Search

ObjectivesTo investigate the relationship between circummaxillary sutures and miniscrew-assisted rapid palatal expansion (MARPE) success in adult male patients and to evaluate the correlation between the width of the sutures and the maxilla expansion ratio.Materials and MethodsThis retrospective study comprised 40 adult male patients treated with MARPE divided into a separation group (N = 20, mean age, 21.9 years) consisting of subjects with midpalatal suture opening and a nonseparation group (N = 20, mean age, 21.7 years) consisting of subjects with no midpalatal suture opening. Cone-beam computed tomography images were obtained before MARPE expansion for both groups and after expansion for the separation group. Vertical and horizontal skeletal relationships, palate length, and widths of 10 circummaxillary sutures before expansion were compared. The correlation between maxilla expansion ratio (jackscrew expansion to maxillary expansion ratio) and circummaxillary suture widths was also analyzed in the separation group.ResultsThere were no significant differences in age, vertical and horizontal skeletal relationships, and palate length between the two groups. Zygomaticomaxillary, pterygomaxillary, midpalatal, and transverse palatine sutures showed significantly greater width in the separation group (P < .05). The zygomaticomaxillary suture showed the greatest difference (Δ = 0.36 mm) between the groups. The zygomaticomaxillary and pterygomaxillary sutures showed significant positive correlation with the maxilla expansion ratio (P < .01).ConclusionsIn adult male patients, greater circummaxillary suture widths before MARPE expansion, especially zygomaticomaxillary and pterygomaxillary sutures, resulted in a better chance of successful suture separation and more maxillary expansion.

This study aimed to evaluate the superimposition accuracy of digital modes for measuring tooth movement in patients requiring anterior retraction after premolar extraction based on the proposed reference regions.Forty patients treated with bilateral maxillary first premolar extraction were divided into two groups: moderate retraction (7.0 mm) and maximum retraction (≥ 7.0 mm). Central incisor displacement was measured using cephalometric superimpositions and three-dimensional (3D) digital superimpositions with the 3rd or 4th ruga as the reference point. The Wilcoxon signed-rank test and linear regression analyses were performed to test the significance of the differences and relationships between the two measurement techniques.In the moderate retraction group, the central incisor anteroposterior displacement values did not differ significantly between 3D digital and cephalometric superimpositions. However, in the maximum-retraction group, significant differences were observed between the anteroposterior displacement evaluated by the 3rd ruga superimposition and cephalometric methods (This study demonstrated that 3D digital superimpositions were clinically as reliable as cephalometric superimpositions in assessing tooth movements in patients requiring moderate retraction. However, the reference point should be carefully examined in patients who require maximum retraction.

Objectives To compare skeletal and dentoalveolar changes of miniscrew-assisted rapid palatal expansion (MARPE) according to the length of the miniscrews. Materials and Methods This two-arm parallel-randomized controlled trial included 32 adult patients aged 19–35 years who received orthodontic treatment with MARPE. Patients were allocated to two groups, group long (L) and short (S), through block randomization according to the length of the miniscrews installed in MARPE. Cone-beam computed tomography was performed before expansion and after removal of the MARPE; superimposition of the images was conducted. The primary outcome included the amount of bone expansion and the change in the inclination of the anchorage teeth. The secondary outcome included the success rate of midpalatal suture opening and stability of the miniscrews. Blinding was performed during outcome assessment. Results The final sample comprised 31 patients. There was no significant difference in patient characteristics between group L (n = 16) and group S (n = 15). The change in the width of the processus zygomaticus (P = .010) and ectocanine (P = .001) was significantly higher in group L. A significantly higher success rate of the posterior miniscrews was seen in group L (P = .024). There was no statistically significant difference in the success rate of suture separation or change in tooth inclination. Notable complications were not reported. Conclusions MARPE with longer miniscrews can increase the amount of expansion of the maxillary basal bone and canine alveolar bone. Although it also aided in miniscrew stability, it did not guarantee successful midpalatal suture separation.

Objective To quantitatively analyze the effect of nicotine on orthodontic tooth movement (OTM) and bone remodeling in rats using micro-computed tomography and tartrate-resistant acid phosphatase immunostaining. Methods Thirty-nine adult male Sprague-Dawley rats were randomized into three groups: group A, 0.5 mL normal saline (n = 9, 3 per 3, 7, and 14 days); group B, 0.83 mg/kg nicotine (n = 15, 5 per 3, 7, and 14 days); and group C, 1.67 mg/kg nicotine (n = 15, 5 per 3, 7, and 14 days). Each animal received daily intraperitoneal injections of nicotine/saline from the day of insertion of identical 30-g orthodontic force delivery systems. A 5-mm nickel-titanium closed-coil spring was applied between the left maxillary first molar (M1) and the two splinted incisors. The rate of OTM and volumetric bone changes were measured using micro-computed tomography. Osteoclasts were counted on the mesial alveolar bone surface of the distobuccal root of M1. Six dependent outcome variables, including the intermolar distance, bone volume fraction, bone mineral density, trabecular thickness, trabecular volume, and osteoclast number, were summarized using simple descriptive statistics. Nonparametric Kruskal-Wallis tests were used to evaluate differences among groups at 3, 7, and 14 days of OTM. Results All six dependent outcome variables showed no statistically significant among group-differences at 3, 7, and 14 days. Conclusions The findings of this study suggest that nicotine does not affect OTM and bone remodeling, although fluctuations during the different stages of OTM in the nicotine groups should be elucidated in further prospective studies.

Previously, in the case of malocclusion owing to skeletal discrepancy in adults, the amount of tooth movement was limited since there was no reliable skeletal anchorage device. The only way to treat this case was by repositioning the maxilla and mandible via orthognathic surgery, but most patients are reluctant to undergo surgery owing to the risk and expenses incurred. However, with the current introduction and use of miniscrews as temporary anchorage devices, the entire dental arch can be relocated to a target position without surgery, thus broadening the scope of non-surgical orthodontic treatment compared to the past. For a non-surgical approach to improve skeletal discrepancy, anteroposterior, vertical and transverse displacements of the dental arch are necessary. In this case, the localization of the centre of resistance of the whole arch must precede the appliance design with an appropriate biomechanical design. Especially, in the transverse dimension, the envelope of discrepancy is reportedly narrow, and the tooth movement must accompany the orthopaedic correction involving the midpalatal suture expansion. Recently, in adults with transverse maxillomandibular discrepancy, miniscrew-assisted rapid palatal expansion (MARPE) can be performed. Moreover, compared to surgically assisted rapid palatal expansion, MARPE reduces the cost to the patient and achieves clinically acceptable stable maxillary expansion. In this article, we will discuss the role of total arch movement and MARPE in widening the scope of non-surgical orthodontic treatment, despite the inherent limitations of miniscrews' mechanical aspects.

