Search

The lead-bismuth cooled fast reactor core adopts box-type design, and the fuel rod bundle is fixed by wrapping wires. The complex geometric structure of the fuel assemblies significantly affects the flow and heat transfer status of the liquid metal coolant. Building upon the open-source CFD platform, OpenFOAM, this work established conservation equations for liquid metal coolant, fuel rod thermal characteristic models, inter-wrapper coolant analysis models, and coupled heat transfer models, and developed the subchannel level thermal-hydraulic analysis code CorTAF-LBE for whole-core analysis of LBR core using the finite volume method. The wire-wrapped rod bundles internal flow and heat transfer experiments of lead-bismuth, carried out based on the THEADES and KYLIN-II circulation loops, were selected to perform verification and validation. The results match well with the experimental data and CFD fine-modeling prediction. The steady-state numerical simulation of three wire-wrapped rod bundle assemblies with inter-wrapper flow was carried out under normal operation condition. The temperature and pressure distributions of the coolant in each subchannel and inter-wrapper flow region, the temperature of cladding and other key thermal-hydraulic parameters were obtained. The role of the inter-wrapper coolant in heat removal from the fuel assemblies was revealed. The work in this paper has referential value for the optimization of lead-bismuth cooled fast reactor design and safety assessment during operation. [ABSTRACT FROM AUTHOR]

Fuel pins assembled in Pressurized Water Reactor (PWR) and Liquid Metal-cooled Fast Reactor (LMFR) core are usually cooled by single-phase coolant such as water or liquid metal. Researches on the coolant flow and heat transfer phenomena through rod bundles is quite essential for the nuclear reactor core design. This paper briefly summaries the current developments of Computational Fluid Dynamics (CFD) studies on the thermal hydraulic analysis of single-phase flow in the rod bundles of nuclear reactor core. On account of the tremendous amount of publications related to each aspect above, this brief review would focus on the most representative researches in the past decades. The aim of this paper is to provide an outline and present a comprehensive overview of the CFD research and guidelines on single-phase flow through bare rod bundle rod with mixing vane spacer and wrapped wire spacer in reactor core. In addition, the analysis and validation methods for various CFD calculating methods are concluded. The applications of CFD approach with different type of rod bundles are summarized. Finally, some remaining challenges for future work are proposed and discussed. [ABSTRACT FROM AUTHOR]