Search

Akhil K Mohan,1,2 Minsa M,3 T R Santhosh Kumar,3 G S Vinod Kumar1 1Nano Drug Delivery Systems (NDDS), Cancer Biology Division, Rajiv Gandhi Centre for Biotechnology, Thiruvananthapuram, Kerala, 695014, India; 2Research Centre, Department of Biotechnology, University of Kerala, Thiruvananthapuram, Kerala, India; 3Cancer Research Programme-1, Bio-Innovation Center (BIC), Rajiv Gandhi Centre for Biotechnology, Thiruvananthapuram, Kerala, 695014, IndiaCorrespondence: G S Vinod Kumar, Tel +91 471 2781217, Fax +91 471 2348096, Email gsvinod@rgcb.res.inPurpose: Peptide-based therapy is a promising strategy for cancer treatment because of its low drug resistance. However, the major challenge is their inability to target cancer cells specifically. So, a targeted nano-delivery system that could deliver therapeutic peptides selectively to cancer cells to stimulate their action is highly desirable. This study aims to deliver the antitumor peptide, Pep5, to breast tumor cells selectively using a targeting peptide functionalised multi-layered PLGA-PEI nanoparticles.Methods: In this study, Pep5 entrapped PLGA-PEI (Pep5-PPN) dual layered nanoparticles were developed. These nanoparticles were decorated with TKD (Pep5-TPPN) on their surface for site-specific delivery of Pep5 to breast tumor cells. The particles were then characterized using various instrumental analyses. In vitro cytotoxicity of the particles was evaluated in estrogen receptor positive (ER+ve) and triple negative breast cancer (TNBC) cells. An ex vivo tumor spheroid model was used to analyze the antitumor activity of the particles.Results: Uniformly round Pep5-TPPN particles were synthesized with an average diameter of 420.8 ± 14.72 nm. The conjugation of PEI over Pep5-PLGA nanoparticles shifted the zeta potential from − 11.6 ± 2.16 mV to +20.01 ± 2.97 mV. In vitro cytotoxicity analysis proved that TKD conjugation to nanoparticles enhanced the antitumor activity of Pep5 in tested breast cancer cells. Pep5-TPPN induced cytoskeletal damage and apoptosis in the tested cells, which showed that the mechanism of action of Pep5 is conserved but potentiated. Active targeting of Pep5 suppressed the tumor growth in ex vivo spheroid models.Conclusion: A multi-layered nanoparticle functionalized with dual peptide was fabricated for active tumor targeting, which stimulated Pep5 activity to reduce the tumor growth in vitro and ex vivo.Graphical Abstract: Keywords: peptide, Pep 5, tumor, cancer, breast

Teena Jacob Chirayil,1,2 G S Vinod Kumar1 1Nano Drug Delivery Systems (NDDS), Cancer Biology Division, Rajiv Gandhi Centre for Biotechnology, Thiruvananthapuram, Kerala, India; 2Research Scholar, Department of Biotechnology, University of Kerala, Thiruvananthapuram, Kerala, IndiaCorrespondence: G S Vinod Kumar, Tel +91 471 2781217, Email gsvinod@rgcb.res.inPurpose: This study aimed to design a prototypic drug delivery system (DDS) made of an amphiphilic, pullulan (Pull)-derived biodegradable polymer for targeting the asialoglycoprotein receptor (ASGPR) overexpressed in HCC. Stearic acid (SA) was conjugated to increase the hydrophobicity of pullulan (Pull-SA).Methods: Pullulan (Pull) was linked to stearic acid (SA) after functional group modifications via EDC/NHS chemistry and characterized. Sorafenib tosylate (SRFT) was entrapped in pullulan–stearic acid nanoparticles (Pull-SA-SRFT) and its particle size, zeta potential, entrapment efficiency (EE), loading capacity (LC), and release efficiency was measured. The competence of Pull-SA-SRFT over SRFT in vitro was assessed using the ASGPR over-expressing PLC/PRF/5 hepatocellular carcinoma (HCC) cell line. This was done by studying cytotoxicity by MTT assay and chromosome condensation assay, early apoptosis by annexin-Pi staining, and late apoptosis by live–dead assay. The cellular uptake study was performed by incorporating coumarin-6 (C6) fluorophore in place of SRFT in Pull-SA conjugates. A biodistribution study was conducted in Swiss-albino mice to assess the biocompatibility and targeting properties of SRFT and Pull-SA-SRFT to the liver and other organs at 1, 6, 24, and 48 h.Results: The characterization studies of the copolymer confirmed the successful conjugation of Pull-SA. The self-assembled amphiphilic nanocarrier could proficiently entrap the hydrophobic drug SRFT to obtain an entrapment efficiency of 95.6% (Pull-SA-SRFT). Characterization of the synthesized nanoparticles exhibited highly desirable nanoparticle characteristics. In vitro, apoptotic studies urged that Pull-SA-SRFT nanoparticle was delivered more efficiently to HCC than SRFT. The cellular uptake study performed, gave propitious results in 4 hrs. The biodistribution study conducted in immunocompetent mice suggested that Pull-SA-SRFT was delivered more than SRFT to the liver when compared to other organs, and that the system was biocompatible.Conclusion: Pull-SA-SRFT is a promisingly safe, biodegradable, cell-specific nanocarrier and a potential candidate to target hydrophobic drugs to HCC.Graphical Abstract: Keywords: pullulan stearic acid nanoparticles, hepatocellular carcinoma, drug delivery system

