Search

Abstract Background Reverse total shoulder arthroplasty (RTSA) is commonly performed to reduce pain and restore shoulder function in patients with severe shoulder conditions. While most patients experience significant pain relief and functional improvement following surgery, a subset of patients continue to report persistent pain even two years postoperatively. The aim of this study was to identify both modifiable and non-modifiable preoperative factors that contribute to the risk of persistent postsurgical pain after RTSA. By understanding these factors, clinicians can better anticipate which patients are at higher risk and develop tailored preoperative and postoperative pain management strategies to improve overall outcomes. Methods In this retrospective cohort study, 703 patients with complete data undergoing primary RTSA performed between 2011 and 2022 were analyzed. Persistent postsurgical pain was defined as a pain score ≥ 3 on a numeric rating scale. Multivariable regression models were used to identify patient-related and disease-related predictors of persistent postsurgical pain. Results The cohort comprised 445 women (63%) and 258 men (37%) with a mean age of 74 ± 8 years at the time of surgery. Persistent postsurgical pain was reported by 18% of patients. Preoperative pain scores averaged 6.0 ± 2.5 on the NRS scale, which decreased to 1.2 ± 1.8 postoperatively. Key predictors included higher preoperative pain levels (β = 0.10, p

Background: The purpose of this study was to assess impingement-free internal rotation (IR) in a virtual reverse shoulder arthroplasty simulation using a Statistical Shape Model based on scapula size. Methods: A database of over 10,000 scapulae utilized for preoperative planning for shoulder arthroplasty was analyzed with a Statistical Shape Model to obtain 5 scapula sizes including the mean and 2 standard deviations. For each scapula model, one glenosphere size (33-42 mm) was selected as the best fit based on consensus among 3 shoulder surgeons. Virtual implantation variables included 1) lateral offset (0-12 mm in 2-mm increments), 2) inferior eccentricity (0, 2.5, 5, and 7.5 mm), and 3) posterior eccentricity (0, 2.5, and 5 mm). The neck shaft angle was fixed at 135° with an inlay design humeral prosthesis. IR at the side (IR0) and in abduction (IRABD) were then simulated. Results: Maximum impingement-free IR0 was reached with increasing inferior offset in combination with increasing lateralization. Lateralization was the most important variable in increasing impingement-free IRABD. Maximum IRABD was reached at 4-6 mm of lateralization with smaller scapula (−2 to 0 standard deviation). Increasing lateralization up to 12 mm continues to increase IRABD for larger-sized scapula (+1 to +2 standard deviation). Optimal inferior offset and lateralization to maximize IR did have a small loss of external rotation in neutral abduction. There was no loss of external rotation in 60° of abduction. Conclusion: In a virtual model, the glenosphere position required to maximize IR varied by scapula size. For smaller scapulae, maximum IR0 was reached with a combination of 2.5-mm inferior offset and 0- 4 mm of lateralization. For larger scapulae, maximum IR0 was reached with a combination of 2.5 mm of inferior offset and 4 mm of lateralization. The amount of lateralization required to maximize IRABD also varies by scapula size. Maximum IRABD was reached in smaller scapula with 4-6 mm of lateralization and at least 12 mm of lateralization in larger scapula. These findings may be applied in the clinical decision-making process knowing that impingement-free IR and IRABD can be maximized with combinations of inferior offset and lateralization based on scapula size with minimal effect on external rotation and external rotation in 60° of abduction.

