Search

We report on the design and performance of the Bicep3 instrument and its first three-year data set collected from 2016 to 2018. Bicep3 is a 52 cm aperture refracting telescope designed to observe the polarization of the cosmic microwave background (CMB) on degree angular scales at 95 GHz. It started science observation at the South Pole in 2016 with 2400 antenna-coupled transition-edge sensor bolometers. The receiver first demonstrated new technologies such as large-diameter alumina optics, Zotefoam infrared filters, and flux-activated SQUIDs, allowing ∼10× higher optical throughput compared to the Keck design. Bicep3 achieved instrument noise equivalent temperatures of 9.2, 6.8, and 7.1 μ K CMB s and reached Stokes Q and U map depths of 5.9, 4.4, and 4.4 μK arcmin in 2016, 2017, and 2018, respectively. The combined three-year data set achieved a polarization map depth of 2.8 μK arcmin over an effective area of 585 square degrees, which is the deepest CMB polarization map made to date at 95 GHz.

The BICEP3 CMB Polarimeter is a small-aperture refracting telescope located at the South Pole and is specifically designed to search for the possible signature of inflationary gravitational waves in the Cosmic Microwave Background (CMB). The experiment measures polarization on the sky by differencing the signal of co-located, orthogonally polarized antennas coupled to Transition Edge Sensor (TES) detectors. We present precise measurements of the absolute polarization response angles and polarization efficiencies for nearly all of BICEP3s $\sim800$ functioning polarization-sensitive detector pairs from calibration data taken in January 2018. Using a Rotating Polarized Source (RPS), we mapped polarization response for each detector over a full 360 degrees of source rotation and at multiple telescope boresight rotations from which per-pair polarization properties were estimated. In future work, these results will be used to constrain signals predicted by exotic physical models such as Cosmic Birefringence., Comment: Proceedings submitted to SPIE 2020 (AS111). 12 pages, 5 figures, 2 tables

We present the design and characterization of a ground-based absolute polarization angle calibrator accurate to better than 0.1° for use with polarization sensitive cosmic microwave background (CMB) experiments. The calibrator's accuracy requirement is driven by the need to reduce upper limits on cosmic polarization rotation, which is expected to be zero in a large class of cosmological models. Cosmic polarization effects such as cosmic birefringence and primordial magnetic fields can generate spurious B-modes that result in non-zero CMB TB and EB correlations that are degenerate with a misalignment of detector orientation. Common polarized astrophysical sources used for absolute polarization angle calibration have not been characterized to better than 0.5°. Higher accuracy can be achieved through self-calibration methods, however these are subject to astrophysical foreground contamination and inherently assume the absence of effects like cosmic polarization rotation. The deficiencies in these two calibration methods highlight the need for a well characterized polarized source. The calibrator we present utilizes a 76 GHz Gunn oscillator coupled to a frequency doubler, pyramidal horn antenna, and co-rotating wire-grid polarizer. A blackened optics tube was built around the source in order to mitigate stray reflections, attached to a motor-driven rotation stage, then mounted in a blackened aluminum enclosure for further reflection mitigation and robust weatherproofing. We use an accurate bubble level in combination with four precision-grade aluminum planes located within the enclosure to calibrate the source's linear polarization plane with respect to the local gravity vector to better than the 0.1° goal. In 2017 the calibrator was deployed for an engineering test run on the POLARBEAR CMB experiment located in Chile's Atacama Desert and is being upgraded for calibration of the POLARBEAR-2b receiver in 2018. In the following work we present a detailed overview of the calibrator design, systematic control, characterization, deployment, and plans for future CMB experiment absolute polarization calibration.

