/TiN device. The conduction mechanisms, verified through fitting current–voltage (I - V) curves, are consistent with the results of a varied temperature I - V experiment. Finally, a physical model is proposed to explain our observations. [ABSTRACT FROM AUTHOR]

A technique was proposed to concentrate the distribution of set voltages. After a plasma treatment, the stability of the high-resistive state (HRS) increased, and the distribution of set voltages was more concentrated at 0.8 V, with a sufficient HRS/LRS resistive ratio (∼100x). In addition, the surface of the TiN electrode became rougher, causing oxygen to enter the TiN electrode and form a TiON layer, which acts as an oxygen reservoir. The reservoir is confirmed and the conduction model is supported by both electrical and material analyses. We propose that the observed improvement is due to the difference in the TiN electrode surface. Image 1 • Applied the plasma treatment on electrode to stabilize set voltage. • Construct the physical model to explain abnormal current conduction. • Complete electrical and material analysis were performed in this work. [ABSTRACT FROM AUTHOR]

This study proposes the design of conductive bridge random access memory (CBRAM) using an indium electrode, which diffuses into hafnium oxide. The device is found to exhibit good operating characteristics, maintaining a large operation window, low set and reset voltages, and advantageous operation speed, thereby reducing operating power consumption. Electrical experiments, transmission electron microscopy, and energy‐dispersive spectroscopy confirm that the device exhibits the characteristics of a CBRAM device. In addition, due to the large operation window of this In electrode device, a combination of two of these CBRAM can act as a complementary resistive switching (CRS) device with a large memory window. [ABSTRACT FROM AUTHOR]