Search

Gossan discarded from mining processes result in metal resource wastage, and its long-term stacking causes environmental hazards. Therefore, this article considers zinc-containing gossan as the research object. The ore was roasted to prepare primary zinc ferrite products and sulfuric acid leaching was performed for purification. Then, XRD analysis was performed to characterize the purified products. The results indicated that the effect of sulfuric acid concentration on the purification of the products was related to its zinc ferrite content. Furthermore, the effect of leaching temperature on the purification of zinc ferrite products was related to sulfuric acid concentration; the lower the sulfuric acid concentration, the more considerable the effect of leaching temperature. The conditions suitable for purifying the products through sulfuric acid leaching are as follows: sulfuric acid concentration of 140 g/L, liquid–solid ratio of 4:1, leaching temperature of 80 °C, leaching time of 120 min, and stirring speed of 300 rpm. This article determines the factors affecting the purification of zinc ferrite by sulfuric acid leaching along with the optimal purification conditions. The findings presented herein provide a theoretical foundation for the development of new processes for preparing zinc ferrite, which has considerable industrial application value. [ABSTRACT FROM AUTHOR]

Gossan ore is typically abandoned after mining, which not only increases mining production costs but also wastes mineral resources, and its long-term accumulation can easily lead to environmental pollution hazards. Therefore, this paper takes zinc-containing gossan ore as the research object and, based on the high content of zinc and iron minerals in gossan ore, this study conducts a roasting experiment to prepare ZnFeO4. X-ray diffraction is used to characterize and analyze the ZnFeO4 sample prepared by roasting zinc-containing gossan ore. The experimental results indicate that controlling the particle size of the roasted ore sample to −0.074 mm can effectively remove impurities and facilitate the reaction. The influence of roasting temperature and time on the formation of ZnFeO4 is remarkable. The conditions for roasting zinc-containing gossan ore to maximize the ZnFeO4 content are as follows: −0.074 mm particle size ore sample, reaction zinc/iron molar ratio of 1:2, mechanical activation time of 120 min, roasting temperature of 1050 °C, and roasting time of 120 min. These findings provide new ideas for the utilization of gossan ore and lay a theoretical foundation for the efficient development and utilization of difficult-to-select zinc-containing gossan ore. [ABSTRACT FROM AUTHOR]

Based on the JK Drop Weight test and principle of selective crushing, a multicomponent complex ore with its component minerals, i.e., pyrrhotite, sphalerite, and quartz, was used to explore the impact crushing characteristics and relationship between the complex ore and its component minerals. Results show that the order of impact crushing resistance is quartz > pyrrhotite > ore > sphalerite. The particle-size-distribution characteristic curve of ore crushing products is always "sandwiched" between the curves of pyrrhotite, sphalerite, and quartz within the same feed-size range. When the particle size is −63 + 53, −45 + 37.5, −31.5 + 26.5, and −22.4 + 19 mm, the component mineral pyrrhotite has a negative effect on the impact crushing of ore, while the component mineral sphalerite has a positive effect. When the particle size is −16 + 13.2 mm, the component mineral pyrrhotite has a positive effect on the crushing effect of the ore, while the component mineral sphalerite has a negative effect. The component mineral quartz always has a negative effect on the impact crushing effect of ore in all the studied particle sizes. [ABSTRACT FROM AUTHOR]

Based on batch grinding method and normalization idea, a conical ball mill is used and a quantitative separation method of grinding characteristics of multi-component complex ore is proposed. The results show that the feed sizes of polymetallic complex ore have an obvious influence on the particle size distribution of intermediate grinding products in the early stage of grinding. However, the influence of the feed size is relatively insignificant on the particle size distribution of intermediate grinding products in the middle and late grinding stages. The grinding product t10 is negatively correlated with the feed sizes of ore when the grinding force is applied to the ore. At the same time, it has a simple positive linear relationship with the grinding time. The contribution rates of component minerals pyrrhotite, sphalerite and quartz to the grinding characteristics of the ore are 28.64%~37.74%, 39.93%~51.84%, 16.07%~28.39%, respectively. Therefore, the order of contribution of component minerals to the grinding characteristics of ore is sphalerite > pyrrhotite > quartz. The results provide new insights for the subsequent study of grinding characteristics of multi-component complex ores. [ABSTRACT FROM AUTHOR]

The relationship between the grinding characteristics of polymetallic complex ore and its component minerals, pyrrhotite, sphalerite, and quartz, under the action of abrasion was studied, based on batch grinding experiments and theoretical analysis methods of selective grinding. The results show that when the polymetallic complex ore was subjected to the action of abrasion, the crushing effect of ore was enhanced by the existence of sphalerite, that is, sphalerite plays a positive role in the crushing effect of ore. The crushing effect of ore was reduced by the existence of pyrrhotite and quartz, that is, pyrrhotite and quartz plays a negative role in the crushing effect of ore. In addition, the sphalerite had a more prominent effect on the grinding characteristics of the ore. The grinding speed of ore and its component minerals decreased exponentially with the grinding time, and the instantaneous grinding speed of 0 min was negatively correlated with the feed sizes. The rapidly decreasing trend of the grinding speed reached the threshold when the grinding time reached 4 min. The results can provide some theoretical guidance for the study of grinding characteristics of multi-component complex ores in subsequent grinding process. [ABSTRACT FROM AUTHOR]

