Search

Background: Construction workers are at a high risk of exposure to various types of hazardous substances such as crystalline silica. Though multiple studies indicate the evidence regarding the effectiveness of different silica exposure reduction interventions in the construction sector, the decisions for selecting a specific silica exposure reduction intervention are best informed by an economic evaluation. Economic evaluation of interventions is subjected to uncertainties in practice, mostly due to the lack of precise data on important variables. In this study, we aim to identify the most cost-beneficial silica exposure reduction intervention for the construction sector under uncertain situations., Methods: We apply a probabilistic modeling approach that covers a large number of variables relevant to the cost of lung cancer, as well as the costs of silica exposure reduction interventions. To estimate the societal lifetime cost of lung cancer, we use an incidence cost approach. To estimate the net benefit of each intervention, we compare the expected cost of lung cancer cases averted, with expected cost of implementation of the intervention in one calendar year. Sensitivity analysis is used to quantify how different variables affect interventions net benefit., Results: A positive net benefit is expected for all considered interventions. The highest number of lung cancer cases are averted by combined use of wet method, local exhaust ventilation and personal protective equipment, about 107 cases, with expected net benefit of $45.9 million. Results also suggest that the level of exposure is an important determinant for the selection of the most cost-beneficial intervention., Conclusions: This study provides important insights for decision makers about silica exposure reduction interventions in the construction sector. It also provides an overview of the potential advantages of using probabilistic modeling approach to undertake economic evaluations, particularly when researchers are confronted with a large number of uncertain variables.

Solar ultraviolet (UV) radiation is the second most prevalent carcinogenic exposure in Canada and is similarly important in other countries with large Caucasian populations. The objective of this article was to estimate the economic burden associated with newly diagnosed non-melanoma skin cancers (NMSCs) attributable to occupational solar radiation exposure. Key cost categories considered were direct costs (healthcare costs, out-of-pocket costs (OOPCs), and informal caregiver costs); indirect costs (productivity/output costs and home production costs); and intangible costs (monetary value of the loss of health-related quality of life (HRQoL)). To generate the burden estimates, we used secondary data from multiple sources applied to computational methods developed from an extensive review of the literature. An estimated 2,846 (5.3%) of the 53,696 newly diagnosed cases of basal cell carcinoma (BCC) and 1,710 (9.2%) of the 18,549 newly diagnosed cases of squamous cell carcinoma (SCC) in 2011 in Canada were attributable to occupational solar radiation exposure. The combined total for direct and indirect costs of occupational NMSC cases is $28.9 million ($15.9 million for BCC and $13.0 million for SCC), and for intangible costs is $5.7 million ($0.6 million for BCC and $5.1 million for SCC). On a per-case basis, the total costs are $5,670 for BCC and $10,555 for SCC. The higher per-case cost for SCC is largely a result of a lower survival rate, and hence higher indirect and intangible costs. Our estimates can be used to raise awareness of occupational solar UV exposure as an important causal factor in NMSCs and can highlight the importance of occupational BCC and SCC among other occupational cancers.

Background: Widespread use of X-band frequency (a part of the super high frequency microwave) in the various workplaces would contribute to occupational exposure with potential of adverse health effects.  According to limited study on microwave shielding for the workplace, this study tried to prepare a new microwave shielding for this purpose., Methods: We used EI-403 epoxy thermosetting resin as a matrix and nickel oxide nanoparticle with the diameter of 15-35 nm as filler. The Epoxy/ Nickel oxide composites with 5, 7, 9 and 11 wt% were made in three different thicknesses (2, 4 and 6 mm). According to transmission / reflection method, shielding effectiveness (SE) in the X-band frequency range (8-12.5 GHz) was measured by scattering parameters directly given by the 2-port Vector Network Analyzer. The fabricated composites characterized by X-ray Diffraction and Field Emission Scanning Electron Microscope., Results: The best average of shielding effectiveness in each thickness of fabricated composites obtained by 11%-2 mm, 7%-4 mm and 7%-6 mm composites with SE values of 46.80%, 66.72% and 64.52%, respectively. In addition, the 11%-6 mm, 5%-6 mm and 11%-4 mm-fabricated composites were able to attenuate extremely the incident microwave energy at 8.01, 8.51 and 8.53 GHz by SE of 84.14%, 83.57 and 81.30%, respectively., Conclusions: The 7%-4mm composite could be introduced as a suitable alternative microwave shield in radiation protection topics in order to its proper SE and other preferable properties such as low cost and weight, resistance to corrosion etc. It is necessary to develop and investigate the efficacy of the fabricated composites in the fields by future studies.