Objective Increased gingival elasticity has been implicated as the cause of relapse following orthodontic rotational tooth movement and approaches to reduce relapse are limited. This study aimed to investigate the effects of sulforaphane (SFN), an inhibitor of osteoclastogenesis, on gene expression in gingival fibroblasts and relapse after rotational tooth movement in beagle dogs. Methods The lower lateral incisors of five beagle dogs were rotated. SFN or dimethylsulfoxide (DMSO) were injected into the supra-alveolar gingiva of the experimental and control group, respectively, and the effect of SFN on relapse tendency was evaluated. Changes in mRNA expression of extracellular matrix components associated with gingival elasticity in beagles were investigated by real-time polymerase chain reaction. Morphology and arrangement of collagen fibers were observed on Masson’s trichrome staining of buccal gingival tissues of experimental and control teeth. Results SFN reduced the amount and percentage of relapse of orthodontic rotation. It also decreased the gene expression of lysyl oxidase and increased the gene expression of matrix metalloproteinase (MMP) 1 and MMP 12, compared with DMSO control subjects. Histologically, collagen fiber bundles were arranged irregularly and were not well connected in the SFN-treated group, whereas the fibers extended in parallel and perpendicular directions toward the gingiva and alveolar bone in a more regular and well-ordered arrangement in the DMSO-treated group. Conclusions Our findings demonstrated that SFN treatment may be a promising pharmacologic approach to prevent orthodontic rotational relapse caused by increased gingival elasticity of rotated teeth in beagle dogs.

Objective The aim of this study was to evaluate the stability of bimaxillary surgery involving bilateral intraoral vertical ramus osteotomy performed with or without presurgical miniscrew-assisted rapid palatal expansion (MARPE) in adult patients with skeletal Class III malocclusion. Methods A total of 40 adult patients with skeletal Class III malocclusion were retrospectively divided into two groups (n = 20 each) according to the use of MARPE for the correction of transverse maxillomandibular discrepancy during presurgical orthodontic treatment. Serial lateral cephalograms and dental casts were analyzed until 6 months after surgery. Results Before presurgical orthodontic treatment, there was no significant differences in terms of sex and age between groups. However, the difference of approximately 3.1 mm in the maxillomandibular intermolar width was statistically significant (p < 0.001). Two days after surgery, the mandible had moved backward and upward without any significant intergroup difference. Six months after surgery, the maxillary intercanine (2.7 ± 2.1 mm), interpremolar (3.6 ± 2.4 mm), and intermolar (2.0 ± 1.3 mm) arch widths were significantly increased (p < 0.001) relative to the values before presurgical orthodontic treatment in the MARPE group; these widths were maintained or decreased in the control group. However, there was no significant difference in surgical changes and the postsurgical stability between the two groups. No significant correlations existed between the amount of maxillary expansion and postsurgical mandibular movement. Conclusions MARPE is useful for stable and nonsurgical expansion of the maxilla in adult patients with skeletal Class III malocclusion who are scheduled for bimaxillary surgery.

Objective This study aimed to evaluate the differences in cephalometric characteristics and skeletal maturation in girls with central precocious puberty (CPP) via lateral and hand-wrist radiographs. We also aimed to identify the indicators that are most effective for determining skeletal maturity in these patients. Methods The study included 70 Korean girls (mean age, 8.5 ± 0.5 years) diagnosed with CPP at the Department of Pediatrics, and 48 normal healthy age-matched girls who visited the Department of Orthodontics and had no history of hormone treatment or growth problems. Skeletal maturation was evaluated using lateral cephalometric and hand-wrist radiographs using cervical vertebrae maturation indicators (CVMI) and skeletal maturity indicators (SMI). Results The mean mandibular plane angle was smaller in the CPP group than in the control group (35.8° ± 4.9° vs. 39.0° ± 6.5°), resulting in greater posterior facial height (p = 0.003). SMI was significantly greater in the CPP group (3.5 ± 1.4 vs. 2.0 ± 1.0) than in the control group (p = 0.001) and was significantly associated with CPP (r = 0.492; p = 0.001), whereas CVMI was not. Conclusions In comparison with the control group, the CPP group exhibited a smaller mandibular plane angle, greater posterior facial height, and greater skeletal maturation. SMI may be more suitable than CVMI for determining skeletal maturation in CPP. Hand-wrist radiography is recommended in addition to lateral cephalogram for predicting growth in girls with CPP.

In this study, we aimed to evaluate and compare the bracket positioning accuracy of the indirect bonding (IDB) transfer tray fabricated in-clinic using the tray printing (TP) and marker-model printing methods (MP).The TP group was further divided into 2 groups (single-tray printing [STP] and multiple-tray printing [MTP]) depending on the presence of a tray split created using the 3-dimensional (3D) software. Five duplicated plaster models were used for each of the 3 experimental groups, and a total of 180 artificial teeth, except the second molar, were evaluated in the experiment. The dental model was scanned using a model scanner (E3; 3Shape Dental Systems, Copenhagen, Denmark). Virtual brackets were placed on facial axis points, and the IDB trays were designed and fabricated using a 3D printer (VIDA; EnvisionTEC, Mich). The accuracy of bracket positioning was evaluated by comparing the planned bracket positions and the actual bracket positions using 3D analysis on inspection software. The main effects and first-order interaction effects were analyzed together by analysis for the analysis of variance.The mean distance and height errors were significantly lower in the STP group than those in the MP and MTP groups (P 0.05). The mean distance error was 0.06 mm in the STP group and 0.09 mm in the MP and MTP groups. The mean height error was 0.10 mm in the STP group and 0.15 mm and 0.18 mm in MP and MTP groups, respectively. However, no significant differences were observed in the angular errors among the 3 groups.The in-office-fabricated IDB system with computer-aided design and 3D printer is clinically applicable after considering the linear and angular errors. We recommend IDB trays fabricated using the STP method owing to the lower frequency of bracket positioning errors and ease of fabrication.

Objective This study compared soft tissue changes after extraction of the four premolars followed by maximum retraction of the anterior teeth according to the type of anterior teeth movement tipping and translation. Methods Patients who had undergone orthodontic treatment involving the extraction of four premolars were retrospectively selected and divided into either the tipping (n = 27) or translation (n = 26) groups based on the retraction of the incisor root apex and the axis changes of the incisors during the treatment period. Lateral pre- and post-treatment cephalograms were analyzed. Results There were no significant differences between the tipping and translation groups before treatment. The retraction amounts of the root apex of the upper and lower incisors in the tipping group were 0.33 and 0.26 mm, respectively, and 5.02 and 5.31 mm, respectively, in the translation group (p < 0.001). The posterior movements of soft tissue points A and B in the tipping group were 0.61 and 1.25 mm, respectively, and 1.10 and 3.25 mm, respectively, in the translation group (p < 0.01). The mentolabial sulcus angle increased by 5.89° in the tipping group, whereas it decreased by 8.13° in the translation group (p < 0.001). Conclusions An increased amount of retraction of the incisor root apex led to the increased posterior movement of soft tissue points A and B, and this appeared more distinct in cases involving the lower incisor and lower lip.

