Search

The Shagou deposit, located in the eastern Qinling orogenic belt, central China and hosted by the Taihua Supergroup, is a large-sized Ag–Pb–Zn deposit and has proven reserves of 1.54million tons of ore with grades of 767g/t Ag, 13.24% Pb and 4.31% Zn. The ore-forming fluids have been previously interpreted as products of direct exsolution of a crystallizing magma or sudden decompression of the fluid exsolved from magma, defining the Shagou deposit as an intrusion-related system. In this study, the Shagou deposit has been identified as an orogenic type mineralization system. The hydrothermal ore-forming process can be divided into the early quartz–pyrite, middle quartz–polymetallic sulfides and late quartz–carbonate stages. Four types of fluid inclusions in quartz can be distinguished between PC, C, W and PW types. The early and middle stage quartz contains the PC, C and W type fluid inclusions, while only W and PW type fluid inclusions can be observed in the late stage quartz. In the early stage, the W type fluid inclusions homogenized at 173–369°C (concentrating at 200–240°C), with salinities ranging from 5.4 to 8.3wt.% NaCl equiv. But in the middle stage, the C and W type fluid inclusions homogenized at 112–313°C (concentrating at 180–220°C), with salinities ranging from 0.7 to 13.6wt.% NaCl equiv. In the late stage, the W type fluid inclusions homogenized at 108–253°C (concentrating at 160–200°C), with salinities ranging from 2.1 to 8.1wt.% NaCl equiv. The fluids may have experienced a boiling process or fluid mixing in the middle stage. The estimated trapping pressures of fluid inclusions in the middle stage ranged from 33 to 211MPa, corresponding to a mineralization depth from 3.3 to 7.7km. For the early stage fluids, the calculated δ18OH2O and δDH2O values are 7.5–9.1‰, −96.2 to −110.5‰, respectively. For the middle stage fluids, these two values are 1.5–5.3‰, −75.6 to −110.7‰ but change to 1.0‰ and −87‰ for the late stage, suggesting an evolution from metamorphic to meteoric in origin. In general, the Shagou Ag–Pb–Zn deposit is similar in many respects to typical orogenic type mineralization systems. [ABSTRACT FROM AUTHOR]

The Dashui porphyry granitoids in the western Qinling Orogen are spatially associated with the Dashui gold deposit, but their ages and tectonic setting have not been well defined yet in previous studies. This paper reports the results and understandings obtained from our original study in geochronology and isotope and element geochemistry. SHRIMP zircon U-Pb dating yielded ages of 213.7 ± 2.7 Ma for granitic stock and 215.1 ± 2.5 and 210.2 ± 1.6 Ma for granitic dikes. The granitoids are characterized by high LREE but low HREE and HFSE. They have (87Sr/86Sr) i ratios of 0.706 to 0.709 and εNd(t) values of −5.3 to −7.6. The majority of zircons in the Dashui granitoids have εHf(t) values ranging from −6.2 to 6.7 and TDM2(Hf) ages from 743 to 1464 Ma. The isotope signatures, together with La/Y and Mg# values, show that the magmas are mainly sourced from partial melting of a subducted slab, and possibly assimilated immature sediments during upward migration. Thus, the Dashui granitoids most likely formed in a volcanic arc where supra-subduction zone melts assimilated lower crustal material no later than 215 Ma. Copyright © 2014 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

The East Qinling region in central China, hosting several tens of Mesozoic magmatic-hydrothermal Mo deposits, is one of the largest molybdenum belts in the world. The Zhifang Mo deposit is hosted in volcanic rocks of the Xiong'er Group in the Waifangshan area, Qinling Orogen. Previous studies variously correlated the mineralization in this deposit with Yanshanian magmatism or Palaeo-Mesoproterozoic volcanic-hydrothermal events. The orebodies are associated with quartz veins and controlled by subsidiary faults of the Machaoying Fault. The ore-forming process can be divided into the early, middle and late stages and is characterized by quartz-pyrite, quartz-polymetallic sulphide and quartz-carbonate veins, respectively. The early-stage quartz is structurally deformed, suggesting a compressional tectonic regime; the middle-stage sulphides fill the fractures of the early-stage assemblages and show no deformation, suggesting a tensional setting; the late-stage veins mostly infill the open-space fissures. Three types of fluid inclusions (FIs) are identified at the Zhifang deposit: H2O-NaCl (W-type), CO2-rich (C-type) and daughter mineral-bearing inclusions (S-type). Fluid inclusions of early-stage quartz homogenize between 380 and 470 °C, with salinities ranging from 0.4 to 9.6 wt.% NaCl equiv., whereas the late-stage calcite contains only the W-type FIs with homogenization temperatures of lower than 240 °C, and salinities of 0.4-8.7 wt.% NaCl equiv. This indicates that the ore fluid system evolved from CO2-rich, probably metamorphic hydrothermal to CO2-poor, meteoric fluid. All three types of FIs can be observed in the middle-stage quartz, and even in the microscopic domain of a crystal, suggesting that this heterogeneous association was trapped from a boiling fluid system. These FIs homogenized at temperatures ranging from 250 to 360 °C and display two salinity clusters of <18.5 and 29.1-29.9 wt.% NaCl equiv. These results suggest that metal precipitation resulted from fluid boiling. The estimated trapping pressures of FIs range from 101 to 285 MPa, suggesting an alternating lithostatic-hydrostatic fluid system, which was controlled by a fault-valve at the depth of 10 km. The δ34S values of ore minerals from the Zhifang Mo deposit show a range between −11.8‰ and 6.0‰, with a bimodal distribution. The early-stage pyrite has a positive δ34S value of 6.0‰ that is similar to the host rocks of the Xiong'er Group and the Taihua Supergroup, suggesting that the wall rocks contributed much of the sulphur to the early-stage pyrite during fluid-rock interaction. However, the δ34S values of the middle-stage sulphides have negative mean and restricted range from −11.8‰ to −4.5‰. The widespread rutile grains coexisting with molybdenite in the middle-stage correlate the negative δ34S values with relatively oxidized fluids. We consider phase separation as an efficient mechanism for ore-fluid oxidation and molybdenum deposition based on fluid inclusions and sulphur isotope data. Geological, fluid inclusion and sulphur isotope data of the Zhifang Mo deposit suggest that the Mo mineralization is unrelated to the Yanshanian magmatism or the Palaeo-Mesoproterozoic volcanic-hydrothermal event. Here we propose that the Zhifang Mo deposit may be considered as an orogenic mineral system, with its formation in an active continental margin related to the northward subduction of the Mian-Lue oceanic plate during the Triassic. Copyright © 2014 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