The particle size composition of grinding products will significantly affect the technical and economic indexes of subsequent separation operations. The polymetallic complex ores from Tongkeng and Gaofeng are selected as the research object in this paper. Through the JK drop-weight test, the batch grinding test, and the population-balance kinetic model of grinding with the Simulink platform, the grinding characteristics of the two types of ores and the particle-size-composition prediction methods of grinding products are studied. The results show that the impact-crushing capacity of Tongkeng ore and Gaofeng ore are "medium" grade and "soft" grade, respectively. The crushing resistance of Tongkeng ore increases with the decrease in particle size, and the crushing effect is more easily affected by particle size than that of Gaofeng ore. For the same ore, the accuracy order of the three methods is: PSO–BP method > JK drop-weight method > BIII method. For the same method, only the BIII method has higher accuracy in predicting Gaofeng ore than Tongkeng ore, and other methods have better accuracy in predicting Tongkeng ore than Gaofeng ore. The prediction accuracy of the BIII method is inferior to that of the JK drop-weight method and the PSO–BP method and is easily affected by the difference in mineral properties. The PSO–BP method has a high prediction accuracy and fast model operation speed, but the accuracy and speed of the iterative results are easily affected by parameters such as algorithm program weight and threshold. The parameter-solving process of each prediction method is based on different simplifications and assumptions. Therefore, appropriate hypothetical theoretical models should be selected according to different ore properties for practical application. [ABSTRACT FROM AUTHOR]

Grinding plays an important role in mining, construction, metallurgy, chemical, coal and other basic industries. In terms of beneficiation, grinding is the most energy consuming operation. So, reasonable grinding conditions according to the properties of ores is the key to obtain good grinding results and reduce energy consumption and resource waste. In this paper, Tongkeng and Gaofeng polymetallic complex ores are taken as research objects, and the effects of grinding law based on single factor condition test and the grinding parameters optimization based on response surface method were studied for two kinds of ores. The results show that grinding time is a significant factor affecting the particle size composition. The suitable grinding concentration of Tongkeng ore and Gaofeng ore is 70% and 75%, respectively. The effect of mill filling ratio on Gaofeng ore is not obvious. The rotational rate has little effect on the grinding technical efficiency. The regression model equations obtained by response surface method are extremely significant, and the relative errors of prediction are all within 1%, indicating high reliability of fitting equations. The order of influencing factors of the two ores is as follows: grinding time > filling ratio > grinding concentration. For Tongkeng ore, the optimized grinding conditions are grinding time 5.4 min, grinding concentration 67% and filling ratio 35%. For Gaofeng ore, the optimized grinding conditions are grinding time 3.8 min, grinding concentration 73% and filling ratio 34%. [ABSTRACT FROM AUTHOR]

Semi-autogenous (SAG) mills are widely used grinding equipment, but some ore with critical particle sizes cannot be effectively processed by SAG mills and turned into pebbles. This research aims to analyze and compare the properties of raw ore and pebbles from a zinc- and tin-bearing ore. The results show that the contents of sphalerite, cassiterite, biotite, antigorite, pyroxferroite, ferroactinolite, and ilvaite in the raw ore are higher than those in the pebbles, and that the pebbles have higher contents of hedenbergite, chlorite, epidote, actinolite, etc. Meanwhile, the abrasion and impact resistance of pebbles is greater than that of the raw ore. In addition, the sphalerite is evenly embedded, and the grinding process is regular. Fine cassiterite associated with harder minerals is difficult to dissociate; it is often found in softer or brittle minerals which may be easily ground into ore mud. The cassiterite in the pebbles is associated with hard and brittle hedenbergite and soft chlorite, making it difficult to recover. This research provides a good foundation for evaluating the recovery value of pebbles and improving the productivity of the SAG process. [ABSTRACT FROM AUTHOR]

We investigated the influence of microwave and conventional heating pretreatments on the grinding of cassiterite associated with pollimetallic ore. The minerals that exhibited a stronger microwave absorption ability crushed first, which is the main difference between the microwave and the traditional heating pretreatments. The distribution of Fe, Pb, Zn, and Sn increased in the fine size range (−0.425 mm). The Fe and Pb grades in the size ranges of −3.2 + 2 mm and −2 + 1 mm after the microwave pretreatment (6 kW, 1 min) were lower than those of the traditional heating (12 kW, 400 °C, 20 min), indicating that the microwave selective heating was beneficial for pyrite and jamesonite. The grade and distribution of Sn decreased significantly in the size ranges of −3.2 + 2 mm and −2 + 1 mm and increased in the size ranges of −0.425 + 0.15 mm and −0.15 + 0.074 mm. Microwave heating treatment promoted the grinding of sulfide ore and reduced the cassiterite overgrinding. [ABSTRACT FROM AUTHOR]

Due to the differences in beneficiation methods and mineral properties between cassiterite ore and polymetallic sulfide ore, there is an inherent contradiction between cassiterite overgrinding and sulfide ore undergrinding. A method to optimize and characterize the grinding performance is presented in this paper. In this method, the grinding characteristics are defined by the qualified particle size range index under unit energy consumption. By changing the grinding time, grinding concentration, and filling ratio, the optimized grinding conditions were evaluated, and they were predicted and verified by the response surface method. The results corroborate that when the grinding time of cassiterite is 4 min and the grinding time of sulfide ore is 8 min, the grinding qualified size range index under unit energy consumption is the largest. Cassiterite is brittle and easy to grind due to low hardness, while sulfide is difficult to grind due to high hardness. Hence, the time to beneficiate tin ore is when the grinding time is 4 min, and that to beneficiate sulfide ore is when the regrinding time is approximately 4 min. In this way, the contradiction between overgrinding cassiterite and undergrinding sulfide ore can be alleviated on the basis of the most effective utilization of grinding energy. The optimal grinding concentration and filling ratio are 65% and 37%, respectively. The response surface prediction and test results are almost identical, with an error of ±2%. Thus, the effectiveness of grinding characterization method is verified. [ABSTRACT FROM AUTHOR]