To elucidate genetic factors affecting orthodontic treatment duration, we employed targeted next-generation sequencing on DNA from the saliva of 117 patients undergoing orthodontic treatment after premolar extraction. The clinical characteristics of patients were summarized, and the association of clinical variables with treatment duration was assessed. Patients whose treatment duration deviated from the average were classified into an extreme long group or an extreme short group. We identified single nucleotide polymorphisms (SNPs) significantly enriched in the two groups via targeted sequencing. Nine SNPs (six genes) were significantly enriched in both groups. In the extreme long group, the frequency of the CC genotypes of WNT3A, SPP1 (rs4754, rs9138), and TNFSF11, the TT genotype of SPP1 (rs1126616), as well as the GG genotype of SFRP2 was significantly higher than in the short group. In the extreme short group, the TC genotype of SPP1, the AA genotype of P2RX7, the CT genotype of TNFSF11, and the AG genotype of TNFRSF11A tended to exhibit higher frequency than in the long group. Taken together, we identified genetic polymorphisms related to treatment duration in Korean orthodontic patients undergoing premolar extraction. Accurate prediction of the treatment period through further research will be of great aid to patients as well as orthodontists.

Objectives: To determine whether the success rate and primary stability of surface-treated miniscrews differ from those of nontreated miniscrews. Materials and Methods: Patients who required one or more miniscrews for the same reason in each quadrant were recruited into a single-blinded, split-mouth, randomized, controlled trial with a 1:1 allocation ratio. Self-drilling miniscrews with two surface types were used: those with no surface treatment, and those with an acid-etched surface treatment. The cumulative success rate and primary stability of each type of miniscrew were examined, and factors potentially affecting the success and failure of miniscrews were investigated. Results: Forty patients were included in the study, with a total of 98 orthodontic miniscrews. The overall success rate was 88.8%, and the respective success rates for acid-etched and machined surface miniscrews were 91.8% and 85.7%. The respective mean insertion torques were 13.62 ± 5.95 N·cm and 13.38 ± 4 N·cm, and periotest values measured immediately after insertion were −0.50 ± 2.77 for acid-etched miniscrews and −0.28 ± 3.36 for machined surface miniscrews. There was no significant difference in the mean insertion torques and periotest values according to surface treatment and jaw. Conclusions: Neither the success rate nor the primary stability of acid-etched surface miniscrews and machined surface miniscrews differed significantly. There is a high possibility that miniscrews will fall out in patients who have an open bite or those who require total distalization.

Becker’s nevus is a relatively common skin lesion with brown hyperpigmentation and hypertrichosis. It may be expressed simultaneously with other cutaneous, muscular, or skeletal defects, such as hypoplasia of the breast or scoliosis, for which the term “Becker’s nevus syndrome” has been proposed. An 8-year-old boy presented with a Becker’s nevus on the right cheek, chin, and upper neck with alveolar bone hypertrophy in the anterior mandible, which led to an anterior crossbite and severe canting of the mandibular anterior teeth. Through orthopedic treatment using a face mask, the anteroposterior jaw relationship was improved. In phase 2 treatment, we corrected the canting of the mandibular anterior teeth with a segmental intrusion of the mandibular anterior right teeth into the hypertrophic alveolar bone area. The facial profile was improved along with acceptable occlusion, and the treatment result was stable at 1 year after the end of the treatment, without any periodontal attachment loss, root resorption of mandibular anterior teeth, or increase in the size of the hypertrophic region. This case report describes the successful comprehensive treatment of a growing patient with skeletal Class III malocclusion and multiple characteristics of Becker’s nevus syndrome.

Objectives To date, the clinical stability of dual-thread orthodontic miniscrews has not been studied. This study aimed to compare the primary stability and long-term clinical success rate of dual-thread and cylindrical orthodontic miniscrews and to examine the association between various clinical factors and the success rate of miniscrews. Materials and Methods A total of 145 cylindrical and 135 dual-thread miniscrews were inserted in the maxillary and mandibular buccal alveolar areas of 142 patients. The torque and Periotest (Siemens, Bensheim, Germany) values were recorded during insertion and removal. The effect of clinical variables such as sex, age, screw design, jaw, side of placement, root proximity, and site of placement on the success rate was examined using logistic regression analysis. Results There was no statistically significant difference (P = .595) in the overall clinical success rate between the two designs, with an overall success rate of 82.1% and 84.4% for the cylindrical and dual-thread miniscrews, respectively. Age and screw-root proximity were significantly associated with failure (P < .05). Conclusions The dual-thread miniscrews did not show superior long-term stability and clinical success rate as compared with the cylindrical miniscrews. The results of this study suggest that patient age and screw-root proximity influence the clinical success rate of miniscrews.

This study sought to test the feasibility of a newly developed plane called computed modified absolute mandibular midsagittal plane (cmAMP) based on the similarity index (SI) for evaluating the stereoscopical symmetry of the mandible by comparison with other proposed midsagittal planes. This study involved 29 adult patients (15 men, 14 women, average age, 23.1 &plusmn, 6.9 years) with skeletal Class III facial asymmetry who underwent bimaxillary orthognathic surgery. Using cone-beam computed tomography images taken before and 1 year after surgery, cmAMP with the highest SI value between the two anterior segments of the hemi-mandible was set by a computer algorithm. Results show that the SI using cmAMP had the highest value (0.83 &plusmn, 0.04) before surgery compared to the other midsagittal planes, and was not significantly different from the SI (0.80 &plusmn, 0.05) using a facial midsagittal plane (MSP) after surgery. The distance (1.15 &plusmn, 0.74 mm) and angle (2.02 &plusmn, 0.82&deg, ) between MSP and cmAMP after surgery were significantly smaller than those between MSP and other midsagittal planes. In conclusion, the cmAMP plane best matches the two anterior segments of hemi-mandible symmetrically and is the closest to MSP after orthognathic surgery in skeletal Class III patients with facial asymmetry.

This study aims to compare the torque values for various lengths of the titanium-based orthodontic anchor screw (OAS), different anchorage methods and varying artificial bone densities after predrilling. Furthermore, the effects of these parameters on bone stability are evaluated. A total of 144 OASs were prepared with a diameter of 1.6 mm and heights of 6, 8 and 10 mm. Artificial bones were selected according to their density, corresponding to Grades 50, 40 and 30. Torque values for the automatic device and manual anchorage methods exhibited a statistically significant difference for the same-sized OAS, according to the bone density of the artificial bones (p &lt, 0.05). However, when insertion torque was at the maximum rotations, there was no significant difference in the torque values for the Grade 30 artificial bone (p &gt, 0.05). When the torque values of both anchorage methods were statistically compared with the mean difference for each group, the results of the manual anchorage method were significantly higher than those of the automatic device anchorage method (p &lt, 0.05). A statistically significant difference was observed in the bone stability resulting from different OAS anchorage methods and artificial bone lengths. These findings suggest that the automatic anchorage method should be used when fixing the OAS.