BICEP Array is the newest multi-frequency instrument in the BICEP/Keck Array program. It is comprised of four 550 mm aperture refractive telescopes observing the polarization of the cosmic microwave background (CMB) at 30/40, 95, 150 and 220/270 GHz with over 30,000 detectors. We present an overview of the receiver, detailing the optics, thermal, mechanical, and magnetic shielding design. BICEP Array follows BICEP3's modular focal plane concept, and upgrades to 6" wafer to reduce fabrication with higher detector count per module. The first receiver at 30/40 GHz is expected to start observing at the South Pole during the 2019-20 season. By the end of the planned BICEP Array program, we project $\sigma(r) \sim 0.003$, assuming current modeling of polarized Galactic foreground and depending on the level of delensing that can be achieved with higher resolution maps from the South Pole Telescope., Comment: 15 pages, 13 figures

We present the design and characterization of a ground-based absolute polarization angle calibrator accurate to better than 0.1 degrees for use with polarization sensitive cosmic microwave background (CMB) experiments. The calibrator's accuracy requirement is driven by the need to reduce upper limits on cosmic polarization rotation, which is expected to be zero in a large class of cosmological models. Cosmic polarization effects such as cosmic birefringence and primordial magnetic fields can generate spurious B-modes that result in non-zero CMB TB and EB correlations that are degenerate with a misalignment of detector orientation. Common polarized astrophysical sources used for absolute polarization angle calibration have not been characterized to better than 0.5 degrees. Higher accuracy can be achieved through self-calibration methods, however these are subject to astrophysical foreground contamination and inherently assume the absence of effects like cosmic polarization rotation. The deficiencies in these two calibration methods highlight the need for a well characterized polarized source. The calibrator we present utilizes a 76 GHz Gunn oscillator coupled to a frequency doubler, pyramidal horn antenna, and co-rotating wire-grid polarizer. We use an accurate bubble level in combination with four precision-grade aluminum planes located within the enclosure to calibrate the source's linear polarization plane with respect to the local gravity vector to better than the 0.1 degree goal. In 2017 the calibrator was deployed for an engineering test run on the POLARBEAR CMB experiment located in Chile's Atacama Desert and is being upgraded for calibration of the POLARBEAR-2b receiver in 2018. In the following work we present a detailed overview of the calibrator design, systematic control, characterization, deployment, and plans for future CMB experiment absolute polarization calibration., Comment: 15 pages, 7 figures, 2 tables, SPIE conference Austin 2018

POLARBEAR-2 (PB-2) is a cosmic microwave background (CMB) polarization experiment that will be located in the Atacama highland in Chile at an altitude of 5200 m. Its science goals are to measure the CMB polarization signals originating from both primordial gravitational waves and weak lensing. PB-2 is designed to measure the tensor to scalar ratio, r, with precision {\sigma}(r) < 0.01, and the sum of neutrino masses, {\Sigma}m{\nu}, with {\sigma}({\Sigma}m{\nu}) < 90 meV. To achieve these goals, PB-2 will employ 7588 transition-edge sensor bolometers at 95 GHz and 150 GHz, which will be operated at the base temperature of 250 mK. Science observations will begin in 2017., Comment: 9pages,8figures

BICEP3, the latest telescope in the BICEP/Keck program, started science observations in March 2016. It is a 550mm aperture refractive telescope observing the polarization of the cosmic microwave background at 95 GHz. We show the focal plane design and detector performance, including spectral response, optical efficiency and preliminary sensitivity of the upgraded BICEP3. We demonstrate 9.72$\mu$K$\sqrt{\textrm{s}}$ noise performance of the BICEP3 receiver., Comment: 11 pages, 10 figures. To be published in Proc. SPIE. Presented at SPIE Astronomical Telescopes and Instrumentation Conference 9914: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VIII, June 2016

The Keck Array (SPUD) began observing the cosmic microwave background's polarization in the winter of 2011 at the South Pole. The Keck Array follows the success of the predecessor experiments Bicep and Bicep2, using five on-axis refracting telescopes. These have a combined imaging array of 2500 antenna-coupled TES bolometers read with a SQUID-based time domain multiplexing system. We will discuss the detector noise and the optimization of the readout. The achieved sensitivity of the Keck Array is 11.5 {\mu}K_(CMB)*sqrt{s} in the 2012 configuration., Comment: Presented at SPIE 2012 Astronomical Telescopes and Instrumentation Conference. Will be published in the proceedings

