Search

Parallel detection approaches are of interest to many researchers interested in identifying multiple water and foodborne pathogens simultaneously. Availability and cost-effectiveness are two key factors determining the usefulness of such approaches for laboratories with limited resources. In this study, we developed and validated a high-density microarray for simultaneous screening of 14 bacterial pathogens using an approach that employs gold labeling with silver enhancement (GLS) protocol. In total, 8887 probes (50-mer) were designed using an in-house database of virulence and marker genes (VMGs), and synthesized in quadruplicate on glass slides using an in-situ synthesis technology. Target VMG amplicons were obtained using multiplex polymerase chain reaction (PCR), labeled with biotin, and hybridized to the microarray. The signals generated after gold deposition and silver enhancement, were quantified using a flatbed scanner having 2-μm resolution. Data analysis indicated that reliable presence/absence calls could be made, if: i) over four probes were used per gene, ii) the signal-to-noise ratio (SNR) cutoff was greater than or equal to two, and iii) the positive fraction (PF), i.e., number of probes with SNR≥2 for a given VMG was greater than 0.75. Hybridization of the array with blind samples resulted in 100% correct calls, and no false positive. Because amplicons were obtained by multiplex PCR, sensitivity of this method is similar to PCR. This assay is an inexpensive and reliable technique for high throughput screening of multiple pathogens., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Sewage pollution remains the most significant source of human waterborne pathogens. This study describes the detection and characterization of human enteric viruses in community wastewaters using cell culture coupled with multiple target microarrays (with a total of 780 unique probes targeting 27 different groups of both DNA and RNA viruses) and polymerase chain reaction (PCR) assays. Over a 13-month sampling period, RNA viruses (astroviruses and enteroviruses) were more frequently detected compared to DNA viruses (adenoviruses, particularly type 41 and BK polyomavirus). Overall, many more viruses were shed during the winter months (December-February) compared to the summer months. Exploration of the multiple types of enteric viruses particularly in winter months identified much more significant prevalence of key viral pathogens associated with sewage pollution of the water environment than previously realized and seasonal disinfection used in some parts of the world may lead to a seeding of ambient waters. Molecular characterization of pathogenic viruses in community wastewater will improve the understanding of the potential risk of waterborne disease transmission of viral pathogens.

OligoArrayDb is a comprehensive database containing pangenomic oligonucleotide microarray probe sets designed for most of the sequenced genomes that are not covered by commercial catalog arrays. The availability of probe sequences, associated with custom microarray fabrication services offered by many companies and cores presents the unequalled possibility to perform microarray experiments on most of the sequenced organisms. OligoArrayDb contains more than 2.8 probes per gene in average for more than 600 organisms, mostly archaea and bacteria strains available from public database. On average, 98% of the annotated genes have at least one probe which is predicted to be specific to its intended target in >94% of the cases. OligoArrayDb is weekly updated as new sequenced genomes become available. Probe sequences, in addition to a comprehensive set of annotations can be downloaded from this database. OligoArrayDb is publicly accessible online at http://berry.engin.umich.edu/oligoarraydb.

Dangling ends and surface-proximal tails of gene targets influence probe-target duplex formation and affect the signal intensity of probes on diagnostic microarrays. This phenomenon was evaluated using an oligonucleotide microarray containing 18-mer probes corresponding to the 16S rRNA genes of 10 waterborne pathogens and a number of synthetic and PCR-amplified gene targets. Signal intensities for Klenow/random primer-labeled 16S rRNA gene targets were dissimilar from those for 45-mer synthetic targets for nearly 73% of the probes tested. Klenow/random primer-labeled targets resulted in an interaction with a complex mixture of 16S rRNA genes (used as the background) 3.7 times higher than the interaction of 45-mer targets with the same mixture. A 7-base-long dangling end sequence with perfect homology to another single-stranded background DNA sequence was sufficient to produce a cross-hybridization signal that was as strong as the signal obtained by the probe-target duplex itself. Gibbs free energy between the target and a well-defined background was found to be a better indicator of hybridization signal intensity than the sequence or length of the dangling end alone. The dangling end (Gibbs free energy of -7.6 kcal/mol) was found to be significantly more prone to target-background interaction than the surface-proximal tail (Gibbs free energy of -64.5 kcal/mol). This study underlines the need for careful target preparation and evaluation of signal intensities for diagnostic arrays using 16S rRNA and other gene targets due to the potential for target interaction with a complex background.