Objective The aim of this study was to evaluate the stress distribution and displacement of various craniofacial structures after nonsurgical rapid palatal expansion (RPE) with conventional (C-RPE), bone-borne (B-RPE), and miniscrew-assisted (MARPE) expanders for young adults using three-dimensional finite element analysis (3D FEA). Methods Conventional, bone-borne, and miniscrew-assisted palatal expanders were designed to simulate expansion in a 3D FE model created from a 20-year-old human dry skull. Stress distribution and the displacement pattern for each circumaxillary suture and anchor tooth were calculated. Results The results showed that C-RPE induced the greatest stress along the frontal process of the maxilla and around the anchor teeth, followed by the suture area, whereas B-RPE generated the greatest stress around the miniscrew, although the area was limited within the suture. Compared with the other appliances, MARPE caused relatively even stress distribution, decreased the stress on the buccal plate of the anchor teeth, and reduced tipping of the anchor teeth. Conclusions The findings of this study suggest that the incorporation of miniscrews in RPE devices may contribute to force delivery to the sutures and a decrease in excessive stress on the buccal plate. Thus, MARPE may serve as an effective modality for the nonsurgical treatment of transverse maxillary deficiency in young adults.

This retrospective observational study aimed to examine the correlation and correspondence between skeletal maturation indicators (SMI), cervical vertebral maturation indicators (CVMI), and radius-ulna-short bones (RUS) skeletal maturity scores in Korean adolescents, and to determine whether easily obtainable SMI or CVMI can replace the RUS skeletal maturity score. A total of 1017 participants were included with both hand-wrist radiograph and lateral cephalogram acquired concurrently. From the lateral cephalogram, CVMI was determined, through the hand-wrist radiograph, SMI was categorized, and the RUS skeletal maturity score was evaluated as well. Associations were examined using the Mann–Whitney U test, Spearman’s rank-order correlation analysis, and multiple correspondence analysis. There was no statistically significant difference in chronological age between males and females, however, the SMI, CVMI, and RUS skeletal maturity scores were significantly higher in females. The SMI, CVMI, and RUS skeletal maturity scores showed a statistically significant strong degree of both positive correlation and correspondence. However, a precisely corresponding RUS skeletal maturity score was difficult to obtain for a specific CVMI and SMI stage, implying the absence of a quantitative correlation. In conclusion, detailed evaluation should be conducted using the RUS skeletal maturity score, preferably in cases that require bone age determination or residual growth estimation.

OBJECTIVE The purpose of this study was to compare the changes induced in the pharyngeal airway space by orthodontic treatment with bodily retraction of the mandibular incisors and mandibular setback surgery without extraction. METHODS This retrospective study included 63 adult patients (32 men and 31 women). Thirty-three patients who had been treated via four-bicuspid extraction and bodily retraction of the mandibular incisors (incisor retraction, IR group) were compared with 30 patients who had been treated via mandibular setback surgery (MS group) without extraction. Lateral cephalograms were acquired and analyzed before (T1) and after treatment (T2). RESULTS The superior pharyngeal airway space did not change significantly in either group during treatment. The middle pharyngeal airway space decreased by 1.15 ± 1.17 mm and 1.25 ± 1.35 mm after treatment in the IR and MS groups, respectively, and the decrease was comparable between the two groups. In the MS group, the inferior pharyngeal airway space (E-IPW) decreased by 0.88 ± 1.67 mm after treatment (p < 0.01). The E-IPW was larger in the MS group than in IR group at T1, but it did not differ significantly between the two groups at T2. No significant correlation was observed between changes in the pharyngeal airway space and the skeletal and dental variables in each group. CONCLUSIONS The middle pharyngeal airway space decreased because of the posterior displacement of the mandibular incisors and/or the mandibular body. The E-IPW decreased only in the MS group because of the posterior displacement of only the mandibular body.

The application of 3D imaging is at its cusp in craniofacial diagnosis and treatment planning. However, most applications are limited to simple subjective superimposition-based analysis. As the diagnostic accuracy dictates the precision in operability, we propose a novel method that enables objective clinical decision making for patients with mandibular asymmetry. We analyzed cone-beam computed tomography (CBCT) scans of 34 patients who underwent surgical correction for mandibular asymmetry using a high-throughput computing algorithm. Radiomic segmentation of quantitative features of surface and volume followed by exploration resulted in identification of a computed modified absolute mandibular midsagittal plane (cmAMP). Tomographic similarity scan (ToSS) curves were generated via bilateral equidistant scanning in an antero-posterior direction with cmAMP as the reference. ToSS comprised of a comprehensive similarity index (SI) score curve and a segment-wise volume curve. The SI score was computed using the Sørensen-Dice similarity coefficient ranging from 0 to 1. The volumetric analysis was represented as the non-overlapping volume (NOV) and overlapping volume (OV) for each segment, with two segmentation lines, at the mental foramen anteriorly and the intraoral vertical ramus osteotomy region posteriorly. Statistical analysis showed strong negative correlation between the NOV and SI scores for the anterior, middle, and total mandible (P 0.001). Additionally, a significant correlation was observed between the change in the SI scores for anterior (P = 0.044) and middle segments (P 0.001) to the total mandible when comparing the data before and after the surgery. This work demonstrated the potential of incorporating ToSS curves in surgical simulation software to improve precision in the clinical decision-making process.

OBJECTIVE The aim of this study was to compare recycled and unused orthodontic miniscrews to determine the feasibility of reuse. The comparisons included both miniscrews with machined surfaces (MS), and those with etched surfaces (ES). METHODS Retrieved MS and ES were further divided into three subgroups according to the assigned recycling procedure: group A, air-water spray; group B, mechanical cleaning; and group C, mechanical and chemical cleaning. Unused screws were used as controls. Scanning electron microscopy, energy-dispersive X-ray spectrometry, insertion time and maximum insertion torque measurements in artificial bone, and biological responses in the form of periotest values (PTV), bone-implant contact ratio (BIC), and bone volume ratio (BV) were assessed. RESULTS Morphological changes after recycling mainly occurred at the screw tip, and the cortical bone penetration success rate of recycled screws was lower than that of unused screws. Retrieved ES needed more thorough cleaning than retrieved MS to produce a surface composition similar to that of unused screws. There were no significant differences in PTV or BIC between recycled and unused screws, while the BV of the former was significantly lower than that of the latter (p < 0.05). CONCLUSIONS These results indicate that reuse of recycled orthodontic miniscrews may not be feasible from the biomechanical aspect.