Background Treatment of wounds with the help of nanoparticles (NPs) is more effective and superior in comparison to traditional wound healing methods as it protects and sustains active drug release at the wound site thus enhancing the safety of the drug and reducing the possibility of side effects. The advantages of this method are the possibility of allowing a reduction in administered dose, limiting toxicity levels to the minimum, and increasing safety of topical delivery of the drug. Materials and methods We report the synthesis of a novel poly (lactic-co-glycolic acid) (PLGA) NP-based multicargo delivery system for growth factors and antimicrobial peptide. Growth factors vascular endothelial growth factor (VEGF) and basic fibroblast growth factor (bFGF) were entrapped in PLGA NPs by solvent diffusion method and an antimicrobial peptide (K4) was conjugated to the NP by carbodiimide chemistry. The developed multiple cargo delivery systems with growth factors (VEGF and bFGF) and an antimicrobial peptide (K4) were investigated and optimized for potential wound healing. Results The system showed a sustained release of growth factors and was evaluated for cytotoxicity by MTT and live/dead assay, which revealed that the bioactivity of the growth factor-entrapped NPs was higher than that of free growth factors, and it also induced enhanced cell proliferation in vitro. Conclusion The development of a system for the codelivery of growth factors (VEGF and bFGF) and an antimicrobial peptide (K4) was investigated for potential wound healing application. The entrapment of growth factors with very high efficiency is an advantage in this method along with its sustained release from the nanoparticulate system, which will enhance the angiogenesis. Our system also displayed broad-spectrum antimicrobial activity against both gram-positive and gram-negative bacteria.

Synthesis and evaluation of poly(ethylene glycol) grafted poly(O-benzyl ether) dendrimers for polymer assisted organic reaction is presented here. Initially a cross-linked polymer Polystyrene-Poly(ethyleneglycol)dimethacrylate-Vinylbenzylchloride (PS-PEGDMA-VBC) was synthesized by radical suspension polymerization. 1,3,5-tris(hydroxymethyl)benzene dendron was prepared by the reduction of trimesic acid using LiAlH 4 . Dendrimers were generated on 2 mol% cross-linked resin by repetitive Williamson etherification and thionyl chloride reactions. The dendrimer was cleanly and efficiently prepared up to third generations (G 3 ) and each stage of reaction was quantitatively and qualitatively analyzed. Poly(ethylene glycol) having different chain lengths (400 Da and 1500 Da) were grafted to G 3 generation and tested for various physico-chemical properties. The utility of supports were checked by synthesizing linear as well as disulfide bonded endothelin peptides in high yield and purity by standard Fmoc method.

