Search

A variety of oscillometric algorithms have been recently proposed in the literature for estimation of blood pressure (BP). However, these algorithms possess specific strengths and weaknesses that should be taken into account before selecting the most appropriate one. In this paper, we propose a fusion method to exploit the advantages of the oscillometric algorithms and circumvent their limitations. The proposed fusion method is based on the computation of the weighted arithmetic mean of the oscillometric algorithms estimates, and the weights are obtained using a Bayesian approach by minimizing the mean square error. The proposed approach is used to fuse four different oscillometric blood pressure estimation algorithms. The performance of the proposed method is evaluated on a pilot dataset of 150 oscillometric recordings from 10 subjects. It is found that the mean error and standard deviation of error are reduced relative to the individual estimation algorithms by up to 7 mmHg and 3 mmHg in estimation of systolic pressure, respectively, and by up to 2 mmHg and 3 mmHg in estimation of diastolic pressure, respectively., (Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.)

The use of automated blood pressure (BP) monitoring is growing as it does not require much expertise and can be performed by patients several times a day at home. Oscillometry is one of the most common measurement methods used in automated BP monitors. A review of the literature shows that a large variety of oscillometric algorithms have been developed for accurate estimation of BP but these algorithms are scattered in many different publications or patents. Moreover, considering that oscillometric devices dominate the home BP monitoring market, little effort has been made to survey the underlying algorithms that are used to estimate BP. In this review, a comprehensive survey of the existing oscillometric BP estimation algorithms is presented. The survey covers a broad spectrum of algorithms including the conventional maximum amplitude and derivative oscillometry as well as the recently proposed learning algorithms, model-based algorithms, and algorithms that are based on analysis of pulse morphology and pulse transit time. The aim is to classify the diverse underlying algorithms, describe each algorithm briefly, and discuss their advantages and disadvantages. This paper will also review the artifact removal techniques in oscillometry and the current standards for the automated BP monitors.

Oscillometry is a popular technique for automatic estimation of blood pressure (BP). However, most of the oscillometric algorithms rely on empirical coefficients for systolic and diastolic pressure evaluation that may differ in various patient populations, rendering the technique unreliable. A promising complementary technique for automatic estimation of BP, based on the dependence of pulse transit time (PTT) on cuff pressure (CP) (PTT-CP mapping), has been proposed in the literature. However, a theoretical grounding for this technique and a nonparametric BP estimation approach are still missing. In this paper, we propose a novel coefficient-free BP estimation method based on PTT-CP dependence. PTT is mathematically modeled as a function of arterial lumen area under the cuff. It is then analytically shown that PTT-CP mappings computed from various points on the arterial pulses can be used to directly estimate systolic, diastolic, and mean arterial pressure without empirical coefficients. Analytical results are cross-validated with a pilot investigation on ten healthy subjects where 150 simultaneous electrocardiogram and oscillometric BP recordings are analyzed. The results are encouraging whereby the mean absolute errors of the proposed method in estimating systolic and diastolic pressures are 5.31 and 4.51 mmHg, respectively, relative to the Food and Drug Administration approved Omron monitor. Our work thus shows promise toward providing robust and objective BP estimation in a variety of patients and monitoring situations.

Peripheral arterial disease (PAD) is a progressing arterial disorder that is associated with significant morbidity and mortality. The conventional PAD detection methods are invasive, cumbersome, or require expensive equipment and highly trained technicians. Here, we propose a new automated, noninvasive, and easy-to-use method for the detection of PAD based on characterizing the arterial system by applying an external varying pressure using a cuff. The superposition of the internal arterial pressure and the externally applied pressure were measured and mathematically modeled as a function of cuff pressure. A feature-based learning algorithm was then designed to identify PAD patterns by analyzing the parameters of the derived mathematical models. Genetic algorithm and principal component analysis were employed to select the best predictive features distinguishing PAD patterns from normal. A RUSBoost ensemble model using neural network as the base learner was designed to diagnose PAD from genetic algorithm selected features. The proposed method was validated on data collected from 14 PAD patients and 19 healthy individuals. It achieved a high accuracy, sensitivity, and specificity of 91.4%, 90.0%, and 92.1%, respectively, in detecting PAD. The effect of age, a confounding factor that may have impacted our analyzes, was not considered in this study. The proposed method shows promise toward noninvasive and accurate detection of PAD and can be integrated into routine oscillometric blood pressure measurements. [ABSTRACT FROM AUTHOR]

Noninvasive blood pressure (BP) measurement is an important tool for managing hypertension and cardiovascular disease. However, automated noninvasive BP measurement devices, which are usually based on the oscillometric method, do not always provide accurate estimation of BP. It has been found that change in arterial stiffness (AS) is an underlying mechanism of disagreement between an oscillometric BP monitor and a sphygmomanometer. This problem is addressed by incorporating parameters related to AS in the algorithm for BP measurement. Pulse transit time (PTT) is first used to estimate AS parameters, which are fixed into a model of the oscillometric envelope. This model can then be used to perform curve fitting to the measured signal using only four parameters: systolic BP, diastolic BP, mean BP, and lumen area at zero transmural pressure. The proposed technique is independent of the experimentally determined characteristic ratios that are commonly used in existing oscillometric methods. The accuracy of the proposed technique was evaluated by comparing with the same model without incorporation of AS, and with reference BP device measurements. The new method achieved standard deviation of error less than 8 mmHg and mean error less than 5 mmHg. The results show consistency with ANSI/AAMI SP-10 standard for noninvasive BP measurement techniques. [ABSTRACT FROM AUTHOR]

An accurate noninvasive estimation of mean arterial pressure (MAP) is of great importance in the evaluation of circulatory function and prognosis of some cardiovascular diseases. This paper proposes a novel oscillometric MAP estimation method based on the dependence of pulse transit time (PTT) on cuff pressure (CP). The PTT computed as the time interval between the electrocardiogram (ECG) R-peaks and the maximum slope points on the oscillometric pulses is mathematically modeled by considering the cuff-arm-artery system and the blood flow dynamics. It is then analytically shown that MAP can be approximated as the CP at which the PTT is maximum. Based on our theoretical findings, a new method of MAP estimation from simultaneous ECG and oscillometric blood pressure measurements is proposed. Our proposed method is validated with a pilot study in which 150 recordings from 10 subjects are analyzed. The reference MAP is computed from the systolic and diastolic pressures measured by the Food and Drug Administration-approved Omron HEM-790IT monitor using three different formulas given in the literature. The performance of our proposed method is compared with the maximum amplitude and zero-crossing methods in terms of mean error (ME), mean absolute error, and standard deviation of error (SDE). It is found that our proposed method achieves improvements of more than 20% in SDE compared with the maximum amplitude method and more than 50% in ME compared with the zero-crossing method. [ABSTRACT FROM PUBLISHER]

Oscillometry is the most common measurement method used in electronic blood pressure (BP) monitors. However, most of the existing oscillometric algorithms employ empirical ratios on the oscillometric waveform envelope (OMWE) to determine the systolic pressure (SP) and diastolic pressure (DP). As these algorithms do not consider the cardiovascular system parameters that may vary due to health conditions or age, the pressure estimates are not always reliable. In this paper, we develop a new mathematical model for the OMWE by incorporating an existing model of the cuff-arm-artery system. [ABSTRACT FROM PUBLISHER]