Search

High capacity transmission with a data rate over 10.66 Pb/s is demonstrated in a 13 km, 38-core-3-mode few-mode multi-core fiber. This was achieved with a single optical comb source to generate 368 × 24.5 GBaud 64- or 256-quadrature-amplitude-modulated signals in a 25 GHz wavelength channel grid in combination with a few-mode multi-core fiber with high uniformity amongst cores. We investigated essential transmission channel characteristics and found that mode-dependent loss strongly decreases the achievable data rates in some cores, while we did not observe a correlation between varying impulse response spread and data rate. We further did not find an influence of the (radial) position of a core within the cladding on the data rate. Finally, we explored the potential of multi-span transmission over the same fiber with transmission distances up to 65 km, showing a strong performance penalty from prototype components with sub-optimal transmission properties. [ABSTRACT FROM AUTHOR]

We describe optical data transmission systems using homogeneous, single-mode, multi-core fibers (MCFs). We first briefly discuss space-division multiplexing (SDM) fibers, observing that no individual SDM fiber offers overwhelming advantages over bundles of single-mode fiber (SMF) across all transmission regimes. We note that for early adoption of SDM fibers, uncoupled or weakly coupled fibers which are compatible with existing SDM infrastructure have a practical advantage. Yet, to be more attractive than parallel SMF, it is also necessary to demonstrate benefits beyond improved spatial spectral efficiency. It is hoped that the lower spread of propagation delays (skew) between spatial channels in some fibers can be exploited for improved performance and greater efficiency from hardware sharing and joint processing. However, whether these benefits can be practically harnessed and outweigh impairments or effort to mitigate cross talk between spatial channels is not yet clear. Hence, focusing on homogeneous MCFs, we first describe measurements and simulations on the impact of inter-core cross talk in such fibers before reporting experimental investigation into the spatial channel skew variation with a series of the experimental results including a comparison with SMF in varying environmental conditions. Finally, we present some system and transmission experiments using parallel recirculating loops that enable demonstration of both multi-dimensional modulation and joint digital processing techniques across three MCF cores. Both techniques lead to increased transmission reach but highlight the need for further experimental analysis to properly characterize the potential benefits of correlated propagation delays in such fibers. [ABSTRACT FROM AUTHOR]

Space division multiplexing (SDM) is mainly seen as a means to increase data throughput and handle exponential traffic growth in future optical networks. But its role is certainly more diverse. Research on SDM encourages device integration, brings newfunctionality to network elements, and helps optical networks to evolve. As a result, the number of individual components in future networks will decrease, which in turn will improve overall network reliability and reduce power consumption as well as operational expenditure. After reviewing the state-of-the-art in SDMfiber research and development with a particular focus on weakly coupled single-mode multi-core fibers, we take a look beyond the capabilities of SDM as a means of boosting transmission capacity and discuss ideas and concepts on howto exploit the spatial dimension for improved efficiency and resource sharing in optical networks. [ABSTRACT FROM PUBLISHER]

We describe the design and characterization of a heterogeneous 36-core, three-mode fiber with three core types. Intercore crosstalk for LP11 modes is estimated to be below −31 dB for 5.5 km propagation at a core pitch of 34 μm. Feasibility of 108 space/mode division multiplexed transmission is investigated using free-space multiplexing/demultiplexing technologies, 40-wavelength division multiplexed, 25 GBd, 93.4-Gb/s dual-polarization QPSK signals, and coherent detection with a sparse 6 × 6 MIMO equalizer. The total transmission capacity amount to 403.7 Tb/s. [ABSTRACT FROM PUBLISHER]

In this letter, we report on coupling optics for connecting single-core single-mode fibers with multicore single-mode fibers. After a brief discussion of the options for such coupling systems, we describe our approach of using bulk optics to fabricate low-loss and low-crosstalk devices for both 7- and 19-core multicore fibers with the free-space design approach. This enables the use of the same coupling device with a variety of multicore fibers whose structural parameters differ from one sample to another. We present the results of experimental evaluations of these devices, discuss various causes of insertion loss, and analyze the coupling loss in detail. [ABSTRACT FROM PUBLISHER]