Search

• An innovative three-dimensional thermal–hydraulic code, CorTAF, was developed based on OpenFOAM. • The CorTAF is more computationally efficient with the spatial resolution of subchannel level. • The CorTAF is validated against experiment benchmarks and subchannel analysis codes. • The steady state and transient simulations of a full scale PWR core were carried out using CorTAF. In this paper, a thermal hydraulic analysis method based on open source CFD platform OpenFOAM was proposed. The models of coolant flow and heat transfer, fuel rod heat conduction and coupled heat transfer were established according to the bundle structure characteristics of PWR core, and then a nuclear reactor three-dimensional thermal–hydraulic characteristics analysis code CorTAF was developed based on finite volume method with the spatial resolution of subchannel level. The international benchmarks, including GE3 × 3, Weiss and PNL2 × 6 fuel assembly flow and heat transfer experiments, were selected to carry out the validation. The calculation results were basically consistent with the experimental data, illustrating that CorTAF is suitable for predicting the flow and heat transfer characteristics of coolant in the rod bundle fuel assembly. The thermal–hydraulic characteristics of fuel assembly and PWR core under full power operation and blockage accident conditions were simulated using CorTAF. The steady-state and transient spatial distribution of physical quantities in subchannel-scale including coolant and fuel rod temperature were obtained, and the influence of blockage condition on flow and heat transfer characteristics was analyzed. This work has reference significance for the development of core thermal hydraulic analysis tools for PWR. [ABSTRACT FROM AUTHOR]

Fuel pins assembled in Pressurized Water Reactor (PWR) and Liquid Metal-cooled Fast Reactor (LMFR) core are usually cooled by single-phase coolant such as water or liquid metal. Researches on the coolant flow and heat transfer phenomena through rod bundles is quite essential for the nuclear reactor core design. This paper briefly summaries the current developments of Computational Fluid Dynamics (CFD) studies on the thermal hydraulic analysis of single-phase flow in the rod bundles of nuclear reactor core. On account of the tremendous amount of publications related to each aspect above, this brief review would focus on the most representative researches in the past decades. The aim of this paper is to provide an outline and present a comprehensive overview of the CFD research and guidelines on single-phase flow through bare rod bundle rod with mixing vane spacer and wrapped wire spacer in reactor core. In addition, the analysis and validation methods for various CFD calculating methods are concluded. The applications of CFD approach with different type of rod bundles are summarized. Finally, some remaining challenges for future work are proposed and discussed. [ABSTRACT FROM AUTHOR]

• A new boron diffusion model is proposed for the nuclear reactor core analysis. • The effect of turbulent diffusion is taken into consideration. • The model is implemented in the subchannel analysis code. • The CFD method is used to verify the new model. The diffusion characteristic of borated water in nuclear reactor core is important for the reactivity control during some possible reactivity transient scenarios. The non-uniform distributions of boron concentration increase the risk of reactor accidents and lead to some reactor safety problems. Hence it is necessary to develop an effective boron diffusion model into the reactor thermal-hydraulic analysis code. In this paper, a quasi-three dimensional boron tracking model, in which the turbulent diffusion effect was considered carefully, was proposed and successfully implemented in the subchannel analysis code. The reliable CFD method with k-omega turbulent model validated against International Standard Problem (ISP No. 43) experimental data was used to verify the feasibility of proposed boron tracking model. A typical Pressurized Water Reactor (PWR) 3 × 3 fuel bundle model was established and the borated water was injected into one specified channel and pure water into other channels. The distributions and variations of boron concentration along the flow direction were achieved and analyzed. Results indicate that the proposed boron tracking model could predict the boron diffusion process in the fuel rod bundles more accurately compared with the original model. This work provides an essential supplement for the nuclear reactor subchannel analysis method. [ABSTRACT FROM AUTHOR]