Two collections of oligonucleotides have been designed for preparing pangenomic human and mouse microarrays. A total of 148,993 and 121,703 oligonucleotides were designed against human and mouse transcripts. Quality scores were created in order to select 25,342 human and 24,109 mouse oligonucleotides. They correspond to: (i) a BLAST-specificity score; (ii) the number of expressed sequence tags matching each probe; (iii) the distance to the 3' end of the target mRNA. Scores were also used to compare in silico the two microarrays with commercial microarrays. The sets described here, called RNG/MRC collections, appear at least as specific and sensitive as those from the commercial platforms. The RNG/MRC collections have now been used by an Anglo-French consortium to distribute more than 3500 microarrays to the academic community. Ad hoc identification of tissue-specific transcripts and a approximately 80% correlation with hybridizations performed on Affymetrix GeneChiptrade mark suggest that the RNG/MRC microarrays perform well. This work provides a comprehensive open resource for investigators working on human and mouse transcriptomes, as well as a generic method to generate new microarray collections in other organisms. All information related to these probes, as well as additional information about commercial microarrays have been stored in a freely-accessible database called MEDIANTE.

Nucleic acid hybridization serves as backbone for many high-throughput systems for detection, expression analysis, comparative genomics and re-sequencing. Specificity of hybridization between probes and intended targets is always critical. Approaches to ensure and evaluate specificity include use of mismatch probes, obtaining dissociation curves rather than single temperature hybridizations, and comparative hybridizations. In this study, we quantify effects of mismatch type and position on intensity of hybridization signals and provide a new approach based on dissociation rate constants to evaluate specificity of hybridized signals in complex target mixtures. Using an extensive set of 18mer oligonucleotide probes on an in situ synthesized biochip platform, we demonstrate that mismatches in the center of the probe are more discriminating than mismatches toward the extremities of the probe and mismatches toward the attached end are less discriminating than those toward the loose end. The observed destabilizing effect of a mismatch type agreed in general with predictions using the nearest neighbor model. Use of a new parameter, specific dissociation temperature (T(d-w), temperature of maximum specific dissociation rate constant), obtained from probe-target duplex dissociation profiles considerably improved the evaluation of specificity. These results have broad implications for hybridization data obtained from complex mixtures of nucleic acids.

Testing the many hypotheses from genomics and systems biology experiments demands accurate and cost-effective gene and genome synthesis. Here we describe a microchip-based technology for multiplex gene synthesis. Pools of thousands of 'construction' oligonucleotides and tagged complementary 'selection' oligonucleotides are synthesized on photo-programmable microfluidic chips, released, amplified and selected by hybridization to reduce synthesis errors ninefold. A one-step polymerase assembly multiplexing reaction assembles these into multiple genes. This technology enabled us to synthesize all 21 genes that encode the proteins of the Escherichia coli 30S ribosomal subunit, and to optimize their translation efficiency in vitro through alteration of codon bias. This is a significant step towards the synthesis of ribosomes in vitro and should have utility for synthetic biology in general.

Development of parallel detection tools using microarrays is critically reviewed in view of the need for screening multiple microorganisms in a single test. Potential research needs with respect to probe design and specificity, validation, sample concentration, selective target enrichment and amplification, and data analysis are discussed. Data illustrating selected probe design issues for detecting multiple targets in mixed microbial systems is presented. Challenges with respect to cost, time, and ease of use compared to other methods are also summarized.