Aims: The liner design is a key determinant of the constraint of a reverse total shoulder arthroplasty (rTSA). The aim of this study was to compare the degree of constraint of rTSA liners between different implant systems. Methods: An implant company’s independent 3D shoulder arthroplasty planning software (mediCAD 3D shoulder v. 7.0, module v. 2.1.84.173.43) was used to determine the jump height of standard and constrained liners of different sizes (radius of curvature) of all available companies. The obtained parameters were used to calculate the stability ratio (degree of constraint) and angle of coverage (degree of glenosphere coverage by liner) of the different systems. Measurements were independently performed by two raters, and intraclass correlation coefficients were calculated to perform a reliability analysis. Additionally, measurements were compared with parameters provided by the companies themselves, when available, to ensure validity of the software-derived measurements. Results: There were variations in jump height between rTSA systems at a given size, resulting in large differences in stability ratio between systems. Standard liners exhibited a stability ratio range from 126% to 214% (mean 158% (SD 23%)) and constrained liners a range from 151% to 479% (mean 245% (SD 76%)). The angle of coverage showed a range from 103° to 130° (mean 115° (SD 7°)) for standard and a range from 113° to 156° (mean 133° (SD 11°)) for constrained liners. Four arthroplasty systems kept the stability ratio of standard liners constant (within 5%) across different sizes, while one system showed slight inconsistencies (within 10%), and ten arthroplasty systems showed large inconsistencies (range 11% to 28%). The stability ratio of constrained liners was consistent across different sizes in two arthroplasty systems and inconsistent in seven systems (range 18% to 106%). Conclusion: Large differences in jump height and resulting degree of constraint of rTSA liners were observed between different implant systems, and in many cases even within the same implant systems. While the immediate clinical effect remains unclear, in theory the degree of constraint of the liner plays an important role for the dislocation and notching risk of a rTSA system. Cite this article: Bone Jt Open 2024;5(10):818–824.

Aims: Current diagnostic tools are not always able to effectively identify periprosthetic joint infections (PJIs). Recent studies suggest that circulating microRNAs (miRNAs) undergo changes under pathological conditions such as infection. The aim of this study was to analyze miRNA expression in hip arthroplasty PJI patients. Methods: This was a prospective pilot study, including 24 patients divided into three groups, with eight patients each undergoing revision of their hip arthroplasty due to aseptic reasons, and low- and high-grade PJI, respectively. The number of intraoperative samples and the incidence of positive cultures were recorded for each patient. Additionally, venous blood samples and periarticular tissue samples were collected from each patient to determine miRNA expressions between the groups. MiRNA screening was performed by small RNA-sequencing using the miRNA next generation sequencing (NGS) discovery (miND) pipeline. Results: Overall, several miRNAs in plasma and tissue were identified to be progressively deregulated according to ongoing PJI. When comparing the plasma samples, patients with a high-grade infection showed significantly higher expression levels for hsa-miR-21-3p, hsa-miR-1290, and hsa-miR-4488, and lower expression levels for hsa-miR-130a-3p and hsa-miR-451a compared to the aseptic group. Furthermore, the high-grade group showed a significantly higher regulated expression level of hsa-miR-1260a and lower expression levels for hsa-miR-26a-5p, hsa-miR-26b-5p, hsa-miR-148b-5p, hsa-miR-301a-3p, hsa-miR-451a, and hsa-miR-454-3p compared to the low-grade group. No significant differences were found between the low-grade and aseptic groups. When comparing the tissue samples, the high-grade group showed significantly higher expression levels for 23 different miRNAs and lower expression levels for hsa-miR-2110 and hsa-miR-3200-3p compared to the aseptic group. No significant differences were found in miRNA expression between the high- and low-grade groups, as well as between the low-grade and aseptic groups. Conclusion: With this prospective pilot study, we were able to identify a circulating miRNA signature correlating with high-grade PJI compared to aseptic patients undergoing hip arthroplasty revision. Our data contribute to establishing miRNA signatures as potential novel diagnostic and prognostic biomarkers for PJI. Cite this article: Bone Jt Open 2024;5(6):479–488.

Posterior shoulder instability (PSI) is less common than anterior shoulder instability, accounting for 2–12% of total shoulder instability cases. However, a much higher frequency of PSI has been recently indicated, suggesting that PSI accounts for up to 24% of all young and active patients who are surgically treated for shoulder instability. This differentiation might be explained due to the frequent misinterpretation of vague symptoms, as PSI does not necessarily present as a recurrent posterior instability event, but often also as mere shoulder pain during exertion, limited range of motion, or even as yet asymptomatic concomitant finding. In order to optimize current treatment, it is crucial to identify the various clinical presentations and often unspecific symptoms of PSI, ascertain the causal instability mechanism, and accurately diagnose the subgroup of PSI. This review should guide the reader to correctly identify PSI, providing diagnostic criteria and treatment strategies.

