Search

In this study, we applied an inductively coupled, radio frequency oxygen plasma to maize seeds and investigated its effects on seedling emergence, plant number at tasseling, and crop yield of maize in realistic field conditions. Maize seeds of seven different hybrids were treated over two harvest years. In addition to plasma-treated seeds, a control sample, fungicide-treated seeds, an eco-layer, and a plasma and eco-layer combination, were planted. Seedling emergence, plant number at tasseling (plants/m 2 ), and yield (kg/ha), were recorded. In the first harvest year, results were negatively affected by the presence of an insect pest. In the second harvest year, plant number and yield results were more uniform. In both years, for two and three hybrids, respectively, the highest yield arose from plants from plasma-treated seeds, but the differences were only partially significant. Considering our results, plasma treatment of maize seeds appears to have a positive effect on the yield of the plant.

Protein adhesion and cell response to plasma-treated polymer surfaces were studied. The polymer polyethylene terephthalate (PET) was treated in either an oxygen plasma to make the surface hydrophilic, or a tetrafluoromethane CF(4) plasma to make the surface hydrophobic. The plasma source was radiofrequency (RF) discharge. The adsorption of albumin and other proteins from a cell-culture medium onto these surfaces was studied using a quartz crystal microbalance (QCM), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The cellular response to plasma-treated surfaces was studied as well using an MTT assay and scanning electron microscopy (SEM). The fastest adsorption rate was found on the hydrophilic oxygen plasma-treated sample, and the lowest was found on the pristine untreated sample. Additionally, the amount of adsorbed proteins was higher for the oxygen-plasma-treated surface, and the adsorbed layer was more viscoelastic. In addition, cell adhesion studies support this finding because the best cell adhesion was observed on oxygen-plasma-treated substrates.

Abstract: The removal rate of carbon from amorphous graphite–tungsten composite during cleaning in oxygen plasma was studied. The composite was prepared by sputter deposition from C and WC-targets in Ar atmosphere. A total thickness of deposited layer was about 1μm. The samples were treated in a weakly ionized highly dissociated oxygen plasma created in a microwave discharge at a power of 1kW. The gas flow was 13slh and the pressure was 200Pa. The temperature of the samples during treatment was about 580°C. After plasma treatment the samples were analyzed by AES (Auger electron spectroscopy) depth profiling, XPS (X-ray photoelectron spectroscopy), SEM (Scanning electron microscopy) and AFM (Atomic force microscopy). It was found that during the plasma treatment selective etching of the composite occurred. Carbon was preferentially removed from the composite. XPS results have shown that during the plasma treatment a layer of WO3 was growing on the surface. After about 15min, carbon was completely removed from the deposited composite layer. [Copyright &y& Elsevier]

The technology of selective plasma etching was applied in order to study particle distribution in powder coatings. Etching was performed in pure oxygen plasma. Plasma parameters were measured with a double Langmuir probe and a catalytic probe. At the neutral gas temperature of approximately 50 °C, the electron temperature was approximately 60 000 °C, the density of positive ions approximately 1×1016 m-3, and the density of neutral oxygen atoms 2×1021 m-3. In order to prevent sample overheating, plasma was applied in time intervals of 20 s. The removal of the polymer matrix was accomplished within 2–4 min. After plasma treatment, the samples were analyzed with a scanning electron microscope. All the pigment and filler particles were left intact thus enabling the determination of the original distribution of the particles in the coating. [Copyright &y& Elsevier]

Low pressure inductively coupled plasma was investigated with a combination of two diagnostic techniques: catalytic probes and optical emission spectroscopy (actinometry). Three working gases were used: oxygen, oxygen–argon mixture and hydrogen. Concentrations of oxygen and hydrogen atoms were determined in a wide range of plasma parameters, with pressure ranging from 10 Pa to 70 Pa, applied power in the range from 50 to 250 W and at many different positions throughout the system (including the coil and afterglow in sample chamber). Concentrations of oxygen atoms were measured to be 1.3 × 10 15 cm −3 in the middle of the coil and 4 × 10 12 cm −3 in the regions of the chamber furthest from the coil. These spatially resolved concentrations are very important in plasma processing of materials, because radical concentrations over the sample determine plasma–material interactions. This work demonstrates that a relatively simple detection system can be practical and sufficiently successful in many plasma applications. [ABSTRACT FROM AUTHOR]

Abstract: Deposit buildup and fuel entrapment due to amorphous carbon are relevant issues in fusion devices with carbon based plasma facing components. Neutral atomic species play a significant role – atomic hydrogen facilitates the formation of amorphous carbon while atomic oxygen could be used to remove carbon deposits. The kinetics of either reaction depends on the density of neutral species, which in turn is influenced by recombination on the vessel walls. In this work, we measured the probability of heterogeneous recombination of atomic hydrogen and oxygen on amorphous carbon deposits. The recombination coefficients were determined by observing density profiles of atomic species in a closed side-arm of a plasma vessel with amorphous carbon deposit-lined walls. Density profiles were measured with fiber optics catalytic probes. The source of atomic species was inductively coupled radiofrequency plasma. The measured recombination coefficient values were of the order of 10−3 for both species. [Copyright &y& