Search

The survivability of the domestic nuclear power industry depends on the cost-competitiveness of safe and secure nuclear power generation. Advanced reactor design concepts aim to have increased safety margins over traditional large light water reactors (LWRs). With increased safety margins comes the potential for a corresponding decrease in off-site risk to the general public from a hypothetical release of radioactivity due to sabotage or theft. Without sacrificing safety or security, advanced reactor designers may be able to achieve operational cost improvements over current LWRs in part by designing less burdensome physical protection systems (PPSs) and by replacing on-site response forces with off-site response forces. To accommodate these developments, the U.S. Nuclear Regulatory Commission is drafting new rulemakings for physical security when licensing through the current frameworks in 10 CFR 50 or 10 CFR 52 along with drafting an entirely new licensing framework: 10 CFR 53. A novel technology-inclusive consequence-informed methodology for the selection of the optimal licensing path for the design of PPSs at advanced fixed-site commercial nuclear power facilities is presented herein. This methodology proposes integrating security considerations at the beginning of a reactor facility design effort to streamline the licensing process. Off-site total effective dose equivalents at the exclusion area and low population zone boundaries were identified as the key metrics when determining a design's most appropriate licensing path that in turn affects the design requirements placed upon the PPS. Given these metrics, source-term generation of potential adversary-induced physics-based sabotage actions utilizing severe accident modeling software and off-site plume dispersal modeling were identified as appropriate for determining siting constraints, potential target sets for hypothetical sabotage events, and their subsequent off-site dose consequences. The methodology proposes using the consequence results from the sabotage modeling, in combination with desired cost-saving PPS characteristics, to help inform the licensing path selection. Once a licensing path is chosen, the methodology utilizes the Design and Evaluation Process Outline to evaluate an effective PPS following the licensing requirements placed on the facility. This paper also presents examples of hypothetical commercial nuclear power facilities with varying consequence levels and demonstrations of how to select the optimal licensing pathways for each. [ABSTRACT FROM AUTHOR]

Local knowledge is recognised as a critical element of global energy transition and energy justice. This paper explores the roles local knowledge in the formation of a community organisation responsible for monitoring the nuclear facility operations, governance, and public risk communication. Our case study examines a local nuclear oversight organisation in the Kashiwazaki-Kariwa region in Japan, where suggestions have been made to consider nation-wide institutionalisation of organisations similar to French Commissions Locales d'Information (Local Information Commissions). Our findings reveal the critical roles of three forms of local knowledge, with a particular emphasis on the nuanced yet crucial impact of everyday-life knowledge (seikatsu-chi), a facet not extensively explored in existing studies, in facilitating the establishment of the local organisation. [ABSTRACT FROM AUTHOR]

As nuclear technology evolves in response to increased demand for diversification and decarbonization of the energy sector, new and innovative approaches are needed to effectively identify and deter the proliferation of nuclear arms, while ensuring safe development of global nuclear energy resources. Preventing the use of nuclear material and technology for unsanctioned development of nuclear weapons has been a long-standing challenge for the International Atomic Energy Agency and signatories of the Treaty on the Non-Proliferation of Nuclear Weapons. Environmental swipe sampling has proven to be an effective technique for characterizing clandestine proliferation activities within and around known locations of nuclear facilities and sites. However, limited tools and techniques exist for detecting nuclear proliferation in unknown locations beyond the boundaries of declared nuclear fuel cycle facilities, representing a critical gap in non-proliferation safeguards. Microbiomes, defined as "characteristic communities of microorganisms" found in specific habitats with distinct physical and chemical properties, can provide valuable information about the conditions and activities occurring in the surrounding environment. Microorganisms are known to inhabit radionuclide-contaminated sites, spent nuclear fuel storage pools, and cooling systems of water-cooled nuclear reactors, where they can cause radionuclide migration and corrosion of critical structures. Microbial transformation of radionuclides is a well-established process that has been documented in numerous field and laboratory studies. These studies helped to identify key bacterial taxa and microbially-mediated processes that directly and indirectly control the transformation, mobility, and fate of radionuclides in the environment. Expanding on this work, other studies have used microbial genomics integrated with machine learning models to successfully monitor and predict the occurrence of heavy metals, radionuclides, and other process wastes in the environment, indicating the potential role of nuclear activities in shaping microbial community structure and function. Results of this previous body of work suggest fundamental geochemical-microbial interactions occurring at nuclear fuel cycle facilities could give rise to microbiomes that are characteristic of nuclear activities. These microbiomes could provide valuable information for monitoring nuclear fuel cycle facilities, planning environmental sampling campaigns, and developing biosensor technology for the detection of undisclosed fuel cycle activities and proliferation concerns. [ABSTRACT FROM AUTHOR]

The performance of an atomic facility depends on the efficient supply of electricity, particularly emergency loads like monitoring and control equipment, radiation safety systems, and emergency lights. Most nuclear facilities rely on diesel generators to supply emergency loads during grid outages. Due to the diesel generator's imperfections, such as its starting time, it may fail to deliver power because it is unavailable due to maintenance, failure to start, or failure to run and supply the load. It cannot immediately supply the critical loads, resulting in a blackout and the release of radioactive substances into the environment. To address the previous issues, this paper proposes an improved method to enhance the reliability of nuclear facilities for providing electricity to safety and critical consumers during normal and emergency operating modes. The approach incorporates a photovoltaic (PV) system/battery, and its robustness and performance are tested using load flow and transient stability analysis. The simulation results demonstrated the effectiveness and speed of the proposed method when compared to the traditional method, as the emergency consumers were successfully powered within a very short time without fluctuations, and the voltage reduction and frequency were within the nominal values. The electrical transient analyzer program (ETAP) is used to validate these results. [ABSTRACT FROM AUTHOR]

