Search

The BeiDou Global Satellite Navigation System (BDS-3) broadcast newly developed B1C and B2a signals. To provide a better service for global users, the vertical phase center offset (PCO) and phase center variation (PCV) are estimated for the B1C/B2a ionospheric-free linear combination of the BDS-3 inclined geostationary orbit (IGSO) and medium earth orbit (MEO) satellites in this study. And considering the traditional PCC estimation method needs two Precise orbit determination (POD) processing, based on the correlation between PCO z-offset and PCV, the theoretical analysis and experimental comparison have been made to discuss whether the POD procedure for the PCO estimation can be omitted. The estimated z-offset time series revealed the inadequacy of the solar radiation pressure (SRP) model for the IGSO satellites and the MEO satellites with Pseudo Random Noise code (PRN) C45 and C46. The PCVraws estimated by the traditional method and the PCO estimation omitted method have the same characteristic. The final PCO z-offsets and PCVs calculated by the two schemes agreed very well with differences can be harmlessly ignored, which confirmed that the PCO estimation can be safely omitted to save computation time. The PCC model proposed in this study has been compared with the Test and Assessment Research Center of China Satellite Navigation Office (TARC/CSNO) released model, the qualities of the orbits and BDS-only precise point positioning (PPP) solutions of the new model both show improvements, except for the IGSO orbits. The analysis of the IGSO orbits further verifies the SRP model is not suitable for the IGSO satellites. [ABSTRACT FROM AUTHOR]

Satellite antenna phase center offsets (PCOs) and phase variations (PVs) for BeiDou-3 satellites are estimated based on the tracking data of the Multi-GNSS Experiment (MGEX) and the international GNSS Monitoring and Assessment System (iGMAS) network. However, when estimating the (PCOs) of BeiDou-3 medium Earth orbit (MEO) satellites by pure Extending the CODE Orbit Model (ECOM1), the x-offset estimations of the PCOs have a systematic variation of about 0.4 m with the elevation of the Sun above the orbital plane (β-angle). Thus, a priori box-wing solar radiation pressure (SRP) model of BeiDou-3 MEO was assisted with ECOM1. Then, the satellite type-specific PCOs and common PVs were obtained. The estimations of PCOs and PVs were compared with the MGEX PCOs from the precise orbit and clock offset. When the MGEX PCOs were used, the root mean square (RMS) of 24 h overlap was 6.76, 4.36, 1.46 cm, in along-track, cross-track, and radial directions, respectively; the RMS and standard deviations (STD) of the 24 h clock offset overlap were 0.28 and 0.15 ns; the fitting RMS of the 72 h clock offset of the quadratic polynomial was 0.243 ns. After comparing this with the estimated PCOs and PVs, the RMS of the 24 h orbit overlap was decreased by 6.5 mm (10.54%), 1.8 mm (4.4%), and 1.1 mm (8.03%) in the along-track, cross-track, and radial directions, respectively; the RMS and STD of the 24 h clock offset overlap were decreased by 0.024 ns (8.6%) and 0.020 ns (13.1%), respectively; the fitting RMS of the 72 h clock offset of the quadratic polynomial was reduced by about 0.016 ns (6.5%). [ABSTRACT FROM AUTHOR]

Due to the cuboid satellite body of BeiDou-3 satellites, the accuracy of their orbit showed a trend of systematic variation with the sun-satellite-earth angle (ε) using the Extend CODE Orbit Model (ECOM1). Therefore, an a priori cuboid box-wing model (named the cuboid model) is necessary to compensate ECOM1. Considering that the body-dimensions and optical properties of the BeiDou-3 satellites used to construct the box-wing model have not yet been fully released, the adjustable box-wing model (ABW) was used for precise orbit determination (POD). The a priori cuboid box-wing model was directly estimated by the precision radiation accelerations, obtained from ABW POD. When using ECOM1 model, for 14 < β < 40°, a linear systematic variation of D0 related to the elevation of the sun above the orbital plane (β-angle) with a slope of 0.048 nm/s2/°, was found for C30. After adding the cuboid model to assist ECOM1 (named Cuboid + ECOM1), the slope was reduced to 0.005 nm/s2/°, and for C20 satellite, the standard deviation (STD) of D0 was improved, from 1.28 to 0.85 nm/s2 (34%). For satellite laser ranging (SLR) validation, when using the ECOM1 model, the systematic variation with the ε angle was about 14 cm for C20 and C30. After using the Cuboid + ECOM1 model, the variation was significantly reduced to about 5 cm. For C20 and C21, compared with the ECOM1 model, the root mean square (RMS) of the ECOM2 and Cuboid + ECOM1 model was improved by about 0.54 (10.3%) and 0.43 cm (8.7%). For C29 and C30, the RMS of ECOM2 and Cuboid + ECOM1 model was improved for about 0.7 (10.9%) and 1.6 cm (25.6%). Finally, the RMS of the SLR residuals of 4.37 to 4.88 cm was achieved for BeiDou-3 POD. [ABSTRACT FROM AUTHOR]