Abstract Background The importance of several scapulothoracic muscles, including trapezius and serratus anterior, in maintaining physiological scapula kinematics has been highlighted in the past. However, the relationship between the scapula and the latissimus dorsi muscle remains unclear. Our clinical surgical observation is that the latissimus dorsi does not directly attach but rather runs superficial to the inferior angle of the scapula. Based on this observation, we hypothesise that the latissimus dorsi creates a dynamic track on which the scapula glides under the muscle belly during elevation of the arm, creating the latissimus-scapula overlap (LSO). Methods All consecutive patients who had a whole-body computed tomography scan (CT) in case of polytrauma evaluation between 2018 and 2021, with complete depiction of the scapula and latissimus dorsi muscle, were analysed. 150 shoulders in 90 patients with arms up were matched according to their age (within five years), gender, and affected side with 150 shoulders in 88 patients with arms down. Patients with pathologies of the upper extremities or thorax that potentially could alter LSO measurements were excluded. LSO was calculated as a ratio of the measured area of the latissimus dorsi projection on the scapula and the total scapula area. Results The mean age of the 178 patients (48 females; 13 males) was 60 years. The arms-up group showed a significantly higher LSO than the arms-down group (19.9 ± 6.3% vs. 2.7 ± 2.2%; p

Background: Improvements in pain control after shoulder arthroplasty with a reduction in narcotic use continues to be an important postoperative goal. With the increased utilization of stemless anatomic total shoulder arthroplasty (aTSA), it is relevant to compare between stemmed and stemless arthroplasty to assess if there is any association between this implant design change and early postoperative pain. Methods: Patients from a multicenter, prospectively-maintained database who had undergone a stemless aTSA with a minimum of two year clinical follow-up were retrospectively identified. Patients who underwent aTSA with a short stem were identified in the same registry, and matched to the stemless aTSA patients by age, sex and preoperative pain score. The primary study outcome was the Visual Analog Scale pain score. Secondary pain outcomes were the American Shoulder and Elbow Surgeons shoulder pain subscore, Western Ontario Osteoarthritis of the Shoulder physical symptoms subscore, and the Single Assessment Numeric Evaluation score. Finally, the percentage of patients who could sleep on the affected shoulder was assessed for each group. These pain-related clinical outcomes were assessed and compared preoperatively, and postoperatively at 9 weeks, 26 weeks, one year and two years. For all statistical comparisons, P > .05 was considered significant. Results: 124 patients were included in the study; 62 in each group. At 9 weeks after surgery, statistically significantly improved pain control was reported by patients undergoing stemless aTSA, as assessed by the Visual Analog Scale (stemless: 1.5, stemmed: 2.5, P = .001), American Shoulder and Elbow Surgeons pain subscore (stemless: 42.4, stemmed: 37.3, P

Background: Increased coracoclavicular distance due to acute acromioclavicular joint (ACJ) instability is often described as a pseudoelevation of the clavicle due to inferior hanging of the scapula, while the distal clavicle remains in its position. The aim of this study was to analyze whether the elevation of the distal clavicle, depression of the scapula, or both are associated with vertical instability and to evaluate the impact of weighted stress radiographs on the clavicle and scapular position in acute ACJ instabilities. Methods: The cohort consisted of 505 patients (f = 52, m = 453; mean age 46 years) which presented to our emergency department or outpatient clinic and treated in our institution from 2006 to 2019 displaying an acute ACJ injury. The panorama views that displayed at least two vertebraes with their spinous processes were retrospectively evaluated. Two raters assessed the panorama views twice regarding the clavicular and coracoidal angle of both sides in relation to the cervicothoracal spine and the difference in height of both clavicles and coracoids. Results: In our cohort, five types of displacement were distinguished: type A, only clavicle is elevated (N = 46); B, only scapula depressed (N = 36); C, the clavicle elevated and the scapula depressed (N = 67); D, both depressed (N = 133); and E, both elevated (N = 223). 123 patients had non-weighted radiographs and 353 patients stress views with 10 kg of axial load, whereas 29 patients had both radiological modalities. Among these 29 patients, a significant increase in coracoclavicular distance difference, clavicle, and scapula height (P