Shift work is associated with sleep deprivation, occupational stress, and increased risk of depression. Depressed patients show increased oxidative stress. During excessive oxidative stress, Malondialdehyde (MDA) increases and total antioxidant capacity (TAC) decreases in body. This cross-sectional study was conducted to determine the serum level of TAC and MDA among depressed rotational shift workers in Shahid Tondooyan Tehran Oil Refinery. 21-item Beck Depression Inventory was used to measure depression level. The level of TAC and MDA was measured by 8 mL fasting blood sample. MDA was determined by thiobarbituric acid reaction. Serum total antioxidants were measured using the ABTS. Results of this study showed that TAC mean and standard deviation concentration was 2.451 (±0.536) mg/dL and MDA was 3.725 (±1.098) mic·mol/L, and mean and standard deviation of depression score and BMI were 14.07 (±3.84) and 24.92 (±3.65) kg/m(2), respectively. Depression score had a positive correlation with rotational shift work experience and work experience (r = 0.218 and r = 0.212), respectively, (P < 0.05).

Previous work has demonstrated that the shield gas composition in gas metal arc welding can have a considerable effect on hexavalent chromium [Cr(VI)] concentration in the fume and on ozone concentrations near the arc. Normally a single shield gas is used. This paper describes a double shroud torch that allows used of concentric shield gases of different compositions. A solid stainless steel wire was used for welding. The double shroud torch used secondary shield gases containing small amounts of the reducing agents NO and C2H4. The Cr(VI) concentration in the fume and ozone concentration at a fixed point relative to the arc were measured and compared with results when using a single shield gas. Use of the reducing agents in secondary shielding using the double shroud torch was found to offer advantages for ozone concentration reduction compared with use in a conventional torch, but this was not found to be an advantage for reducing Cr(VI) concentrations.

Hexavalent chromium [Cr(VI)] and ozone are produced in many arc-welding processes. Cr(VI) is formed when welding with chromium-containing alloys and is a suspected carcinogen. Ozone is formed by the action of ultraviolet light from the arc on oxygen and can cause severe irritation to the eyes and mucous membranes. Previous work has demonstrated that reduction of sodium and potassium in manual metal arc-welding electrodes leads to substantial reductions in Cr(VI) concentrations in the fume as well as a reduction in the fume formation rate. In this paper replacement of potassium by lithium in a tubular wire welding electrode (self-shielding flux-cored) is shown to give reductions in Cr(VI) concentrations and fume formation rates. Previous work has also demonstrated that use of a tubular wire (metal cored) containing 1% zinc can, under certain conditions, result in a reduction in Cr(VI) formation rate and in ozone concentration near the arc but with a rise in the total fume formation rate. The effects of different shield gases and different levels of zinc are examined. An experimental chromium-containing tubular wire with 1% zinc was used with the following shield gases: argon, Argoshield 5, Argoshield 20, Helishield 101, Ar + 2% CO2, Ar + 5% CO2, Ar + 1% O2 and Ar + 2% O2. The wire gave > 98% reduction in Cr(VI) formation rate compared to the control wire provided the shield gas contained no oxygen. When the shield gas did contain oxygen, 1% zinc enhanced Cr(VI) formation rate, resulting in more than double the rates measured when welding with the control wire. Experiments with zinc concentrations, from 0.018 to 0.9% using Helishield 101, gave results indicating that there is an optimum zinc concentration from the point of view of Cr(VI) reduction. Implications of the use of lithium or zinc on the overall exposure risk are discussed.

This paper describes the relationships between ultra-violet emission, ozone generation and CrVI production in MIG welding which were measured as a function of shield gas flow rate, welding voltage, electrode stick-out and shield gas composition using an automatic welding rig that permitted MIG welding under reproducible conditions. The experimental results are interpreted in terms of the physico-chemical processes occurring in the micro- and macro-environments of the arc as part of research into process modification to reduce occupational exposure to ozone and CrVI production rates in MIG welding. We believe the techniques described here, and in particular the use of what we have termed u.v.-ozone measurements, will prove useful in further study of ozone generation and CrVI formation and may be applied in the investigation of engineering control of occupational exposure in MIG and other welding process such as Manual Metal Arc (MMA) and Tungsten Inert Gas (TIG).