Search

Microarray technology has become an important tool for detection and analysis of nucleic acid targets. Immobilization of modified and unmodified oligonucleotides on epoxy-functionalized glass surfaces is often used in microarray fabrication. Here, we demonstrate a protocol that employs coating of SU-8 (glycidyl ether of bisphenol A) onto glass microslides to obtain high density of epoxy functions for efficient immobilization of aminoalkyl-, thiophosphoryl-, and phosphorylated oligonucleotides with uniform spot morphology. The resulting microarrays exhibited high immobilization (∼65%) and hybridization efficiency (30-36%) and were sufficiently stable over a range of temperature and pH conditions. The prominent feature of the protocol is that spots can be visualized distinctly at 0.05 μM probe (a 20-mer oligonucleotide) concentration. The constructed microarrays were subsequently used for detection of base mismatches and bacterial diseases (meningitis and typhoid).

The development of oligonucleotide-based microarrays (biochips) is a major thrust area in the rapidly growing biotechnology industry, which encompasses a diverse range of research areas including genomics, proteomics, computational biology, and pharmaceuticals, among other activities. Microarray experiments have proved to be unique in offering cost-effective and efficient analysis at the genomic level. In the last few years, biochips have gained increasing acceptance in the study of genetic and cellular processes. As the increase in experimental throughput has posed many challenges to the research community, considerable progress has been made in the advancement of microarray technology. In this review, chemical strategies for immobilization of oligonucleotides have been highlighted with special emphasis on post-synthetic immobilization of oligonucleotides on glass surface. The major objective of this article is to make the researchers acquainted with some most recent advances in this area.

Oligonucleotide-based arrays are increasingly becoming useful tools for the analysis of gene expression and single-nucleotide polymorphism. Here, we report a method that allows the direct immobilization of thiolated oligonucleotides onto an epoxy-activated glass surface via a stable thioether linkage under microwaves. The described chemistry efficiently immobilizes the probes via terminal thiol groups with uniform spot morphology. The thioether linkage could endure repeated PCR-like heat cycling with only 2.5% loss after 20 cycles, indicating that the chemistry can be used in integrated PCR/microarray devices. The highlighting feature of the proposed method is that the detection limit for the probe concentration can be reduced to 0.25 microM with 20-mer oligonucleotides. The efficiency of the projected method (approximately 33%) indicates its advantage over the existing standard methods, viz., NTMTA (approximately 9.8%), epoxide-amine (approximately 9.8%) and disulfide (approximately 1.7%). The constructed microarrays were validated through the detection of base mismatches and bacterial meningitis. These features make the projected strategy ideal for manufacturing oligonucleotide arrays and detection of mismatches and bacterial diseases.

A new protocol has been described for solid phase preparation of 3'- and 5'-aminooxylalkylated oligonucleotides using commercially available reagents. This involves attachment of linker 4 either with an LCAA-CPG support via succinoylation followed by synthesis (3'-aminooxyalkylated oligomers) or formation of its phosphoramidite 6 followed by coupling with desired oligomer (for generating 5'-aminooxyalkylated oligomers). Both the routes produced modified oligonucleotides in sufficiently high yields and purity (on HPLC) via conventional oligonucleotide synthesis on an automated synthesizer and deprotection step using aqueous ammonia (16 h, 60 degrees C). Aminooxyalkylated oligonucleotides were used to construct microarrays on glass surface (biochips). The performance of the biochips was evaluated by immobilizing modified oligonucleotides on epoxylated glass microslides under different sets of conditions with respect to pH, temperature and time. Further, the constructed microarrays were successfully used for detection of nucleotide mismatches and bacterial typhoid.

In the last few years, DNA-microarray technology has emerged as a powerful tool for gene discovery, detection of mutations, and mapping. Here, we have developed a simple and efficient single-step method for immobilization of phosphoryl-, mercaptoalkyl-, thiophosphoryl- and aminooxyalkylated oligonucleotides onto an epoxylated glass surface. It resulted in higher immobilization and hybridization efficiency in comparison to those obtained with the standard method. The probes immobilized were found to be stable over a range of temperature and pH, suggesting that the chemistry could be used in integrated PCR/microarray devices. Also the immobilized spots were found to be of superior quality in terms of spot morphology, homogeneity and signal reproducibility. The constructed microarrays were successfully used for the discrimination of nucleotide mismatches and detection of bacterial diseases.