Abstract Background Scapulothoracic orientation, especially scapular internal rotation (SIR) may influence range of motion in reverse total shoulder arthroplasty (RTSA) and is subjected to body posture. Clinical measurements of SIR rely on apical bony landmarks, which depend on changes in scapulothoracic orientation, while radiographic measurements are often limited by the restricted field of view (FOV) in CT scans. Therefore, the goal of this study was (1) to determine whether the use of CT scans with a limited FOV to measure SIR is reliable and (2) if a clinical measurement could be a valuable alternative. Methods This anatomical study analyzed the whole-body CT scans of 100 shoulders in 50 patients (32 male and 18 female) with a mean age of 61.2 ± 20.1 years (range 18; 91). (1) CT scans were rendered into 3D models and SIR was determined as previously described. Results were compared to measurements taken in 2D CT scans with a limited FOV. (2) Three apical bony landmarks were defined: (the angulus acromii (AA), the midpoint between the AA and the coracoid process tip (C) and the acromioclavicular (AC) joint. The scapular axis was determined connecting the trigonum scapulae with these landmarks and referenced to the glenoid center. The measurements were repeated with 0°, 10°, 20°, 30° and 40° anterior scapular tilt. Results Mean SIR was 44.8° ± 5.9° and 45.6° ± 6.6° in the 3D and 2D model, respectively (p

Background: Metallic humeral and glenoid lateralized implants have been developed to prevent common problems that can emerge using Grammont’s concept (ie, medialization of center of rotation, decreased humeral offset, scapular notching) in reverse shoulder arthroplasty. The purpose of this study was to evaluate the clinical and radiological results of metallic humeral and glenoid lateralized implants for cuff tear arthropathy (CTA) and primary osteoarthritis (OA). Methods: In this prospective study, patients with CTA or OA who underwent reverse shoulder arthroplasty using augmented base plates for glenoid lateralization and a “curved stem” design for the humeral side were included. The Constant-Murley score and Subjective Shoulder Value were documented at 1- and 2-year follow-ups. Radiographs were reviewed for scapular notching, instability, loosening, osteolysis, ossification, bone resorption, or fractures. Lateralization and distalization shoulder angles were evaluated at the final follow-up. Results: There were 23 patients with CTA and 19 patients with OA (27 women; mean age, 76 years; range, 59-85) available for examination at 2 years. Both groups increased significantly in all outcome measures compared with baseline (P

Irreparable supraspinatus tendon tears are challenging to treat, especially in a young and high-demanding patient population. Whereas interposition tendon grafting and partial repair are limited by the quality of the remaining rotator cuff tendons and muscles, superior capsular reconstruction and subacromial spacers do not provide the active biomechanical principle of a contracting supraspinatus. The purpose of this technical note is to introduce an arthroscopic middle trapezius transfer below the acromion to replace the former supraspinatus unit. This technique might combine the benefits of both the static concepts seen with subacromial spacers or superior capsular reconstruction and dynamic concepts such as interposition grafting and partial repairs.

