Search

Subnano, nano and sub-micron surface features can selectively activate integrin receptors and induce osteoblast differentiation of bone marrow mesenchymal stem cells. Although it is widely accepted that nanoscale titanium surface roughness may promote differentiation of various osteoblast lineages, there has been no clear report on the threshold dimension of surface features and the optimized dimensions of surface features for triggering integrin activation and stem cell differentiation. This study systematically controlled titanium surface features from the sub-nano to sub-micron scales and investigated the corresponding effects on stem cell responses, such as integrin activation, cyclins, key transcriptional genes of osteoblast differentiation and osteoblastic phenotype genes. Surface features with sub-nano surface dimensions were insufficient to increase integrin activation compared to pure nanoscale titanium surface features. Although both pure nanoscale and nano-submicron hybrid scales of titanium surface features were sufficient for activating integrin-ligand proteins interactions through the α integrin subunits, only nano-submicron hybrid titanium surface features significantly accelerated subsequent osteoblast differentiation of primary mouse bone marrow stromal cells after 2 weeks. In addition, live cell analysis of human bone marrow mesenchymal stem cells on transparent titanium demonstrated rapid cytoskeletal re-organization on the nanoscale surface features, which ultimately induced higher expression of osteoblast phenotype genes after 3 weeks., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Strontium (Sr) has been successfully used for the treatment of osteoporotic bone, increasing new bone formation while reducing bone resorption by stimulating proliferation and differentiation of osteoblastic cells and inhibiting osteoclast function. In this study, Sr-incorporated Ti oxide layer was produced on clinically relevant osteoconductive implant surface, that is, a grit-blasted microrough Ti surface, by a simple hydrothermal treatment with the expectation of utilizing the osteoblast response enhancement effect of Sr for the future applications as a more osteoconductive surface of the permanent load-bearing endosseous implants, without altering the original microrough surface features of grit-blasted Ti at the micron-scale. This surface exhibits a hierarchical structure (i.e., a nanoscale surface architecture of the Sr-incorporated Ti oxide layer (SrTiO(3)) imposed on micron-scale rough Ti structure) and Sr ion release into physiological solution. In vitro experiments using primary mouse bone marrow stromal cells (BMSCs) revealed that the hydrothermally produced SrTiO(3) coating promotes both the early and late cell response of BMSCs grown on a microrough Ti surface, with notably enhanced attachment, spreading, focal adhesion, alkaline phosphatase activity, and expression of critical integrins and osteoblastic phenotype genes. These results indicate that a hydrothermally produced SrTiO(3) coating improves the osteoconductivity of the microrough Ti surface by enhancing both the early and late cell response of BMSCs., (Copyright © 2012 Wiley Periodicals, Inc.)

Objective: Metallic implantation materials having high yield strength, low elastic modulus, and non-cytotoxic alloying elements would be advantageous for the long-term stability of implants. This study assessed the surface and mechanical properties, and also in vitro osteoconductivity of ultrafine-grained (UFG) Ti-13Nb-13Zr alloy produced by dynamic globularization without any severe deformation for future biomedical applications as an endosseous implant material., Material and Methods: The surface characteristics and mechanical properties were investigated by orientation image microscopy, contact angle measurements, optical profilometry, and uniaxial tension tests. Mouse calvaria-derived pre-osteoblastic cell (MC3T3-E1) attachment, spreading, viability, alkaline phosphatase (ALP) activity, and quantitative analysis of osteoblastic gene expression on UFG Ti-13Nb-13Zr alloy were compared with coarse-grained (CG) Ti-13Nb-13Zr and CG Ti-6Al-4V alloys., Results: Dynamic globularized Ti-13Nb-13Zr alloy has an ultrafine grain size (0.3 μm) and an excellent combination of yield strength and elastic modulus compared with CG alloys, which displayed significantly lower water contact angles compared with CG alloys (P<0.05). The UFG and CG Ti-13Nb-13Zr alloys displayed significantly increased cellular attachment compared with CG Ti-6Al-4V alloy (P<0.05). The UFG Ti-13Nb-13Zr supported better cell spreading and more numerous focal adhesions. ALP activity (P<0.05) and mRNA expressions of the osteoblast transcription factor genes (osterix, Runx2) and marker gene for osteoblast differentiation (osteocalcin) were markedly increased in cells grown on the UFG substrate compared with CG substrates at early incubation timepoints., Conclusion: Enhanced pre-osteoblast response to UFG Ti-13Nb-13Zr substrate is attributable to the non-cytotoxic alloying elements and the submicron scale grain size contributes to the superior surface hydrophilicity and abundant grain boundaries favorable for cell behavior. These findings indicate that dynamic globularized UFG Ti-13Nb-13Zr alloy is promising for load-bearing endosseous implant material because of excellent mechanical and biological compatibilites., (© 2010 John Wiley & Sons A/S.)