In recent years, the oligonucleotide-based microarray technique has emerged as a powerful and promising tool for various molecular biological studies. Here, a facile protocol for the construction of an oligonucleotide microarray is demonstrated that involves immobilization of oligonucleotide-trimethoxysilyl conjugates onto virgin glass microslides. The projected immobilization strategy reflects high immobilization efficiency ( approximately 36-40%) and signal-to-noise ratio ( approximately 98), and hybridization efficiency ( approximately 32-35%). Using the proposed protocol, aminoalkyl, mercaptoalkyl, and phosphorylated oligonucleotides were immobilized onto virgin glass microslides. Briefly, modified oligonucleotides were reacted first with 3-glycidyloxypropyltriethoxysilane (GOPTS), and subsequently, the resultant conjugates were directly immobilized onto the virgin glass surface by making use of silanization chemistry. The constructed microarrays were then used for discrimination of base mismatches. On subjecting to different pH and thermal conditions, the microarray showed sufficient stability. Application of this chemistry to manufacture oligonucleotide probe-based microarrays for detection of bacterial meningitis is demonstrated. Single-step reaction for the formation of conjugates with the commercially available reagent (GOPTS), omission of capping step and surface modification, and efficient immobilization of oligonucleotides onto the virgin glass surface are the key features of the proposed strategy.

We have demonstrated that the dynamics of nucleic acid hybridization in microarrays depend on the physical structure of immobilized probes. We have immobilized oligonucleotide-3'-phosphates with and without stem-loop structure on epoxylated glass surface, followed by hybridization under different conditions, viz., hybridization buffer, pH condition, temperature and ionic strength. In a comparative study, we have established that array constructed using probes with stem-loop structure displayed approximately 2.2 times higher hybridization signals than the probes without it. The stem-loop DNA array format is simple and flexible in design and thus potentially useful in various DNA diagnostic tests.

A number of hetero- and homobifunctional reagents have been reported to immobilize biomolecules on a variety of supports. However, efforts are on to search for a method, which is relatively simple, involving minimum of steps, cost effective, easy to reproduce, and that produces stable oligonucleotide arrays. Two new reagents, viz., [N-(2-trifluoroethanesulfonatoethyl)-N-(methyl)-triethoxysilylpropyl-3-amine], and [N-(3-trifluoroethanesulfonyloxypropyl)anthraquinone-2-carboxamide] have been designed considering the above points. These reagents contain different functional groups at their two ends. In [N-(2-trifluoroethanesulfonatoethyl)-N-(methyl)-triethoxysilylpropyl-3-amine], one end (triethoxysilyl) is capable of binding to the virgin glass surface and the other one consists of trifluoroethanesulfonate (tresyl) function specific toward aminoalkyl and mercaptoalkyl functionalities, which are easy to introduce at the 3'- or 5'-end of oligonucleotides. Likewise, in [N-(3-trifluoroethanesulfonyloxypropyl)anthraquinone-2-carboxamide], one end consists of photoactivatable moiety (anthraquinone) capable of reacting to a C-H containing surface and the tresyl function at the other end reacts specifically with aminoalkyl and mercaptoalkyl functionalities in modified oligonucleotides. These reagents have successfully been utilized to construct a number of oligonucleotide arrays and subsequently used for the detection of mismatches.

A new immobilization chemistry for covalent attachment of phosphorylated oligonucleotides on epoxy-activated glass surface via opening of oxirane ring is described. The proposed strategy results in excellent immobilization efficiency, spot homogeneity, and morphology. The constructed microarray was successfully demonstrated for discrimination of nucleotide mismatches.

Synthesis of a new heterobifunctional reagent, N-(3-triethoxysilylpropyl)-6-(N-maleimido)-hexanamide (TPMH), for the preparation of oligonucleotide microarrays is described. Its triethoxysilyl function is specific toward virgin glass surface and maleimide function undergoes conjugate addition to 3'- or 5'-thiol-modified oligonucleotides. The construction of microarrays using TPMH has been realized via two routes. In Route A, TPMH was reacted first with 3'- or 5'-thiol-modified oligonucleotide under microwaves, thereby producing oligonucleotide-triethoxysilyl conjugate in 15min, which was then brought in contact with virgin glass microslide, resulting in immobilization of an oligonucleotide sequence. In Route B, immobilization involves generation of maleimide functions on virgin glass surface by the reaction with TPMH, followed by coupling with thiol-modified oligonucleotides under microwaves in 15 min to produce surface-bound oligonucleotides. The microarrays constructed using both routes were analyzed by hybridizing with tetrachlorofluorescein-labeled complementary oligonucleotide. Subsequently, these microarrays were successfully used in the discrimination of single and double nucleotide mismatches based on fluorescence intensity.

A facile and efficient method for direct immobilization of phosphorylated oligonucleotides on an epoxy-activated glass surface is described. The new immobilization strategy has been analyzed for its performance in DNA microarray under both microwave and thermal conditions. It reflects high immobilization efficiency ( approximately 23%), and signal-to-noise ratio ( approximately 98) and resulted in high hybridization efficiency ( approximately 36%) in comparison to those obtained with standard methods, viz., NTMTA ( approximately 9.76%) and epoxide-amine ( approximately 9.82%). The probes immobilized through the new strategy were found to be heat-stable, since the performance of microarray decreased by only approximately 7% after subjecting it to 20 PCR-like heat cycles, suggesting that the chemistry could be used in integrated PCR/microarray devices. The immobilization of probes following the proposed chemistry resulted in spots of superior quality in terms of spot morphology, spot homogeneity, and signal reproducibility. The constructed microarrays have been successfully used for the discrimination of nucleotide mismatches. In conclusion, these features make the new immobilization strategy ideal for facile, efficient, and cost-effective manufacturing of DNA microarrays.

A universal reagent 1-O-(4,4'-dimethoxytrityl)-6-aminohexanol (DTAH) is described for the estimation of surface-bound functionalities (epoxy, aldehyde, and carboxyl) required for preparation of oligonucleotide arrays (biochips). The method involves the reaction of universal reagent DTAH with surface-bound functionality under microwaves for 10 min, followed by washings to remove the excess reagent. In the subsequent step, a weighed amount of DTAH-treated surface is exposed to acid to liberate 4,4'-dimethoxytrityl cation, which is measured at 505 nm to determine the functional group loading on the surface.

A rapid method for construction of oligonucleotide arrays on a glass surface, using a novel heterobifunctional reagent, N-(2-trifluoroethanesulfonatoethyl)-N-(methyl)-triethoxysilylpropyl-3-amine (NTMTA), has been described. The heterobifunctional reagent, NTMTA, carries two different thermoreactive groups. The triethoxysilyl group on one end is specific towards silanol functions on the virgin glass surface, while the trifluoroethanesulfonyl (tresyl) group on the other end of the reagent reacts specifically with aminoalkyl- or mercaptoalkyl- functionalized oligonucleotides. Immobilization of oligonucleotides on a glass surface has been realized via two routes. In the first one (A), 5'- aminoalkyl- or mercaptoalkyl-functionalized oligonucleotides were allowed to react with NTMTA to form a oligonucleotide-triethoxysilyl conjugate which, in a subsequent reaction with unmodified (virgin) glass microslide, results in surface-bound oligonucleotides. In the second route (B), the NTMTA reagent reacts first with a glass microslide whereby it generates trifluoroethanesulfonate ester functions on it, which in a subsequent step react with 5'-aminoalkyl or mercaptoalkyl oligonucleotides to generate support-bound oligonucleotides. Subsequently, the oligonucleotide arrays prepared by both routes were analyzed by hybridization experiments with complementary oligonucleotides. The constructed microarrays were successfully used in single and multiple nucleotide mismatch detection by hybridizing these with fluorescein-labeled complementary oligonucleotides. Further more, the proposed method was compared with the existing methods with respect to immobilization efficiency of oligonucleotides.

A simple method has been devised to construct oligonucleotide array on a variety of surfaces using commonly available reagents and chemistry with good efficiency and accuracy. The method involves the generation of hydroxyl functionalities on glass, polypropylene, polyethylene, and commonly used surfaces for construction of oligonucleotide arrays followed by their activation with trifluoroethanesulfonyl chloride (tresyl chloride). The activated surface in the subsequent reaction is used to covalently immobilize oligonucleotides in regioselective fashion to create an oligonucleotide array. The surface bound tresyl sulfonate esters allow the immobilization of oligonucleotides specifically via their 3'- or 5'-end having mercaptohexyl- or aminohexyl functionalities. The constructed oligonucleotide arrays were successfully used to analyze oligonucleotides by hybridization technique.