Poly(N,N-bisethylamine) dendrimers with high content of poly(ethylene glycol) were synthesized on 3-(Acryloyloxy)-2-hydroxypropylmethacrylate-crosslinked polystyrene (PS-AHMA) resin and tested in various conditions of solid phase peptide synthesis. The dendritic templates were generated to the second generation on cross-linker active site of 3-(Acryloyloxy)-2-hydroxypropylmethacrylate (AHMA). First generation dendrimer was designed by series of four-stage reactions, such as Schiff base incorporation, acidolytic cleavage, diazotization and thionyl chloride treatment and same synthetic routes were followed for second generation also. Poly(ethylene glycol) (PEG1000) has been grafted to second-generation dendrimer and used to check various physico-chemical parameters in Fmoc/Boc peptide synthetic conditions. The utility of PEGylated dendrimer support was demonstrated by synthesizing biologically potent linear as well as disulfide-bonded peptide by Fmoc method.

Poly(propyleneglycol)dimethacrylate cross-linked support using monomers Styrene and 4-chloromethyl styrene (PS-PPGDMA-VBC resin) was prepared by suspension polymerization method. Dendritic templates were synthesized from Schiff base and trimesic acid molecules and assembled independently on PS-PPGDMA-VBC support to the second generation. N,N-bischloro ethyl amine dendrimer was generated from Schiff base units and introduced to the chloromethyl groups uniquely through secondary amine. It was followed by acidolytic cleavage, diazotization and thionyl chloride reactions leading to first generation dendrimer. O-benzyl ether dendrimer was created using 1,3,5-tris(hydroxyl methyl)benzene unit which was produced by the LiAlH 4 reduction of carbonyl groups of trimesic acid molecule. The hydroxyl methyl groups formed were converted to chloro methyl groups by adding thionyl chloride that leads to first generation dendrimer. Similar synthetic routes were followed to produce second generation dendrimers too. Poly(ethylene glycol), M n ≈ 1500) has been grafted to chlorine termini of both dendrimers and used to check various physical and chemical properties of different peptide synthetic conditions. Reactions were qualitatively analyzed by FTIR, 13 C NMR, SEM and quantitatively analyzed by UV measurements and CHN analysis. Classically difficult ACP sequence was synthesized on both PEGylated dendrimer supports and compared to Tenta Gel. Biologically significant disulfide bonded endothelin class of peptides were also synthesized using novel supports using various literature reported methods.

G Deepa,1 Arun Kumar T Thulasidasan,2 Ruby John Anto,2 J Jisha Pillai,1 GS Vinod Kumar11Chemical Biology, 2Division of Cancer Research, Rajiv Gandhi Centre for Biotechnology, Thiruvananthapuram, Kerala, IndiaObjective: To investigate cross-linked hydrogels prepared via inverse emulsion polymerization to entrap poorly aqueous soluble drugs. Polyethylene glycol cross-linked acrylic polymers were synthesized and the loading and release of curcumin, a model hydrophobic drug, was investigated.Methods: Physicochemical characteristics of hydrogels were studied with 13C nuclear magnetic resonance, Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, differential scanning calorimetry, and swelling. Polymerization of the acrylic acid with cross-linked polyethylene glycol diacrylate was characterized with 13C nuclear magnetic resonance imaging and Fourier transform infrared spectroscopy.Results: The in vitro release rate of curcumin showed that there was a sustained release from the hydrogel with increased cross-linking; the release rate depended on the pH of the releasing medium. Intracellular and cytotoxicity studies were carried out in human cervical cancer cell lines.Conclusion: The results suggest cross-linked acrylic polymers can be used as efficient vectors for pH-sensitive, controlled delivery of hydrophobic drugs.Keywords: curcumin, cross-linked polyethylene glycol, polyacrylic acid, nanogel, cross-linking combinations, HeLa