Purpose Few studies have evaluated the relapse pattern of intraoral vertical ramus osteotomy (IVRO) for the correction of mandibular prognathism with a high angle. The aim of this study was to measure the association between vertical facial types (high and normal mandibular plane angle) and relapse after IVRO for the management of mandibular prognathism. Materials and Methods The retrospective cohort study sample (skeletal Class III patients) was divided into 2 groups according to the angle of the sella-nasion plane relative to the mandibular plane (SN-MP) at the initial examination. Lateral cephalograms were analyzed for the predictor (facial type) and outcome (cephalometric changes over time) variables before surgery, 7 days after surgery, and 12 months after surgery. The 2 groups were matched for sample size (n = 20 in each). Data were analyzed using repeated-measures analysis of variance with Bonferroni correction. Results The normal-angle group (group N, SN-MP from 27° to 37°) and high-angle group (group H, SN-MP >37°) were not significantly different in terms of gender and age at the initial examination. Seven days after surgery, the mandibles in group H moved 2.5 mm more superiorly than those in group N (P = .013); consequently, the amount of overbite correction in group H was approximately 2 mm greater than that in group N (P = .002). Nevertheless, 12 months after surgery, there was no statistically significant difference in relapse of the maxilla and mandible between the 2 groups. In the 2 groups, the mandible moved approximately 0.7 mm superiorly during retention. Conclusions These findings suggest that IVRO is a clinically acceptable and stable treatment modality for mandibular prognathism with a high angle.

The aim of this study was to evaluate differences in the maxillary sinus floor levels between adults with an anterior open bite and those without.This retrospective study included 30 subjects: 15 adults with an anterior open bite (mean age, 21.5 ± 4.3 years) and 15 control subjects with normal occlusion (mean age, 21.7 ± 3.1 years). Cone-beam computed tomography and lateral cephalograms were analyzed before treatment.The open-bite group exhibited a significantly greater maxillary posterior alveolar height (P 0.05). The craniocaudal heights of the maxillary sinus in the region between the first and second molars and between the second premolar and first molar were significantly greater in the open bite group (40.5 and 39.0 mm, respectively) than in the control group (36.7 and 34.7 mm, respectively; P 0.05 for both). The basal bone heights in the regions between the first and second molars, the second premolar and first molar, and the first and second premolars were significantly smaller in the open-bite group than in the control group (P 0.001 for all).Vertical pneumatization of the maxillary sinus floor in the region between the first and second molars and between the second premolar and first molar is greater in adults with an anterior open bite than in those without, whereas basal bone height in the maxillary posterior region is lower in the open-bite patients.

The few studies on craniofacial complex changes in adults have reported contradictory findings. The aim of this study was to radiographically evaluate changes in the craniofacial complex and alveolar bone height of young adults over a 4-year period. This prospective study included 82 young adults (62 men; mean age, 19.0 ± 0.8 years; 20 women; mean age, 18.8 ± 0.9 years). Three radiographic examinations were performed longitudinally: the first (T0) was conducted at the start of the study, the second (T1) was conducted 2 years later, and the third (T2) was conducted at the end of the study period. As part of these examinations, lateral cephalograms, maxillary and mandibular anterior periapical radiographs, and bilateral posterior bitewing radiographs were obtained. During the 4-year follow-up period, all linear cephalometric measurements were significantly greater in men than in women. The amount of increase in the anterior facial height between T1 and T2 was lower in women than in men (P = 0.029). The rate of uprighting of the upper incisors was lower in men than in women over time (P = 0.020). The apex of the nose moved inferiorly between T0 and T2 (P = 0.006). The average overall change in the alveolar bone height was 0.27 mm and the yearly change was 0.07 mm over the 4-year period (P< 0.001). Significant changes in the skeletal, dental, and soft tissue, as well as, natural changes in alveolar bone, occur in young adults over time. Clin. Anat. 29:1011-1017, 2016. © 2016 Wiley Periodicals, Inc.

Objective The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss.

Evaluation of facial asymmetry generally involves landmark-based analyses that cannot intuitively assess differences in three-dimensional (3D) stereoscopic structures between deviation and non-deviation sides. This study tested a newly developed similarity index that uses a mirroring technique to intuitively evaluate 3D mandibular asymmetry, and characterised the resulting lower facial soft tissue asymmetry. The similarity index was used to evaluate asymmetry before and after surgery in 46 adult patients (27 men, 19 women; age, 22 ± 4.8 years) with skeletal Class III malocclusion and facial asymmetry who underwent conventional bimaxillary orthognathic surgery. Relative to the midsagittal plane used as the reference plane, the non-overlapping volume of the mandible significantly decreased, and the similarity index significantly increased after surgery. Similarity indexes of the mandible and lower facial soft tissue were strongly negatively correlated with non-overlapping volumes of each measurement. Differences in bilateral hemi-mandibular and hemi-lower facial soft tissue surface and volume measurements before surgery were significantly negatively correlated with similarity indexes of the mandible before and after surgery. This newly developed similarity index and non-overlapping volume using a mirroring technique can easily and intuitively evaluate overall 3D morphological discrepancies, especially 3D mandibular asymmetry, before and after surgery in skeletal Class III patients with facial asymmetry.

The aim of this research was to verify that ultraviolet light (UV)-photofunctionalization improves the success rate and biomechanical stability of miniscrews regardless of length, and to evaluate the comparability of biomechanical stability between UV-photofunctionalized miniscrews with short lengths and untreated miniscrews with conventional lengths.Eight male beagles (age, 12-15 months; weight, 10-13 kg) received a total of 64 miniscrews, including 7-mm and 4-mm untreated and UV-photofunctionalized, acid-etched miniscrews with the use of a random block design. The cumulative success rates were examined in all studied groups. The insertion and removal torques and screw mobility were measured. Microcomputed tomographic scans and histomorphometric analyses were performed at 8 weeks postoperatively.The success rates of 7-mm UV-untreated and UV-photofunctionalized miniscrews were 87.5% and 100%, respectively, vs 43.8% for the 4-mm UV-untreated and 4-mm UV-photofunctionalized miniscrews. The rates were significantly different in accordance with the length (P 0.001). There were no differences in the insertion and removal torque and screw mobility between groups according to the length or UV treatment. However, the 4-mm UV-untreated miniscrews yielded a mean bone area ratio of 6.35 ± 7.43%, whereas the 7-mm UV-photofunctionalized miniscrew yielded a mean ratio of 32.17 ± 8.34% (P = 0.037).The UV-photofunctionalization significantly increased the biomechanical stability and led to increased bone and miniscrew contact area in dogs with miniscrews of the same length. However, the most important factor that affected the success rate of the miniscrew was the length.