Abstract Purpose The purpose of this study was to investigate the anatomical feasibility of a middle trapezius transfer below the acromion for treatment of irreparable supraspinatus tendon tears. Methods This study involved 20 human cadaveric shoulders in 10 full‐body specimens. One shoulder in each specimen was dissected and assessed for muscle and tendon extent, force vectors, and distance to the neurovascular structures. The opposite shoulder was used to evaluate the surgical feasibility of the middle trapezius transfer via limited skin incisions along with an assessment of range of motion and risk of neurovascular injury following transfer. Results The harvested acromial insertion of the middle trapezius tendon showed an average muscle length of 11.7 ± 3.0 cm, tendon length of 2.7 ± 0.9 cm, footprint length of 4.3 ± 0.7 cm and footprint width of 1.4 ± 0.5 cm. The average angle between the non‐transferred middle trapezius transfer and the supraspinatus was 33 ± 10° in the transversal plane and 34 ± 14° in the coronal plane. The mean distance from the acromion to the neurovascular bundle was 6.3 ± 1.3 cm (minimum: 4.0 cm). During surgical simulation there was sufficient excursion of the MTT without limitation of range of motion in a retracted scapular position but not in a protracted position. No injuries to the neurovascular structures were noted. Conclusion Transfer of the acromial portion of the middle trapezius for replacement of an irreparable supraspinatus seems to be feasible in terms of size, vector, excursion, mobility and safety. However, some concern regarding sufficiency of transfer excursion remains as scapula protraction can increase the pathway length of the transfer. Level of evidence Basic Science Study/Anatomical Study

Irreparable rotator cuff tears are challenging to treat. Especially in younger patients without concomitant osteoarthritic changes, joint-preserving procedures are warranted. To date, no treatment guideline exists because none of the available techniques has shown superiority over the others, and long-term survivorship data are missing. The aim of the “Strings” is to provide an arthroscopic solution to anatomically reconstruct presumably irreparable rotator cuff tears by bridging the gap with multiple string-like tendon interposition autografts.

Background:. Some unfavorable local events following shoulder arthroplasty occur without the patient experiencing symptoms and yet may be detected on diagnostic imaging, thereby serving as indicators of complications that may require revision. Our aim was to create a standardized protocol for an image-based monitoring process for assessing patients who are asymptomatic following shoulder arthroplasty. Methods:. A Delphi exercise was implemented with the participation of an international panel of experienced shoulder surgeons. On the basis of expert opinion from a core steering group, an initial list of imaging parameters for shoulder arthroplasty monitoring of asymptomatic patients was developed and reviewed by panel members. The most appropriate imaging modality was identified. Between each survey, all feedback was considered in order to revise the proposed core set with its definitions and specifications. Consensus was reached upon a two-thirds agreement. Results:. Three online surveys were administered, with 98 surgeons responding to the first and/or the second survey. The response rate for the final survey was 74%. Final parameter definitions were organized in 7 categories (implant migration, radiolucency around implant and implant loosening, signs of shoulder displacement, bone resorption and formation, wear of implant articular surfaces, fractures around the implant, and implant breakage and disassembly) and approved with 85% to 100% agreement. Seventy-eight percent of the panel members agreed on a minimum radiographic imaging schedule: standard anteroposterior and axial (alternatively, Y) views made within 6 weeks after implantation and between 3 and 6 months as well as at 12 months post-surgery. Conclusions:. Our work presents a monitoring tool developed with international consensus for the assessment of asymptomatic patients after shoulder arthroplasty and including a structured core set of radiographic parameters. Clinical application and scientific evaluation of the monitoring process are needed. Clinical Relevance:. This represents a major step toward the standardization of shoulder arthroplasty radiographic monitoring for routine quality controls and research investigations.

To date, specific surgical procedures are available for the treatment of anterior shoulder instability with substantial bony glenoid defects, as well as for patients without osseous lesions. However, specific treatment options are lacking for the frequently observed small to intermediate glenoid defects, which may not necessitate glenoid reconstruction surgery according to current guidelines but can still jeopardize the outcome after mere soft-tissue stabilization procedures. This article describes the so-called arthroscopic Bankart-Plus procedure for the treatment of anterior shoulder instability with small to intermediate bony glenoid defects. In addition to the conventional capsulolabral repair, an allogeneic demineralized spongy bone matrix is inserted between the glenoid neck and the labrum with the aim of compensating for the glenoid bone loss by increasing the volume of the labrum and thus its stabilizing effect.