Search

Achieving a higher magnetic field is important for solid-state nuclear magnetic resonance (NMR). But a conventional low temperature superconducting (LTS) magnet cannot exceed 1 GHz (23.5 T) due to the critical magnetic field. Thus, we started a project to replace the Nb3Sn innermost coil of an existing 920 MHz NMR (21.6 T) with a Bi-2223 high temperature superconducting (HTS) innermost coil. Unfortunately, the HTS magnet cannot be operated in persistent current mode; an external dc power supply is required to operate the NMR magnet, causing magnetic field fluctuations. These fluctuations can be stabilized by a field-frequency lock system based on an external NMR detection coil. We demonstrate here such a field-frequency lock system in a 500 MHz LTS NMR magnet operated in an external current mode. The system uses a 7Li sample in a microcoil as external NMR detection system. The required field compensation is calculated from the frequency of the FID as measured with a frequency counter. The system detects the FID signal, determining the FID frequency, and calculates the required compensation coil current to stabilize the sample magnetic field. The magnetic field was stabilized at 0.05 ppm/3 h for magnetic field fluctuations of around 10 ppm. This method is especially effective for a magnet with large magnetic field fluctuations. The magnetic field of the compensation coil is relatively inhomogeneous in these cases and the inhomogeneity of the compensation coil can be taken into account. [ABSTRACT FROM AUTHOR]

Because of their high critical fields, high-Tc superconductors (HTS) are considered to be the only solution to dramatically increase the highest fields of NMR magnets. We have successfully demonstrated that a 500 MHz HTS/LTS NMR system with a Bi-2223 innermost coil could be used for solution NMR in a driven-mode operation. As the next step, the upgrade of the 920 MHz NMR system installed at the Tsukuba Magnet Laboratory is underway. The innermost Nb3Sn coil has been replaced by a Bi-2223 coil. The coil was fabricated as a layer-wound coil using five Bi-2223 conductors reinforced with bronze tapes. It was connected in series with the outer Nb3Sn and NbTi coils. The magnet is expected to generate a field of 24.2 T (1.03 GHz of ^1H resonance frequency) at an operating current of 244.4 A. The test using the Bi-2223 coil and the outer Nb3Sn coils in combination was successfully carried out. The coil has been installed in the 1.03 GHz NMR magnet. Its cooling and operation are scheduled to take place within Fiscal Year 2010. [ABSTRACT FROM AUTHOR]

Using high-Tc superconductors (HTS) is considered to be the only solution to dramatically increase the highest fields of NMRmagnets because of their high critical fields. However, it is not easy to apply HTS to an NMR spectrometer (HTS-NMR) because a persistent-mode operation with HTS cannot satisfy the field stability of 0.01 ppm/h at present. To overcome this problem, we are now developing an HTS-NMR spectrometer in a driven-mode operation. As the first step, a layer-wound coil was fabricated with bronze-reinforced Bi-2223 conductors. Instead of the Nb3Sn coil, the Bi-2223 coil was installed as the innermost part of an existing NMR magnet. The magnet operated at a field of 11.7 T with a highly stabilized power supply. NMR measurements were carried out, and it was demonstrated that the quality of the multi-dimensional NMR spectra on the protein was equivalent to that obtained with a persistent-mode system. The next step will be to demonstrate its usefulness as a high-field NMR system. The upgrade of the 920 MHz NMR system installed at the Tsukuba Magnet Laboratory is underway. Its innermost coil is scheduled to be replaced by a Bi-2223 layer-wound coil for 2010. Its target field is 24.2 T (1.03 GHz). [ABSTRACT FROM AUTHOR]

As a milestone in the 1-GHz NMR magnet project that is being carried out at the Tsukuba Magnet Laboratory (TML), a 920-MHz high-resolution NMR magnet was successfully manufactured. It is made of 15%Sn-bronze-processed (Nb, Ti)aSh, Ta-reinforced (Nb, Ti)[sub 3]Sn, and NbTi conductors. The room-temperature bore of the cryostat is 54 mm in diameter. All the coils are cooled with pressurized superfluid helium at 1.55 K. The magnet was moved to a new building of the TML in December 2001. A persistent operation at 920 MHz started in April 2002. The field homogeneity after correcting with superconducting shim coils was less than 0.1 ppm in a sample volume. Field decay decreased to below 1.3 Hz/h at the beginning of July. NMR measurements using this magnet started in July. [ABSTRACT FROM AUTHOR]

Examines the field performance of a high-resolution nuclear magnetic resonance superconducting magnet. Persistent-mode operation of the magnet; Field decay; Field homogeneity.

Describes the manufacture of bronze route Nb3Sn superconductors applied to one gigahertz nuclear magnetic resonance spectrometer. Critical current density (Jc) exhibited; Improvement in the Jc of the bronze route conductor by increasing the Sn content; Relationships between overall Jc and heat treatment temperature.