Introduction We evaluated soft-tissue thickness changes after bimaxillary surgery according to vertical facial patterns in patients with skeletal Class III malocclusion with mandibular prognathism. Methods Forty-three Korean patients (16 men and 27 women; mean age, 22.6 ± 4.1 years) with skeletal Class III malocclusion who underwent bimaxillary surgery were divided into 2 groups: normal-angle group (N group) and high-angle group (H group), on the basis of the presurgical angle of the mandibular plane relative to the sella-nasion plane (SN-MP). Changes in hard-tissue landmarks and soft-tissue thickness before and after surgery were analyzed from reconstructed 3-dimensional cone-beam computed tomography images. Postoperative soft-tissue thickness in both groups was compared with that in 40 patients with normal skeletal Class I malocclusion in the reference group. Results Group N (27°-37°) and group H (>37°) did not differ significantly in terms of sex and age before surgery. Preoperative pogonion (Pog) thickness was significantly less in group H (9.7 ± 1.6 mm) than in group N (10.8 ± 1.9 mm) (P = 0.042). Adjusted multiple linear regression analysis showed a weak positive linear relationship between the SN-MP before surgery and soft-tissue Pog thickness change (R2 of 0.361; P = 0.001) after surgery, but the area below the lower lips was not completely normalized despite surgery. Conclusions The thickness of the soft-tissue Pog may increase slightly after surgery in patients with skeletal Class III malocclusion with a higher preoperative mandibular plane angle, but normalization in the area cannot be completely achieved despite surgery.

Objective: The purpose of this study was to analyze stress distributions in the roots, periodontal ligaments (PDLs), and bones around cylindrical and tapered miniscrews inserted at different angles using a finite element analysis. Methods: We created a three-dimensional (3D) maxilla model of a dentition with extracted first premolars and used 2 types of miniscrews (tapered and cylindrical) with 1.45-mm diameters and 8-mm lengths. The miniscrews were inserted at 30°, 60°, and 90° angles with respect to the bone surface. A simulated horizontal orthodontic force of 2 N was applied to the miniscrew heads. Then, the stress distributions, magnitudes during miniscrew placement, and force applications were analyzed with a 3D finite element analysis. Results: Stresses were primarily absorbed by cortical bone. Moreover, very little stress was transmitted to the roots, PDLs, and cancellous bone. During cylindrical miniscrew insertion, the maximum von Mises stress increased as insertion angle decreased. Tapered miniscrews exhibited greater maximum von Mises stress than cylindrical miniscrews. During force application, maximum von Mises stresses increased in both groups as insertion angles decreased. Conclusions: For both cylindrical and tapered miniscrew designs, placement as perpendicular to the bone surface as possible is recommended to reduce stress in the surrounding bone.

Objective: To evaluate the stability of nonsurgical miniscrew-assisted rapid maxillary expansion (MARME) in young adults with a transverse maxillary deficiency. Materials and Methods: From a total of 69 adult patients who underwent MARME followed by orthodontic treatment with a straight-wire appliance, 20 patients (mean age, 20.9 ± 2.9 years) with follow-up records (mean, 30.2 ± 13.2 months) after debonding were selected. Posteroanterior cephalometric records and dental casts were obtained at the initial examination (T0), immediately after MARME removal (T1), immediately after debonding (T2), and at posttreatment follow-up (T3). Results: Suture separation was observed in 86.96% of subjects (60/69). An increase in the maxillary width (J-J; 1.92 mm) accounted for 43.34% of the total expansion with regard to the intermolar width (IMW) increase (4.43 mm; P < .001) at T2. The amounts of J-J and IMW posttreatment changes were −0.07 mm (P > .05) and −0.42 mm (P = .01), respectively, during retention. The postexpansion change in middle alveolus width increased with age (P < .05). The postexpansion change of interpremolar width (IPMW) was positively correlated with the amount of IPMW expansion (P < .05) but not with IMW. The changes of the clinical crown heights in the maxillary canines, first premolars, and first molars were not significant at each time point. Conclusions: Nonsurgical MARME can be a clinically acceptable and stable treatment modality for young adults with a transverse maxillary deficiency.

Objective: The aims of this study were to assess the direction and degree of lip-line cant in Korean adult orthodontic patients and to identify the effects of sex and age on changes in the cant severity. Methods: In this cross-sectional retrospective study, lip-line cant was measured in the frontal photographs of 585 Korean patients (92 men and 493 women) aged 18−48 years. The outcome variables (direction and degree of lip-line cant) were assessed in terms of predictor variables (sex, age, sagittal skeletal relationship, and menton deviation angle). Results: The direction of lip-line cant did not differ according to sex, age, or skeletal classification. Patients had 1.6 o of lip-line cant on average before orthodontic treatment. Middle-aged adults displayed a significant trend toward a lower degree of lip-line cant compared to younger adults (p < 0.01). Multiple linear regression analysis showed that the degree of lip-line cant was weakly negatively correlated with age (p < 0.001). Conclusions: While the direction of lip-line cant did not differ according to the parameters explored here, the degree of cant was correlated with age in adults, independent of menton deviation. Specifically, middle-aged adults tended to display significantly lower degrees of lip-line cant than did younger adults. [Korean J Orthod 2016;46(2):81-86]

Postoperative skeletal and dental changes were evaluated in patients with mandibular prognathism who underwent mandibular setback surgery using an intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontic treatment.This retrospective cohort study included consecutive patients with skeletal Class III malocclusions who underwent IVRO. Patients treated with pre-orthodontic orthognathic surgery (POGS) were compared with patients treated with conventional surgery (CS) with presurgical orthodontics (control) using lateral cephalograms (taken preoperatively, 7 days postoperatively, and 12 months postoperatively). Predictor (group and timing), outcome (cephalometric measurements over time), and other (ie, baseline characteristics) variables were evaluated to determine the differences in postoperative horizontal and vertical positional changes of the mandible, such as point B. Baseline demographics were similar between the groups (N = 37; CS group, n = 17; POGS group, n = 20). The data were analyzed with an independent t test, the Mann-Whitney U test, the Fisher exact t test, Pearson correlation analysis, and simple linear regression analysis.The mean setback of the mandible at point B was similar, but the mandible of the POGS group, particularly the distal segment, moved superiorly during the postoperative period in conjunction with the removal of premature occlusal contacts (P.001). In the CS group, the mandible had significantly more backward movement 12 months after surgery compared with the POGS group (P.01). In the POGS group, horizontal and vertical postsurgical changes were linearly correlated with the amount of setback and vertical movement of the mandible.Mandibular setback surgery using IVRO without presurgical orthodontics leads to considerably different postoperative skeletal and dental changes compared with conventional treatment, with more superior movement being observed at point B during the 1-year postoperative period.