Large DNA constructs of arbitrary sequences can currently be assembled with relative ease by joining short synthetic oligodeoxynucleotides (oligonucleotides). The ability to mass produce these synthetic genes readily will have a significant impact on research in biology and medicine. Presently, high-throughput gene synthesis is unlikely, due to the limits of oligonucleotide synthesis. We describe a microfluidic PicoArray method for the simultaneous synthesis and purification of oligonucleotides that are designed for multiplex gene synthesis. Given the demand for highly pure oligonucleotides in gene synthesis processes, we used a model to improve key reaction steps in DNA synthesis. The oligonucleotides obtained were successfully used in ligation under thermal cycling conditions to generate DNA constructs of several hundreds of base pairs. Protein expression using the gene thus synthesized was demonstrated. We used a DNA assembly strategy, i.e. ligation followed by fusion PCR, and achieved effective assembling of up to 10 kb DNA constructs. These results illustrate the potential of microfluidics-based ultra-fast oligonucleotide parallel synthesis as an enabling tool for modern synthetic biology applications, such as the construction of genome-scale molecular clones and cell-free large scale protein expression.

We designed and successfully implemented the use of in situ-synthesized 45-mer oligonucleotide DNA microarrays (XeoChips) for genome-wide expression profiling of Burkholderia xenovorans LB400, which is among the best aerobic polychlorinated biphenyl degraders known so far. We conducted differential gene expression profiling during exponential growth on succinate, benzoate, and biphenyl as sole carbon sources and investigated the transcriptome of early-stationary-phase cells grown on biphenyl. Based on these experiments, we outlined metabolic pathways and summarized other cellular functions in the organism relevant for biphenyl and benzoate degradation. All genes previously identified as being directly involved in biphenyl degradation were up-regulated when cells were grown on biphenyl compared to expression in succinate-grown cells. For benzoate degradation, however, genes for an aerobic coenzyme A activation pathway were up-regulated in biphenyl-grown cells, while the pathway for benzoate degradation via hydroxylation was up-regulated in benzoate-grown cells. The early-stationary-phase biphenyl-grown cells showed similar expression of biphenyl pathway genes, but a surprising up-regulation of C(1) metabolic pathway genes was observed. The microarray results were validated by quantitative reverse transcription PCR with a subset of genes of interest. The XeoChips showed a chip-to-chip variation of 13.9%, compared to the 21.6% variation for spotted oligonucleotide microarrays, which is less variation than that typically reported for PCR product microarrays.

This contribution presents a brief overall look of the methods for the preparation of various types of DNA microarrays and a thorough examination of the methods for in situ synthesis of oligonucleotide microarrays., (2004 Wiley Periodicals, Inc.)

There is a substantial interest in implementing bioinformatics technologies that allow the design of oligonucleotides to support the development of microarrays made from short synthetic DNA fragments spotted or in situ synthesized on slides. Ideally, such oligonucleotides should be totally specific to their respective targets to avoid any cross-hybridization and should not form stable secondary structures that may interfere with the labeled probes during hybridization. We have developed OligoArray 2.0, a program that designs specific oligonucleotides at the genomic scale. It uses a thermodynamic approach to predict secondary structures and to calculate the specificity of targets on chips for a unique probe in a mixture of labeled probes. Furthermore, OligoArray 2.0 can adjust the oligonucleotide length, according to user input, to fit a narrow T(m) range compatible with hybridization requirements. Combined with on chip oligonucleotide synthesis, this program makes it feasible to perform expression analysis on a genomic scale for any organism for which the genome sequence is known. This is without relying on cDNA or oligonucleotide libraries. OligoArray 2.0 was used to design 75 764 oligonucleotides representing 26 140 transcripts from Arabidopsis thaliana. Among this set, we provide at least one specific oligonucleotide for 93% of these transcripts.

Miniaturized, spatially addressable microchips of peptides and peptidomimetics are powerful tools for high-throughput biomedical and pharmaceutical research and the advancement of proteomics. Here we report an efficient and flexible method for the parallel synthesis of peptides on individually addressable microchips, using digital photolithography and photogenerated acid in the deprotection step. We demonstrate that we are able to synthesize thousands of peptides in a 1 cm(2) area on a microchip using 20 natural amino acids as well as synthetic amino acid analogs, with high stepwise yields and short reaction-cycle times. Epitope screening experiments using a p53 antibody (PAb240) produced clearly defined binding patterns. The peptidomimetic sequences on the microchip show specific antibody binding and provide insights into the molecular details responsible for specificity of epitope binding. Our approach requires just a conventional synthesizer and a computer-controllable optical module, thereby allowing potential development of peptide microchips for various pharmaceutical and proteomic applications in routine research laboratories.