The mission of Atomic Energy Regulatory Board (AERB) of India is to ensure that the use of ionising radiation and nuclear energy in India does not cause unacceptable impact on the workers, members of the public and to the environment. AERB has the mandate to carry out detailed safety review for the siting, construction, commissioning, operation and decommissioning of nuclear and radiation facilities established within the country. To deliver and maintain a strong, credible and technically sound regulation, AERB has established the Safety Research Institute (SRI) at Kalpakkam with a robust technical infrastructure and wide knowledge base. This paper highlights the independent safety research activities carried out at SRI and its role to support and facilitate the decision-making process by AERB at various stages of regulatory review for ensuring safety of the nuclear facilities in India. [ABSTRACT FROM AUTHOR]

To provide energy security and head off further increases in global temperatures, an aggressive transition from fossil fuels to other types of energy implies the need to possibly construct hundreds of nuclear power plants in the near future. However, the real and perceived risks of nuclear energy remain a significant impediment to that transition. This paper describes a comprehensive work process that combines the rigor of model‐based systems engineering (MBSE) with 1) the Idaho National Laboratory's (INL) decades of experience with small reactors and with 2) modern project delivery processes. The objective is to reduce the risks of building new facilities or converting existing facilities to nuclear power generation. [ABSTRACT FROM AUTHOR]

Dounreay Nuclear Power Development Establishment (NPDE) was built in the far north-east of Scotland due to the possible 'misbehaviour' of the technology and the dangerous nature of the materials involved. From 1960 to the eve of decommissioning in 2007, despite numerous health and safety issues across the Dounreay nuclear facility, a visitor centre operated there. Initially, its purpose was to satisfy public curiosity and provide information about the atomic work being undertaken. From the 1970s, however, the objective of the Dounreay visitor centre shifted, to focus on overcoming public objections to nuclear power. Archive material made available by the Nuclear Decommissioning Authority (NDA) was analysed according to themes addressed in the literature review. Findings reveal an ideological narrative curated by the UK Atomic Energy Authority (UKAEA) and presented to the public via exhibitions, brochures, hands-on displays and outreach activities. At the visitor centre, Dounreay and its associated technologies were simplified, 'banalized', via a narrative that sought to frame an inhospitable destination (Dounreay) as a safe, welcoming and hospitable place to visit. [ABSTRACT FROM AUTHOR]

Currently, over 100 nuclear power units globally have been in operation for more than 40 years. Hindered by the limitations of computer technology at the time, these nuclear facilities lack detailed electronic drawings. Activities such as equipment replacement and process circuit system modifications during operation result in discrepancies between paper drawings and actual conditions. Given the complexity and irreversibility of nuclear facility decommissioning activities, virtual simulation technology is often employed before the decommissioning process begins to assist in designing and validating decommissioning plans. Consequently, the creation of high-precision 3D models is crucial for subsequent decommissioning designs. Through innovatively utilizing laser-scanning 3D model reconstruction technology in the reconstruction of the model of China's first heavy water research reactor undergoing decommissioning, this paper provides an overview of the process of laser-scanning 3D model reconstruction and its application in reconstructing the heavy water research reactor model. Using a 3D laser scanner, four decommissioning areas of the heavy water research reactor, including the reactor building, secondary water pump room, ventilation center, and low-level radioactive wastewater storage tank area, were subjected to 3D laser scanning. The acquired point cloud data from 572 scanning stations were processed using point cloud processing software for denoising, stitching, and triangulation. The triangulated model was then imported into modeling software for 3D reconstruction, ultimately establishing a digitalized model of the heavy water research reactor suitable for subsequent decommissioning simulation and design. [ABSTRACT FROM AUTHOR]

Nuclear power plants require cooling water. When numerous nuclear plants were built in the 1970s, they were thus placed at major rivers. This caused cross-border problems, since in Europe, many rivers crossed or constituted borders. As awareness for thermal and radioactive pollution grew, border areas became hotbeds of European anti-nuclear protest. Advocates of European integration suggested that the European Communities (EC) were best positioned to resolve this issue. This article analyses the EC rulemaking attempts regarding the siting of nuclear power plants and explains why they failed. It argues that while the cross-border nature of the problem of nuclear installations at borders justified EC-level legal solutions, the geography of nuclear plants militated against supranational solutions -- at a time of national vetoes and when energy security was considered a national sovereignty concern. The article is based on the analysis of primary sources from European Union and national archives. By taking the physical and political geography of nuclear energy into account, this article offers new perspectives on the role of borders and border studies, on the history of nuclear energy and society, and on the history of European integration. [ABSTRACT FROM AUTHOR]

Policy makers around the world have been advocating for an expansion of nuclear energy as a way to mitigate climate change, putting in place financial and political incentives for building new reactors and associated facilities. At the same time, policy makers have also been emphasizing the importance of incorporating justice considerations while decarbonizing. The two are not compatible because of the environmental injustices inflicted by the chain of processes required to generate electricity at nuclear power plants. These injustices are a result of the radioactive nature of the waste materials produced at each step of the nuclear fuel chain. Some of these materials remain hazardous for tens of thousands of years. In addition, nuclear facilities face the ever present risk of catastrophic accidents which can contaminate large tracts of land, rendering them uninhabitable for decades if not centuries. These consequences disproportionately fall on Indigenous Peoples and other disempowered communities, as well as non‐human entities. Such impacts are overlooked in our current socio‐political system committed to growth and a techno‐economic approach to dealing with any challenges to its continued existence. This article is categorized under:Human and Social Dimensions > Energy and Climate JusticeEnergy and Power Systems > Energy Infrastructure [ABSTRACT FROM AUTHOR]