In this study, we aimed to assess the surface characteristics and the biomechanical stability of miniscrews with an anodic oxidized surface compared with machined surface miniscrews in beagle dogs.Self-drilled, titanium-aluminum-vanadium alloy miniscrews with an anodic oxidized surface (n = 48) or a machined surface (n = 48) were placed into the mandibles of 12 beagle dogs. The surface characteristics of both types of miniscrews were analyzed before implantation with scanning electron microscopy and atomic force microscopy. Insertion torque was measured during placement of all 96 miniscrews. Half of the implants in each group (24 specimens per subgroup) received 200 to 250 g of tensile force for 3-week or 12-week loading periods. Removal torque was measured in 12 specimens of each subgroup, and bone-implant contact and bone volume were quantified in the other 12 specimens of each subgroup.Atomic force microscopy measurements demonstrated that the anodic oxidized surface miniscrews had significantly higher roughness parameters than did the machined surface miniscrews (P 0.001). The 2 types of miniscrews were not significantly different in insertion and removal torque values or in bone-implant contacts and bone volumes, regardless of the loading period.Anodic oxidized miniscrews have different surface roughness profiles but no clinically significant superiority in biomechanical stability compared with machined surface miniscrews.

Odontogenic keratocysts (OKCs) are one of the most aggressive cysts in the oral and maxillofacial area because of their high recurrence rate and infiltrative behavior. In growing patients with OKCs, a radical treatment approach might cause numerous complications, including the disturbance of jaw growth and loss of the involved tooth. This case report describes successful comprehensive orthodontic treatment combined with marsupialization of the cyst in a young girl who exhibited an OKC with impacted teeth. The 10-year-old girl presented with an OKC extending from the mandibular symphysis through the left mandibular body, with ectopic impaction of the mandibular left canine and first premolar, as well as congenitally missing bilateral mandibular second premolars. Interestingly, spontaneous improvement of the positions of the ectopic impacted teeth, along with a reduction in the size of the cyst, occurred during marsupialization. The sequential use of removable and fixed appliances enabled orthodontic traction of the impacted teeth. The treatment outcome was stable at 2.5 years after the end of the treatment. We speculate that comprehensive orthodontic treatment combined with marsupialization can be an effective treatment strategy for patients with OKCs, especially when they are encountered in young, growing patients with impacted teeth.

Important aspects of orthognathic surgery are the effects of skeletal movement and changes in the position of the hyoid bone, tongue, soft palate, and dimensions of the pharyngeal airway. Our aims were to evaluate the 3-dimensional changes in the pharyngeal airway and in the position of the hyoid bone after mandibular setback in 30 patients who were diagnosed with mandibular prognathism and were treated by intraoral vertical ramus osteotomy (IVRO). Three-dimensional cone-beam computed tomographic (CT) images were obtained preoperatively, one month postoperatively, and one year postoperatively. The total pharyngeal volume decreased between the preoperative state and one month and one year afterwards. The hyoid bone had moved 2.0 mm posteriorly and 3.15 mm superiorly by one month postoperatively. The position of the hyoid bone was affected by changes in posterior and superior movement of the B point at one month (r = 0.44, p = 0.015 and R = 0.63, p = 0.000, respectively) and also by superior movement of the B point at one year (r = 0.57, p = −0.001). There was an advantageous relation between posterior positional changes in the B point (mandibular setback), and volumetric changes in the hypopharyngeal and total pharyngeal airway, so maxillofacial surgeons should consider the reduction in airway when planning excessive mandibular setback.

Objectives: To identify unique characteristics of the craniofacial complex and dental maturity in girls with central precocious puberty (CPP). Materials and Methods: This study included 34 Korean girls with idiopathic CPP (mean age, 8.6 ± .5 years) and 28 normal healthy girls of the same chronological age. An initial evaluation of the growth pattern of the craniofacial complex and dental maturity was conducted by analyzing lateral cephalometric and panoramic radiographs. Results: The mandibular ramus height (44.4 ± 4.1 mm) and total mandibular length (10.8 ± 4.3 mm) (P = .004 and .021, respectively) were greater and the lower anterior facial height was lesser (63.2 ± 2.4 mm) (P = .040) in the CPP group than in the reference group. In addition, the gonial angle (12.9 ± 6.1°; P = .045) and the mandibular plane angle (34.9 ± 4.8°; P = .012) were smaller in girls with CPP than in normal healthy girls. All the mandibular teeth were more mature in girls with CPP (P < .001). A strong positive correlation was observed between the mandibular tooth formation stages and the presence of CPP in girls (r = .756 to .957; P < .001). Conclusions: CPP had an effect on the anteroposterior growth of the mandible in the craniofacial complex and the rotation of the mandibular plane angle. Early maturation of the mandibular teeth was observed in girls with CPP.

Based on three-dimensional scanning and computer-aided design and computer-aided manufacturing (CAD/CAM) techniques, customized bracket systems are increasingly used. However, data remain limited regarding customized bracket design, characteristics, and stability. This study was undertaken to evaluate the design, bond strength, and residual adhesives of four different CAD/CAM customized brackets that were attached to human tooth specimens by indirect bonding. Thirty extracted human upper premolars were divided into five groups: Group 1, preadjusted self-ligating labial metal bracket; Group 2, lingual self-ligating metal injection molding customized bracket; Group 3, gold-casted lingual customized bracket; Group 4, labial self-ligating milled customized bracket; Group 5, labial customized resin base bracket. Except in Group 1, premolar specimens were scanned via model scanner, and the images were sent to each manufacturing company to fabricate customized brackets and transfer trays/jigs. Debonding force (DF; N) was measured by Instron universal testing machine and shear bond strength (SBS; MPa) was calculated via dividing DF by bonding area. Adhesive remnants were analyzed via stereo microscopic images. Group 2 (196.90±82.75 N) exhibited significantly higher DF than Group 1 (62.77±12.65 N); other groups exhibited similar DFs, compared with Group 1. No customized bracket groups exhibited significant differences in SBS, relative to Group 1 (6.73±1.36 MPa). However, SBS in Group 5 (11.46±7.22 MPa) was significantly higher than in Group 3 (3.58±2.14 MPa). Group 3 had significantly lower ARI scores than other groups (P

Objective. We investigated the suitability of intraoral-scan models for measuring tooth dimensions and the amount of crowding in patients with severe tooth crowding. Materials and Methods. Fifty-eight patients who had undergone intraoral scans for diagnosis were included. Cast models were divided into two groups depending on the amount of crowding, as determined by initial caliper-based measurements (mild crowding [MC] group: 4.5 mm). Twenty maxillary models and 20 mandibular models were used in this study. For the three types of models (i.e., IS digital model, C cast model, and CS digital model), the reproducibility and the precision of linear measurements were evaluated. Results. We found that linear measurements made using digital calipers on a plaster model and on the relevant software were reproducible. There was no significant difference in most linear measurements between digital models and the C model. There were differences in the amount of crowding (p<.05), although these were not clinically significant. There was no relationship between the precision of crowding in the three types of models and the severity of crowding. Conclusions. Digital models can be used for measuring crowding in both mild and severe crowding cases. However, crowding measured by digital models tends to be lesser than that measured by cast models, and this should be considered during clinical application.