The Keck Array (SPUD) is a set of microwave polarimeters that observes from the South Pole at degree angular scales in search of a signature of Inflation imprinted as B-mode polarization in the Cosmic Microwave Background (CMB). The first three Keck Array receivers were deployed during the 2010-2011 Austral summer, followed by two new receivers in the 2011-2012 summer season, completing the full five-receiver array. All five receivers are currently observing at 150 GHz. The Keck Array employs the field-proven BICEP/BICEP2 strategy of using small, cold, on-axis refractive optics, providing excellent control of systematics while maintaining a large field of view. This design allows for full characterization of far-field optical performance using microwave sources on the ground. We describe our efforts to characterize the main beam shape and beam shape mismatch between co-located orthogonally-polarized detector pairs, and discuss the implications of measured differential beam parameters on temperature to polarization leakage in CMB analysis., Comment: 13 pages, 11 figures, Proceedings of the SPIE, Vol 8452: Millimeter, Submillimeter and Far-Infrared Detectors and Instrumentation for Astronomy VI, July 2012

Bicep2 deployed to the South Pole during the 2009-2010 austral summer, and is now mapping the polarization of the cosmic microwave background (CMB), searching for evidence of inflationary cosmology. Bicep2 belongs to a new class of telescopes including Keck (ground-based) and Spider (balloon-borne) that follow on Bicep's strategy of employing small, cold, on-axis refracting optics. This common design provides key advantages ideal for targeting the polarization signature from inflation, including: (i) A large field of view, allowing substantial light collecting power despite the small aperture, while still resolving the degree-scale polarization of the CMB; (ii) liquid helium-cooled optics and cold stop, allowing for low, stable instrument loading; (iii) the ability to rotate the entire telescope about the boresight; (iv) a baffled primary aperture, reducing sidelobe pickup; and (v) the ability to characterize the far field optical performance of the telescope using ground-based sources. We describe the last of these advantages in detail, including our efforts to measure the main beam shape, beammatch between orthogonally-polarized pairs, polarization efficiency and response angle, sidelobe pickup, and ghost imaging. We do so with ground-based polarized microwave sources mounted in the far field as well as with astronomical calibrators. Ultimately, Bicep2's sensitivity to CMB polarization from inflation will rely on precise calibration of these beam features.

BICEP2/Keck and SPIDER are cosmic microwave background (CMB) polarimeters targeting the B-mode polarization induced by primordial gravitational waves from inflation. They will be using planar arrays of polarization sensitive antenna-coupled TES bolometers, operating at frequencies between 90 GHz and 220 GHz. At 150 GHz each array consists of 64 polarimeters and four of these arrays are assembled together to make a focal plane, for a total of 256 dual-polarization elements (512 TES sensors). The detector arrays are integrated with a time-domain SQUID multiplexer developed at NIST and read out using the multi-channels electronics (MCE) developed at the University of British Columbia. Following our progress in improving detector parameters uniformity across the arrays and fabrication yield, our main effort has focused on improving detector arrays optical and noise performances, in order to produce science grade focal planes achieving target sensitivities. We report on changes in detector design implemented to optimize such performances and following focal plane arrays characterization. BICEP2 has deployed a first 150 GHz science grade focal plane to the South Pole in December 2009., Comment: 10 pages, 7 figures; SPIE proceedings for Millimeter, Submillimeter and Far-Infrared Detectors and Instrumentation for Astronomy V (Conference 7741, June 2010, San Diego, CA, USA)

The Keck Array is a cosmic microwave background (CMB) polarimeter that will begin observing from the South Pole in late 2010. The initial deployment will consist of three telescopes similar to BICEP2 housed in ultra-compact, pulse tube cooled cryostats. Two more receivers will be added the following year. In these proceedings we report on the design and performance of the Keck cryostat. We also report some initial results on the performance of antenna-coupled TES detectors operating in the presence of a pulse tube. We find that the performance of the detectors is not seriously impacted by the replacement of BICEP2's liquid helium cryostat with a pulse tube cooled cryostat., 8 pages, 6 figures; SPIE proceedings for Millimeter, Submillimeter and Far-Infrared Detectors and Instrumentation for Astronomy V (Conference 7741, June 2010, San Diego, CA, USA)