Objective: This study investigated the surface characteristics and in vitro osteoconductivity of a titanium (Ti) surface incorporated with the magnesium ions (Mg) produced by hydrothermal treatment for future application as an endosseous implant surface., Material and Methods: Mg-incorporated Ti oxide surfaces were produced by hydrothermal treatment using Mg-containing solution on two different microstructured surfaces--abraded minimally rough (Ma) or grit-blasted moderately rough (RBM) samples. The surface characteristics were evaluated using scanning electron microscopy, thin-film X-ray diffractometry, X-ray photoelectron spectroscopy, optical profilometry, and inductively coupled plasma atomic emission spectroscopy (ICP-AES). MC3T3-E1 pre-osteoblast cell attachment, proliferation, alkaline phosphatase (ALP) activity, and quantitative analysis of osteoblastic gene expression on Ma, RBM, Mg-incorporated Ma (Mg), and Mg-incorporated grit-blasted (RBM/Mg) Ti surfaces were evaluated., Results: Hydrothermal treatment produced an Mg-incorporated Ti oxide layer with nanoporous surface structures. Mg-incorporated surfaces showed surface morphologies and surface roughness values almost identical to those of untreated smooth or micro-rough surfaces at the micron scale. ICP-AES analysis showed Mg ions released from treated surfaces into the solution. Mg incorporation significantly increased cellular attachment (P=0 at 0.5 h, P=0.01 at 1 h) on smooth surfaces, but no differences were found on micro-rough surfaces. Mg incorporation further increased ALP activity in cells grown on both smooth and micro-rough surfaces at 7 and 14 days of culture (P=0). Real-time polymerase chain reaction analysis showed higher mRNA expressions of the osteoblast transcription factor gene (Dlx5), various integrins, and the osteoblast phenotype genes (ALP, bone sialoprotein and osteocalcin) in cells grown on micro-rough (RBM) and Mg-incorporated (Mg and RBM/Mg) surfaces than those on Ma surfaces. Mg incorporation further increased the mRNA expressions of key osteoblast genes and integrins (α1, α2, α5, and β1) in cells grown on both the smooth and the micro-rough surfaces., Conclusion: These results indicate that an Mg-incorporated nanoporous Ti oxide surface produced by hydrothermal treatment may improve implant bone healing by enhancing the attachment and differentiation of osteoblastic cells., (© 2010 John Wiley & Sons A/S.)

This study investigated the surface characteristics, in vitro and in vivo biocompatibility of Ti-6Al-4V alloy implants incorporating strontium ions (Sr), produced by hydrothermal treatment using a Sr-containing solution, for future biomedical applications. The surface characteristics were evaluated by scanning electron microscopy, thin-film X-ray diffractometry, X-ray photoelectron spectroscopy, optical profilometry, contact angle and surface energy measurement and inductively coupled plasma-mass spectroscopy (ICP-MS). Human osteoblast-like cell (MG63) attachment, proliferation, alkaline phosphatase (ALP) activity, and quantitative analysis of osteoblastic gene expression on Sr-containing Ti-6Al-4V surfaces were compared with untreated Ti-6Al-4V surfaces. Fifty-six screw implants (28 control and 28 experimental) were placed in the tibiae and femoral condyles of seven New Zealand White rabbits. The osteoconductivity of Sr-containing Ti-6Al-4V implants was evaluated by removal torque testing and histomorphometric analysis after 4weeks implantation. Hydrothermal treatment produced a crystalline SrTiO(3) layer. ICP-MS analysis showed that Sr ions were released from treated surfaces into the solution. Significant increases in ALP activity (P=0.000), mRNA expressions of key osteoblast genes (osterix, bone sialoprotein, and osteocalcin), removal torque values (P<0.05) and bone-implant contact percentages (P<0.05) in both cortical and cancellous bone were observed for Sr-containing Ti-6Al-4V surfaces. The results indicate that the Sr-containing oxide layer produced by hydrothermal treatment may be effective in improving the osseointegration of Ti-6Al-4V alloy implants by enhancing differentiation of osteoblastic cells, removal torque forces and bone apposition in both cortical and cancellous bone., (Copyright 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