Objective. The aim of this study was to evaluate the morphological characteristics of the palatal rugae in Korean subjects to determine whether the palatal rugae can be used as an appropriate reference area for three-dimensional digital model superimpositions. Materials and Methods. In total, 343 patients (110 men, 233 women; mean age, 25.6±8.2 years) who had a digital model taken at their initial visit were included, and the numbers and types of right and left palatal rugae were investigated according to the primary, secondary, and fragmentary rugae. Finally, the differences in the positions of the third primary ruga were investigated according to the presence of additional rugae posterior to the third primary ruga. Results. The number of primary palatal rugae ranged from one to six, with 43.5% of the subjects having three primary rugae and 36.1% having four primary rugae; there were no significant differences between sexes. Except for the fragment rugae, the numbers of primary and secondary rugae were not significantly different between the left and right sides. The third primary ruga was located more significantly anteriorly when there was an additional ruga posterior to the third primary ruga (P < 0.001). Conclusions. The numbers of the palatal rugae vary greatly among individuals, and this affects the anteroposterior position of the third primary ruga. When the third primary ruga is located anteriorly, care should be taken when using it as a reference area for superimposition with a digital model before and after orthodontic treatment.

The aim of this study was to assess the association between malocclusion and oral health-related quality of life in young adults without orthodontic treatment, controlling for sociodemographic factors and common oral diseases.The sample consisted of 429 Korean patients (328 men, 101 women) 18 to 32 years of age. They completed the Korean version of the oral health impact profile-14 questionnaire and had a clinical examination, including an assessment with the index of orthodontic treatment need-dental health component. We collected sociodemographic information (age, sex, and education level) and evaluated other common oral diseases (decayed, missing, and filled teeth; periodontal health status; temporomandibular disorder; and oral soft tissue diseases).Multiple logistic regression analysis showed that patients requiring extensive orthodontic treatment were more than 2.7 times as likely to have poor oral health-related quality of life as the corresponding "no treatment needed" reference group (odds ratio, 2.74; 95% confidence interval, 1.60-4.59; P0.001). Severe malocclusion is significantly associated with functional limitations, physical pain, and social disability in young adults.Malocclusion is a key factor associated with poor quality of life caused by limited oral function, pain, and social disability in young adults.

Objective: To compare soft and hard tissue responses based on the degree of maxillary incisor retraction using maximum anchorage in patients with Class II division 1 malocclusion. Materials and Methods: This retrospective study sample was divided into moderate retraction ( Results: There were 2.3 mm and 3.0 mm of upper and lower lip retraction, respectively, in the moderate group; and 4.0 mm and 5.3 mm, respectively, in the maximum group. In the moderate group, the upper lip was most influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.94). The lower lip was most influenced by posterior movement of B-point (β = 0.84) and the cervical point of the mandibular incisor (β = 0.83). Prediction was difficult in the maximum group; no variable showed a significant influence on upper lip changes. The lower lip was highly influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.50), but this correlation was weak in the maximum group. Conclusions: Posterior movement of the cervical point of the anterior teeth is necessary for increased lip retraction. However, periodic evaluation of the lip profile is needed during maximum retraction of the anterior teeth because of limitations in predicting soft tissue responses.

Objective To evaluate differences in skeletal maturity in relation to vertical facial types and to compare differences in the skeletal maturity of the cervical vertebrae and hand-wrist in females. Methods This study included 59 females aged 7 to 9 years with skeletal Class I malocclusion. The participants were categorized into three groups (low, normal, and high) according to the mandibular plane angle. Skeletal maturity was measured using skeletal maturity indicators (SMIs) and the Tanner-Whitehouse III (TW3) method on hand-wrist radiographs and by using cervical vertebrae maturation indicators (CVMIs) on lateral cephalometric radiographs. Results The SMI was higher in the high-angle group than in the low-angle group (p = 0.014). The median TW3 bone age was 11.4 months higher in the high-angle group than in the low-angle group (p = 0.032). There was no significant difference in CVMI among the three groups. Skeletal maturity showed a weakly positive correlation with the mandibular plane angle (SMI, r = 0.391; TW3, r = 0.333; CVMI, r = 0.259). Conclusions The skeletal maturity of the hand-wrist in females with a high mandibular plane angle was higher than that in females with a low mandibular plane angle. Obtaining additional hand-wrist radiographs may facilitate evaluation of skeletal maturity of females. In females with a high mandibular angle, the time to commence orthodontic treatment may be earlier than that in females with a low mandibular angle.

Nongrowing adult patients with skeletal open bite have been considered among the most difficult to treat. This case report describes the surgical-orthodontic treatment of a blind 20-year-old woman who presented with skeletal class II malocclusion with vertical maxillary excess, anterior open bite, and transverse maxillary deficiency.After the transverse maxillary deficiency was corrected with miniscrew-assisted rapid palatal expansion, Le Fort I osteotomy with anterior segmental osteotomy and bilateral sagittal split ramus osteotomy with advancement genioplasty were used to correct the vertical maxillary excess and the anterior open bite. The patient's facial appearance was markedly improved, and she achieved a functional and stable occlusion after these treatments.This case report demonstrates the efficiency of miniscrew-assisted rapid palatal expansion for a patient with transverse maxillary deficiency and the benefit of a team approach using effective orthodontic mechanics in orthognathic surgery to correct a severe dentofacial deformity.

Objective To evaluate transverse skeletal and dental changes, including those in the buccolingual dental axis, between patients with skeletal Class III malocclusion and facial asymmetry after bilateral intraoral vertical ramus osteotomy with and without presurgical orthodontic treatment. Methods This retrospective study included 29 patients with skeletal Class III malocclusion and facial asymmetry including menton deviation > 4 mm from the midsagittal plane. To evaluate changes in transverse skeletal and dental variables (i.e., buccolingual inclination of the upper and lower canines and first molars), the data for 16 patients who underwent conventional orthognathic surgery (CS) were compared with those for 13 patients who underwent preorthodontic orthognathic surgery (POGS), using three-dimensional computed tomography at initial examination, 1 month before surgery, and at 7 days and 1 year after surgery. Results The 1-year postsurgical examination revealed no significant changes in the postoperative transverse dental axis in the CS group. In the POGS group, the upper first molar inclined lingually on both sides (deviated side, -1.8° ± 2.8°, p = 0.044; nondeviated side, -3.7° ± 3.3°, p = 0.001) and the lower canine inclined lingually on the nondeviated side (4.0° ± 5.4°, p = 0.022) during postsurgical orthodontic treatment. There were no significant differences in the skeletal and dental variables between the two groups at 1 year after surgery. Conclusions POGS may be a clinically acceptable alternative to CS as a treatment to achieve stable transverse axes of the dentition in both arches in patients with skeletal Class III malocclusion and facial asymmetry.