The present study describes the synthesis of different mole densities of poly(propylene glycol)dimethacrylate cross-linked resins using monomer units such as styrene and 4-chloromethyl styrene and its evaluation as an ideal support toward different stages of solid-phase peptide synthesis. Free radical generated aqueous suspension polymerization has been followed for polymerization and the formation of resin was characterized using infrared and carbon-13 spectroscopic techniques. Surface morphology of resin was examined by scanning electron microscopy. The polymerization reaction was investigated with respect to the effect of amount of cross-linking agent to verify the swelling, loading, and the mechanical stability of resin. Solvent imbibition abilities in commonly used solvents were measured and compared to commercially available Merrifield as well as reported styrene-acryloyloxyhydroxypropyl methacrylate-tripropyleneglycol diacrylate (SAT resins. The chemical inertness of the support was also checked with different reagents used for solid-phase peptide synthesis. The suitability of support was demonstrated by synthesizing biologically potent Endothelin class of linear peptides by Fmoc strategy and compared to SAT resin. The purities of synthetic peptides were analyzed by high-performance liquid chromatography and corresponding masses by matrix-assisted laser desorption/ionisation-time of flight analysis. © 2011 Wiley Periodicals, Inc. Biopolymers (Pept Sci) 98: 239–248, 2012.

Effective delivery of drugs to alveoli in a controlled manner using hydrophobic polymers as carriers has already been reported. Preclinical studies revealed that toxicity and hydrophobicity are related to each other in pulmonary delivery. Here, we are reporting a chemically modified dextran having amphiphilicity and cationicity achieved by controlled grafting of stearyl amine. Two proportions of lipopolymers were synthesized and physico-chemical characterization was carried out. In vivo evaluation of sub-acute toxicity of the synthesized lipopolymer in Sprague–Dawley rats was carried out for three months. This was followed by a histological evaluation of the sacrificed animal’s lung. Further, the synthesized lipopolymer was formulated with drug (Rifampicin) loaded inhalable microparticles through spray drying. The final drug formulation was tested for toxicity and proinflammatory responses in human cell lines. Dose deposition efficiency of the formulation was determined using Anderson Cascade Impactor.

The encapsulation of 5-fluorouracil (5-FU) in hydrophobic polymeric materials is made feasible by a lipid-based prodrug approach. A lipid-5-FU conjugate of 5-FU with palmitic acid was synthesized in two-step process. A synthesized dipalmitoyl derivative (5-FUDIPAL) was characterized using Fourier transform infrared spectroscopy and (1)H-nuclear magnetic resonance. The 5-FUDIPAL was encapsulated in polyester-based polymers by the double emulsion-solvent evaporation method. The nanoparticles were characterized by scanning electron microscopy, transmission electron microscopy and dynamic light scattering. The thermal stability was assessed by differential scanning calorimetry data. In vitro release kinetics measurements of the drug from nanoparticles showed the controlled release pattern over a period of time. Cytotoxicity measurements by MTT assay confirmed that dipalmitoyl derivative in nano formulation successfully inhibited the cell growth. Thus the combined physical and biological evaluation of the different polyester-based nanoparticle containing the modified drug showed a facile approach to delivering 5-FU to the tumour site with enhanced efficacy.

Mithun Varghese Vadakkan,1 K Annapoorna,2 KC Sivakumar,3 Sathish Mundayoor,2 GS Vinod Kumar1 1Chemical Biology, 2Mycobacterium Research Group, 3Bioinformatics Facility, Rajiv Gandhi Centre for Biotechnology, Thiruvananthapuram, Kerala, India Abstract: Excipients having self-assembling properties are less explored in the field of dry powder inhalation (DPI) technology. An amphiphilic lipopolymer system was developed using stearic acid (SA) and branched polyethyleneimine (BPEI) (1800 Dalton), at different proportions by covalent conjugation. A molecular dynamic (MD) simulation tool was employed for predicting the carrier behavior in a polar in vivo condition. The structural characterization was carried out using nuclear magnetic resonance spectroscopy (NMR) and Fourier transform infrared (FTIR) spectroscopy. The physical nature of the lipopolymer was analyzed by differential scanning calorimetry. Determination of zeta potential and diameter of the micelles showed existence of cationic particles in the nano size range when a lower number of primary amino groups of BPEI was grafted with SA. The rifampicin (RIF)-loaded lipopolymer was also formulated further into spray-dried microparticles. Powder X-ray diffraction (PXRD) studies revealed that the RIF API (active pharmaceutical ingredient) exists as molecular dispersion in spray-dried microparticles. Topological analysis of the spray-dried nanomicelle was carried out using scanning electron microscopy (SEM). A large population of the drug-carrying particles were found to be under the inhalable size range (fine particle fraction 67.88% ± 3%). In vitro drug release kinetics from spray-dried nanomicelles were carried out at lung fluid pH. Keywords: molecular dynamics, dry powder inhalation, pulmonary tuberculosis, nanomicelle, lipopolymer, rifampicin

