Search

Multi-branched molecules have recently demonstrated interesting behaviour as charge-transporting materials within the fields of perovskite solar cells (PSCs). For this reason, extended triarylamine dendrons have been grafted onto a pillar[5]arene core to generate dendrimer-like compounds, which have been used as hole-transporting materials (HTMs) for PSCs. The performances of the solar cells containing these novel compounds have been extensively investigated. Interestingly, a positive dendritic effect has been evidenced as the hole transporting properties are improved when going from the first to the second-generation compound. The stability of the devices based on the best performing pillar[5]arene material has been also evaluated in a high-throughput ageing setup for 500 h at high temperature. When compared to reference devices prepared from spiro-OMeTAD, the behaviour is similar. An analysis of the economic advantages arising from the use of the pillar[5]arene-based material revealed however that our pillar[5]arene-based material is cheaper than the reference.

We developed the diversity-oriented approach for the synthesis of tetrathia[8]circulenes with a variety of peripheral substituents. Iridium-catalyzed direct C–H borylation of tetrathienylene provided 1,4,7,10-tetraboryltetrathienylene as a major product. 1,4,7,10-Tetraboryltetrathienylene served as an a key intermediate to achieve the selective synthesis of octasubstituted or tetrasubstituted tetrathia[8]circulenes via rhodium-catalyzed annulation with symmetric internal alkynes or sequential Sonogashira–Hagihara coupling and base-promoted intramolecular cyclization. A variety of substituents were installed at the peripheral positions of tetrathia[8]circulenes systematically. The self-assembling behavior of tetrathia[8]circulenes was investigated using 1H NMR and AFM measurements. The number and the chain length of alkyl groups exerted a significant influence on the aggregation ability and the crystal packing structures of tetrathia[8]circulenes in both solution and solid states. We also found that the mo...

Hydrogen bonds can efficiently guide the self-assembly of organic materials, enabling to tune the properties of the aggregation processes. In the case of π-conjugated materials, several parameters such as temperature, concentration and solvent can be used to modify the aggregation state while tuning the optoelectronic properties. Chirality can be included within the impacting parameters due to the differences in molecular packing. Here, chiral and achiral thiophene-capped diketopyrrolopyrrole derivatives were designed and synthesized containing amide bonds, with the aim to study the interplay between chiral assemblies and their stabilization through hydrogen-bonding. Differences in aggregation properties were observed with spectroscopy and microscopy, and a contactless microwave-based technique was used to study their intrinsic charge carrier mobility. The positive role of hydrogen-bonding has been highlighted and the differences between chiral and achiral compounds have been elucidated.

Anion-responsive molecules comprising phenanthropyrrole rings were synthesized by oxidative coupling. Spectroscopic and theoretical examinations revealed the effects of the π-extended structures. In the solid state as ion-pairing assemblies, Cl- complexes of π-extended derivatives formed stacked structures composed of Cl- complexes themselves and those formed with countercations using extended π-moieties. Aliphatic anion-responsive molecules and their Cl- complexes, as ion pairs with the triazatriangulenium cation, provided hexagonal columnar structures with liquid-crystalline mesophases.

Despite numerous organic semiconductors being developed during the past decade, C70 derivatives are predominantly used as electron acceptors in efficient polymer solar cells (PSCs). However, as-prepared C70 mono-adducts intrinsically comprise regioisomers that would mask individual device performances depending on the substituent position on C70. Herein, we separate the regioisomers of C70 mono-adducts for PSC applications for the first time. Systematic investigations of the substituent position effect using a novel symmetric C70 mono-adduct ([70]NCMA) and a prevalent, high-performance one ([70]PCBM) reveals that we can control the structures of the blend films with conjugated polymers and thereby improve the PSC performances by regioisomer separation. Our approach demonstrates the significance of exploring the best-matching regioisomer of C70 mono-adducts with high-performance conjugated polymers, which would achieve a remarkable progress in PSC devices.

Alkyl-substituted pyrrole-based anion-responsive π-electronic systems formed supramolecular gels and liquid crystals through effective π-π stacking and van der Waals interactions. The addition of chloride as a planar cation salt afforded ion-pairing assemblies as soft materials comprising planar receptor-Cl(-) complexes and the cation.

Pentacyanocyclopentadienide (PCCp(-) ), a stable π-electronic anion, provided various ion-pairing assemblies in combination with various cations. PCCp(-) -based assemblies exist as single crystals and mesophases owing to interionic interactions with π-electronic and aliphatic cations with a variety of geometries, substituents, and electronic structures. Single-crystal X-ray analysis revealed that PCCp(-) formed cation-dependent arrangements with contributions from charge-by-charge and charge-segregated assembly modes for ion pairs with π-electronic and aliphatic cations, respectively. Furthermore, some aliphatic cations gave dimension-controlled organized structures with PCCp(-) , as observed in the mesophases, for which synchrotron XRD analysis suggested the formation of charge-segregated modes. Noncontact evaluation of conductivity for (C12 H25 )3 MeN(+) ⋅PCCp(-) films revealed potential hole-transporting properties, yielding a local-scale hole mobility of 0.4 cm(2) V(-1) s(-1) at semiconductor-insulator interfaces.

Interactions between designed charged species are important for the ordered arrangements of π-electron systems in assembled structures. As precursors of π-electron anion units, new arylethynyl-substituted dipyrrolyldiketone boron complexes, which showed anion-responsive behavior, were synthesized. They formed a variety of receptor-anion complexes ([1+1] and [2+1] types) in solution, and the stabilities of these complexes were discussed in terms of their thermodynamic parameters. Solid-state ion-pairing assemblies of [1+1]- and [2+1]-type complexes with countercations were also revealed by single-crystal X-ray analysis. In particular, a totally charge-segregated assembly was constructed based on negatively and positively charged layers fabricated from [2+1]-type receptor-anion complexes and tetrabutylammonium cations, respectively. Furthermore, the [1+1]-type anion complex of the receptor possessing long alkyl chains exhibited mesophases based on columnar assembled structures with contributions from charge-by-charge and charge-segregated arrangements, which exhibited charge-carrier transporting properties.