This study investigated the surface characteristics and biocompatibility of phosphate ion (P)-incorporated titanium (Ti) surfaces hydrothermally treated with various concentrations of phosphoric acid (H(3)PO(4)). The surface characteristics were evaluated by scanning electron microscopy, thin-film X-ray diffractometry, X-ray photoelectron spectroscopy, optical profilometry, contact angle and surface energy measurement and inductively coupled plasma mass spectroscopy (ICP-MS). MC3T3-E1 cell attachment, spreading, proliferation and osteoblastic gene expression on different surfaces were evaluated. The degree of bony integration was biomechanically evaluated by removal torque testing after 4 weeks of healing in rabbit tibiae. The H(3)PO(4) treatment produced micro-rough Ti surfaces with crystalline P-incorporated Ti oxide layers. High concentration H(3)PO(4) treatment (1% and 2%) produced significantly higher hydrophilic surfaces compared with low H(3)PO(4) treatment (0.5%) and untreated surfaces (P<0.01). ICP-MS analysis showed P ions were released from P-incorporated surfaces. Significant increased cell attachment (P<0.05) and notably higher mRNA expressions of Runx2, alkaline phosphatase, osteopontin and osteocalcin were observed in cells grown on P-incorporated surfaces compared with cells on untreated machined surfaces. P-incorporated surfaces showed significantly higher removal torque forces compared with untreated machined implants (P<0.05). Ti surfaces treated with 2% H(3)PO(4) showed increasing tendencies in osteoblastic gene expression and removal torque forces compared with those treated with lower H(3)PO(4) concentrations or untreated surfaces. These results demonstrate that H(3)PO(4) treatment may improve the biocompatibility of Ti implants by enhancing osteoblast attachment, differentiation and biomechanical anchorage., (Copyright 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Objective: This study investigated the surface characteristics and in vitro biocompatibility of titanium (Ti) surfaces incorporated with strontium ions (Sr) and/or phosphate ions (P) produced by hydrothermal treatment for future applications as endosseous implant surfaces., Material and Methods: Sr and/or P-incorporated Ti oxide surfaces were produced by hydrothermal treatment. The surface characteristics were evaluated by scanning electron microscopy, thin-film X-ray diffractometry, X-ray photoelectron spectroscopy, contact angle and surface energy measurements, inductively coupled plasma atomic emission spectroscopy, and profilometry. MC3T3-E1 pre-osteoblast cell attachment, morphology of spread cells, viability, and quantitative analysis of osteoblastic gene expression on grit-blasted microrough (RBM), P-incorporated (P), and P- and Sr-incorporated (SrP) Ti surfaces were evaluated., Results: Microstructured P and SrP surfaces showed significantly higher wettability and surface energy compared with RBM surfaces (P<0.01). After immersion in Hank's balanced salt solution, considerable apatite deposition was observed on the P and SrP surfaces. Sr incorporation significantly increased cellular attachment and viability compared with other surfaces (P<0.05). Real-time polymerase chain reaction analysis showed markedly higher mRNA expressions of the osteoblast transcription factor gene (Runx2) and the osteoblast phenotype genes (alkaline phosphatase, osteopontin, bone sialoprotein, and osteocalcin) in cells grown on the P and SrP surfaces compared with those on the RBM surface., Conclusions: These results demonstrate that Sr- and P-incorporated Ti oxide surfaces may improve implant bone healing by enhancing attachment, viability, and differentiation of osteoblastic cells.

This study investigated the surface characteristics and in vitro biocompatibility of ultrafine-grain pure titanium substrates produced by equal channel angular pressing (ECAP) using MC3T3-E1 pre-osteoblast cells, compared with those of conventional coarse-grain pure titanium (CP) and Ti-6Al-4V (Ti64) substrates. All Ti surfaces were grit-blasted with hydroxyapatite particles to produce microrough surfaces. The surface characteristics were evaluated by electron back-scattered diffractometry, scanning electron microscopy, contact angle and surface energy measurements, and optical profilometry. The morphology of spread cells, cell attachment, viability, alkaline phosphatase (ALP) activity, quantitative analysis of osteoblastic gene expression and mineralization nodule formation on different surfaces were evaluated. ECAP-processed substrates showed a significantly lower water contact angle and higher surface energy compared with coarse-grain CP and Ti64 substrates (p<0.05). They also showed enhanced cell spreading, attachment, viability and ALP activity compared with the CP and Ti64 surfaces (p<0.05). Real-time polymerase chain reaction analysis showed notably higher ALP, osteopontin and osteocalcin mRNA levels in cells grown on the ECAP surfaces than on the CP and Ti64 surfaces, and the ECAP surfaces showed significantly greater mineralization nodule formation compared with the CP and Ti64 substrates (p<0.05). These results demonstrate the superior osteoblast cell compatibility of microroughened Ti surface made of ECAP-processed ultrafine-grain pure Ti substrates over coarse-grain pure Ti and Ti64 substrates.