N Ashwanikumar,1,* Nisha Asok Kumar,2,* S Asha Nair,2 GS Vinod Kumar11Chemical Biology, 2Cancer Research Programme, Rajiv Gandhi Center for Biotechnology, Poojappura, Thiruvananthapuram, Kerala, India *These authors contributed equally to this workAbstract: Methacrylic-based copolymers in drug-delivery systems demonstrate a pH-sensitive drug-releasing behavior in the colon. In this study, copolymers of methacrylic acid and 2-ethyl hexyl acrylate were prepared using a microemulsion polymerization technique. The purified copolymer was characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and differential scanning calorimetry. 5-Fluorouracil (5-FU) was entrapped within methacrylic-based copolymers by a solvent evaporation method. The size of the nanogels formed was characterized by transmission electron microscopy and atomic force microscopy. In vitro drug-release studies using phosphate-buffered saline at different pH levels demonstrated the sustained release of 5-FU and its pH dependence. Cell proliferation assay of a human colon tumor colon cancer cell line (HCT-116) was performed and showed that the nanogels containing 5-FU exhibited considerable cytotoxicity in comparison with free 5-FU. Cell uptake of the nanogels was also monitored using confocal microscopy. Western blot analysis and flow cytometry studies confirmed that the nanogels could be successfully used as an efficient vector for pH-sensitive and controlled delivery of drugs specifically targeted to the colon.Keywords: 5-FU, methacrylic polymer, colon cancer, nanogel

Background Specific properties of amphiphilic copolymeric micelles like small size, stability, biodegradability and prolonged biodistribution have projected them as promising vectors for drug delivery. To evaluate the potential of δ-valerolactone based micelles as carriers for drug delivery, a novel triblock amphiphilic copolymer poly(δ-valerolactone)/poly(ethylene glycol)/poly(δ-valerolactone) (VEV) was synthesized and characterized using IR, NMR, GPC, DTA and TGA. To evaluate VEV as a carrier for drug delivery, doxorubicin (DOX) entrapped VEV micelles (VEVDMs) were prepared and analyzed for in vitro antitumor activity. Results VEV copolymer was successfully synthesized by ring opening polymerization and the stable core shell structure of VEV micelles with a low critical micelle concentration was confirmed by proton NMR and fluorescence based method. Doxorubicin entrapped micelles (VEVDMs) prepared using a modified single emulsion method were obtained with a mean diameter of 90 nm and high encapsulation efficiency showing a pH dependent sustained doxorubicin release. Biological evaluation in breast adenocarcinoma (MCF7) and glioblastoma (U87MG) cells by flow cytometry showed 2-3 folds increase in cellular uptake of VEVDMs than free DOX. Block copolymer micelles without DOX were non cytotoxic in both the cell lines. As evaluated by the IC50 values VEVDMs induced 77.8, 71.2, 81.2% more cytotoxicity in MCF7 cells and 40.8, 72.6, 76% more cytotoxicity in U87MG cells than pristine DOX after 24, 48, 72 h treatment, respectively. Moreover, VEVDMs induced enhanced apoptosis than free DOX as indicated by higher shift in Annexin V-FITC fluorescence and better intensity of cleaved PARP. Even though, further studies are required to prove the efficacy of this formulation in vivo the comparable G2/M phase arrest induced by VEVDMs at half the concentration of free DOX confirmed the better antitumor efficacy of VEVDMs in vitro. Conclusions Our studies clearly indicate that VEVDMs possess great therapeutic potential for long-term tumor suppression. Furthermore, our results launch VEV as a promising nanocarrier for an effective controlled drug delivery in cancer chemotherapy.

The aim of this study is to test the hypothesis that the newly synthesized poly(δ-valerolactone)/poly(ethylene glycol)/poly(δ-valerolactone) (VEV) copolymer grafted with folic acid would impart targetability and further enhance the anti-tumor efficacy of doxorubicin (DOX). Here, folic acid conjugated VEV (VEV-FOL) was synthesized by a modified esterification method and characterized using IR and NMR. DOX loaded VEV-FOL micelles were synthesized using a novel solvent evaporation method and were obtained with a mean diameter of 97 nm with high encapsulation efficiency and sustained in vitro release profile. Comparative studies of polymer micelles with and without folate for cellular uptake and cytotoxicity were done on folate receptor-positive breast cancer cell line, MDAMB231. The intracellular uptake tests showed significant increase in folate micellar uptake when compared to non-folate-mediated micelles. MTT assay followed by apoptosis assays clearly indicated that folate decorated micelles showed significantly better cytotoxicity (IC50 = 0.014 µM) and efficiency to induce apoptosis than other treated groups. Moreover, a significant G2/M arrest was induced by DOX loaded VEV-FOL micelles at a concentration where free drug failed to show any activity. Thus, our results show that the folic acid-labeled VEV copolymer is a promising biomaterial with controlled and sustainable tumor targeting ability for anticancer drugs which can open new frontiers in the area of targeted chemotherapy.

The present paper describes the synthesis, characterization and assessment of a novel class of insoluble polymeric polystyrene supports which combines polar poly(ethylene glycol)dimethacrylate as a cross-linker and poly(ethylene glycol) grafted poly(N,N-bisethylamine) as a dendritic template. Poly(N,N-bisethylamine) dendrimers were generated by a series of reactions such as Schiff base integration, acidolysis, diazotization and thionyl chloride treatment. The same successive sequences of reactions have been followed for second generation dendrimers also and subjected to PEGylation (PEG 600) to achieve the desirable physico-chemical properties. The applicability of the novel PEGylated dendrimer support was demonstrated by synthesizing linear as well as disulfide bonded peptides in high yields and purities.

Lekha Nair K1, Sankar Jagadeeshan2, S Asha Nair2, GS Vinod Kumar11Chemical Biology, Molecular Medicine Division, 2Cancer Research, Rajiv Gandhi Centre for Biotechnology, Poojappura, Thiruvananthapuram, Kerala, IndiaAbstract: Nanoscaled devices have great potential for drug delivery applications due to their small size. In the present study, we report for the first time the preparation and evaluation of antitumor efficacy of 5-fluorouracil (5-FU)-entrapped poly (D, L-lactic-co-glycolic acid) (PLGA) nanoparticles with dependence on the lactide/glycolide combination of PLGA. 5-FU-loaded PLGA nanoparticles with two different monomer combinations, 50-50 and 90-10 were synthesized using a modified double emulsion method, and their biological evaluation was done in glioma (U87MG) and breast adenocarcinoma (MCF7) cell lines. 5-FU-entrapped PLGA 50-50 nanoparticles showed smaller size with a high encapsulation efficiency of 66%, which was equivalent to that of PLGA 90-10 nanoparticles. Physicochemical characterization of nanoparticles using differential scanning calorimetry and X-ray diffraction suggested the presence of 5-FU in molecular dispersion form. In vitro release studies showed the prolonged and sustained release of 5-FU from nanoparticles with both the PLGA combinations, where PLGA 50-50 nanoparticles showed faster release. Nanoparticles with PLGA 50-50 combination exhibited better cytotoxicity than free drug in a dose- and time-dependent manner against both the tumor cell lines. The enhanced efficiency of PLGA 50-50 nanoparticles to induce apoptosis was indicated by acridine orange/ethidium bromide staining. Cell cycle perturbations studied using flow cytometer showed better S-phase arrest by nanoparticles in comparison with free 5-FU. All the results indicate that PLGA 50-50 nanoparticles possess better antitumor efficacy than PLGA 90-10 nanoparticles and free 5-FU. Since, studies have shown that long-term exposure of ailing tissues to moderate drug concentrations is more favorable than regular administration of higher concentration of the drug; our results clearly indicate the potential of 5-FU-loaded PLGA nanoparticles with dependence on carrier combination as controlled release formulation to multiplex the therapeutic effect of cancer chemotherapy.Keywords: 5-FU, poly (D, L-lactic-co-glycolic acid), controlled release