Search

Since the first plasma realized in 2020, a series of key systems on HL-3 (known as HL-2M before) tokamak have been equipped/upgraded, including in-vessel components (the first wall, lower divertor, and toroidal cryogenic/water-cooling/baking/glow discharge systems, etc.), auxiliary heating system of 11 MW, and 28 diagnostic systems (to measure the plasma density electron temperature, radiation, magnetic field, etc.). Magnet field systems were commissioned firstly for divertor plasma discharges. During the 2nd experimental campaign of HL-3 tokamak, several great progresses have been achieved. Firstly, the successful operation with plasma current larger than 1 MA was achieved under a divertor configuration. Secondly, the advanced divertor concept with two distinct snowflake configurations was realized. It is found that the distribution of ion saturation current and heat flux on bottom plate becomes wide due to magnetic surface expansion, demonstrating the advantage of such configuration in the heat flux mitigation. In addition, using the combination of NBI, ECRH and LHCD, the standard sawtoothing high confinement mode of megampere plasma was firstly accessed on the HL-3. The successful commissioning of HL-3 is beneficial for the initial operation of ITER.

The mission of HL-2A is to explore the key physical topics relevant to ITER and to the advanced tokamak operation (e.g. the operation of future HL-2M), such as the access of H-mode, energetic particle physics, edge-localized mode (ELM) mitigation/suppression and disruption mitigation. Since the 2016 Fusion Energy Conference, the HL-2A team has focused on the investigations on the following areas: (i) pedestal dynamics and L-H transition, (ii) techniques of ELM control, (iii) turbulence and transport, (iv) energetic particle physics. The HL-2A results demonstrated that the increase of mean shear flow plays a key role in triggering L-I and I-H transitions, while the change of flow is mainly induced by the ion pressure gradient. Both mitigation and suppression of ELMs were realized by laser blow-off seeded impurity (Al, Fe, W). The 30% Ne mixture supersonic molecular beam injection seeding also robustly induced ELM mitigation. The ELMs were mitigated by low-hybrid current drive. The stabilization of m/n = 1/1 ion fishbone activities by electron cyclotron resonance heating was found on the HL-2A. A new m/n = 2/1 ion fishbone activity was observed recently, and the modelling indicated that passing fast ions dominantly contribute to the driving of 2/1 fishbone. The non-linear coupling between the toroidal Alfven eigenmode and tearing mode (TM) led to the generation of a high frequency mode with the toroidal mode number n = 0. The turbulence was modulated by TM when the island width exceeds a threshold and the modulation is localized merely in the inner area of the islands. Meanwhile, turbulence radial spread took place across the island region.

Transitions between low (L-mode) and intermediate (I-phase) confinement regimes triggered by sawteeth are investigated using multiple Langmuir probe arrays in the edge plasmas of the HL-2A tokamak. The I-phase is characterized by limit-cycle oscillations (LCOs). Repeated L-I-L transitions induced by sawtooth heat pulses are also observed. Statistical analyses show that the delay time of the L-I transition relative to sawtooth crashes is less than ∼1 ms. The intensity of turbulence bursts in the I-phase is stronger than those observed in L-mode plasmas. Measurements are consistent with zonal flow reducing turbulence intensity in the frequency band ∼20-100 kHz, while the LCO turbulence of frequency higher than 100 kHz has more power than that in the L-mode. The analyses of time-resolved power transfers between turbulence and zonal flows suggest that power transfers exist between turbulence and zonal flows. The direction of the power transfers is from turbulence into geodesic acoustic modes in ohmic plasmas. © 2013 IAEA, Vienna.

For the first time supersonic molecular beam injection (SMBI) and cluster jet injection (CJI) were applied to mitigate edge-localized modes (ELMs) in HL-2A successfully. The ELM frequency increased by a factor of 2-3 and the heat flux on the divertor target plates decreased by 50% on average after SMBI or CJI. Energetic particle induced modes were observed in different frequency ranges with high-power electron cyclotron resonance heating (ECRH). The high frequency (200-350 kHz) of the modes with a relatively small amplitude was close to the gap frequency of the toroidicity-induced Alfvén eigenmode. The coexistent multi-mode magnetic structures in the high-temperature and low-collision plasma could affect the plasma transport dramatically. Long-lived saturated ideal magnetohydrodynamic instabilities during strong neutral beam injection heating could be suppressed by high-power ECRH. The absolute rate of nonlinear energy transfer between turbulence and zonal flows was measured and the secondary mode competition between low-frequency (LF) zonal flows (ZFs) and geodesic acoustic modes (GAMs) was identified, which demonstrated that ZFs played an important role in the L-H transition. The spontaneously generated E × B shear flow was identified to be responsible for the generation of a large-scale coherent structure (LSCS), which provided unambiguous experimental evidence for the LSCS generation mechanism. New meso-scale electric potential fluctuations (MSEFs) at frequency f ∼ 10.5 kHz with two components of n = 0 and m/n = 6/2 were also identified in the edge plasmas for the first time. The MSEFs coexisted and interacted with magnetic islands of m/n = 6/2, turbulence and LF ZFs. © 2013 IAEA, Vienna.

The radial structures of multiple sheared flow populations and fluctuations are simultaneously measured using combinations of Langmuir probe arrays in the edge plasmas of the HL-2A tokamak with ohmic and electron cyclotron resonance heating (ECRH). The maximum of geodesic acoustic mode (GAM) amplitude locates at ∼2-3 cm inside the last close flux surface (LCFS). The low-frequency zonal flow (LFZF) and GAM tend to coexist in the inner region. The dependences of the amplitudes of the multiple sheared flows and turbulence on ECRH heating power are also investigated. The measured turbulent Reynolds stresses are shown to be strongly correlated with the sheared flows, as predicted by theory. The turbulence is modulated at the each frequency of the multiple sheared flows simultaneously, and the particle fluxes induced by the turbulence are significantly reduced near the LCFS and in the GAM peaking region. The analyses also show that the spatial structures of the turbulent envelopes at the LFZF and GAM frequencies are similar to those observed in LFZF and GAM. © 2013 IAEA, Vienna.

Abstract Density profiles in the pedestal region (H-mode) are measured in HL-2A and the characteristics of the density pedestal are described. Cold particle deposition by supersonic molecular beam injection (SMBI) within the pedestal is verified. Edge-localized mode (ELM) mitigation by SMBI into the H-mode pedestal is demonstrated and the relevant physics is elucidated. The sensitivity of the effect to SMBI pressure and duration is studied. Following SMBI, the ELM frequency increases and the ELM amplitude decreases for a finite duration. Increases in ELM frequency of are achieved. This experiment argues that the ELM mitigation results from an increase in higher frequency fluctuations and transport events in the pedestal, which are caused by SMBI. These inhibit the occurrence of large transport events which span the entire pedestal width. The observed change in the density pedestal profiles and edge particle flux spectrum with and without SMBI supports this interpretation. An analysis of the experiment and a model shows that ELMs can be mitigated by SMBI with shallow particle penetration into the pedestal.