[Display omitted] • The hydrothermal titanite associated with Au mineralization was formed at 130.8 ± 0.63 Ma. • The early Cretaceous Au mineralization overprinted the Triassic and late Jurassic Mo-Pb mineralization in Huangshui'an. • The gold precipitation mechanisms are sulfidation, collection-redissolution by LMCE melt, and changes in f Te 2 and f S 2. Huangshui'an deposit, situated in the Xiong'ershan area of Qinling orogenic belt (QOB) in China, is a globally rare carbonatite-type molybdenum polymetallic deposit that contains economic Mo, Au, Pb, and REE mineralization. The molybdenite Re-Os ages (Ca. 213.5–209.2 Ma) indicates that Huangshui'an Mo mineralization formed at Late Triassic. However, it is still unclear whether the Au mineralization is related to carbonatite dykes, and the formation age and genesis mechanism of Au mineralization remain poorly understood at Huangshui'an. This paper presents a comprehensive investigation of the Au mineralization events at the Huangshui'an deposit, including geology, mineralogy, and geochronology. The aim is to provide insights into its formation and mineralization processes and offer a broader understanding of regional Au metallogeny. Based on petrographic investigations, four stages are identified in the Au mineralization as follows: (I) quartz-K-feldspar stage; (II) quartz-pyrite-gold stage, including (IIA) pyrite-native gold sub-stage and (IIB) gold-tellurite-bismuthide sub-stage; (III) quartz-pyrite-polymetallic sulphide-oxide stage; and (IV) calcite-quartz-chlorite stage. The LA-ICP-MS titanite U-Pb dating yields a weighted mean age of 130.8 ± 0.63 Ma which determined that the Au mineralization at Huangshui'an was in the Early Cretaceous and was an independent mineralization event, which may be related to the lithosphere's destructive effect on the North China Craton (NCC). Combined with mineralography by automatic quantitative mineral analysis and testing system (TIMA), we consider that tellurium-bismuth minerals are closely associated with Au mineralization. The sulfur and tellurium fugacity of the ore-forming fluids in each stage were calculated using metal sulfide-oxides and tellurium-bismuth minerals. It was concluded that the precipitation of Au in the Huangshui'an deposit was mainly due to the combined effects of sulfidation, gold collection-redissolution by the low-melting point chalcophile elements (LMCE) melts, and the variation of sulfur fugacity and tellurium fugacity. [ABSTRACT FROM AUTHOR]

[Display omitted] • Mo isotopes variation in both the two Mo deposits may be controlled by Rayleigh and equilibrium fractionation. • The Taihua Soupergroup and the Xiong'er Group would be the main contributor of Mo metal for the Paleoproterozoic Mo mineralization. • The mantle with light isotopically Mo involved into the Mo Paleoproterozoic mineralization in Qinling orogenic belt. Longmendian and the Zhaiwa are the two oldest Mo deposits in the Qinling orogenic belt, China, which is one of the most important Mo provinces in the world with numerous and diverse types of Mo deposits that experienced multistaged mineralization. Here we investigated Mo isotope compositions in molybdenite and rocks from the Longmendian and the Zhaiwa Paleoproterozoic Mo deposits to link Mo isotopes to the sources of Mo metal. The significant Mo isotope variation in the Longmendian and the Zhaiwa Mo deposits (δ98Mo = −0.51‰ to + 1.01‰ and −0.37‰ to +0.53‰, respectively, relative to NIST-3134) may be controlled by Rayleigh and equilibrium fractionation. The different distributions of Mo isotope compositions of molybdenite in the two deposits may be caused by the physiochemical differences in ore-forming systems. The high Mo content of the Taihua Supergroup and the Xiong'er Group, combined mean values of Mo isotopes between molybdenite and whole rocks suggested that the two stratigraphic units would be the main contributor of Mo for the Paleoproterozoic Mo mineralization that mixed with small proportions of isotopically lower values of the mantle. [ABSTRACT FROM AUTHOR]