A series of peripherally dicyano-, tricyano-, and tetracyano-substituted subphthalocyanines (SubPcs) have been prepared through microwave-assisted, palladium-mediated cyanation of iodinated precursors. The introduction of π-accepting cyano groups in the macrocycle clearly influences its electronic and redox properties, which are dependent on the number and relative position of these substituents. Additional functionalization of the periphery of SubPcs with electron-donating or -withdrawing groups allows for a further fine-tuning of their features, leading to intensely absorbing, strongly electron-accepting panchromatic dyes with low-lying LUMO energy levels. Flash-photolysis time-resolved microwave conductivity measurements on vapor-deposited films demonstrate that some of these novel SubPc derivatives display remarkable intrinsic charge-carrier mobilities that are comparable to or larger than those of other known well-performing acceptor SubPcs; thus confirming their potential as n-type organic semiconductors for application in the fabrication of photovoltaic devices.

Herein, the self-assembly of a few 1,3-dihydroxyl functionalized naphthalene diimide (NDI) derivatives has been reported with particular emphasis on the impact of chirality on gelation and the effect of self-assembly on charge-carrier mobility. A nonconventional gelator (R)-NDI, devoid of any long alkyl chains, exhibited spontaneous gelation in tetra-chloroethylene (TCE). Based on X-ray crystallography and powder X-ray diffraction studies, it was established that a ladder-like hydrogen-bonded chain formation between the 1,3-dihydroxyl group leads to the fibrillar structures with preferential helicity. Likewise the (S)-isomer also exhibited identical gelation and mesoscopic structure but produced fibrils with the opposite handedness. Intriguingly, an equimolar mixture of the (R)- and (S)-isomers did not show any gelation ability, rather a macroscopic precipitation was observed and, in sharp contrast to the individual isomers, the morphology of the mixture showed ill-defined near spherical agglomerates. Differential scanning calorimetry (DSC) studies revealed an identical crystallization peak for the supramolecular polymer produced from the enantiopure gelators ((R)- or (S)-isomer), which was absent in their equimolar mixture. However, mixtures of the two isomers with enantiomeric excess retrieved the gelation ability and preferential helicity demonstrating that chiral amplification is operative in the present system through the so-called "majority rule" effect. Chirality induction was also realized by the "sergeant and soldier" principle in the supramolecular assembly of an achiral NDI gelator in the presence of either the (R)- or (S)-isomer as the chiral dopant. However, the strong helical bias induced by the chiral gelator was found to be opposite in nature compared to that found in the self-assembly of the pure chiral gelator that has been rarely reported in the literature. Flash-photolysis time-resolved microwave conductivity (FP-TRMC) measurements indicated the strong positive impact of the gelation on the electrical conductivity.

Triarylalkene-capped conjugated rotaxanes were synthesized via a palladium-catalyzed tandem Sonogashira/hydroaryl reaction between aryl halides and terminal alkynes bearing two permethylated α-cyclodextrins (PM α-CDs) with high regioselectivity because of the insulation effect of the PM α-CDs. Moreover, sequential Sonogashira coupling and hydroarylation reactions using different aryl substrates afforded a regio- and stereoselective trisubstituted alkene as a single product. This new class of rotaxane-forming reactions can be used to increase the diversity of rotaxane skeletons, and thereby the material functionalities of rotaxanes.

[3n] Cyclophanes ([3n] CPs : n= 2-6) including the ultimate member of this series, [36] CP, and fluorinated [33] CPs were synthesized. The fundamental structural properties of these compounds both in solution and in the solid state are described. [3n] CP shows strong electron-donating ability, which was evaluated by the λmax of the charge transfer (CT) band of the [3n] CP-TCNE complex and oxidation potential, and this is attributed to the effective hyperconjugation between the benzyl methylenes and the benzene ring. The solid state structural study of [3n] CP-TCNQ-F4 complexes provided the basic knowledge for understanding the CT interaction in the solid state. [3n] CPs served as good ligands for Ru (II) and Os (II) metals. [3n] CP (n=2, 4) reacted with dicyanoacetylene to give barrelenophane, which gave various valence isomers on photolysis. Our efforts to the synthesis of hexaprismane derivative via photolysis of [3n] CP is described.

(±)-[3 2 ](1,4)Barrelenophane was completely resolved into its enantiomers by HPLC separation using a chiral stationary phase (Chiralcel OD) with hexane/propan-2-ol (1:9). The specific rotations and circular dichroism spectra of (+)- and (−)-[3 2 ](1,4)barrelenophanes indicated the enantiomeric relationships. The longest absorption band at 360 nm ( e 541, CH 2 Cl 2 ) is identified mainly as AN intramolecular charge transfer band between the benzene ring and the double bond conjugated with cyano groups. The X-ray structure of the (+)-isomer has been determined.

We used first-principles calculations to investigate the hole mobility of metal-containing poly(phenylene ethynylene) insulated molecular wires. The metal–organic bond effects were considered using ruthenium(II) porphyrin–pyridyl and platinum(II) acetylide as the organometallic moieties. We found that high hole mobility can be achieved even when the metal–organic dπ–pπ interaction is weak. The weak metal–organic interaction reduces the structural deformation that accompanies hole hopping and compensates the reduced conjugation inside the molecular wire. Our results suggest a new principle for the design of functionalized metallopolymers with high carrier mobilities.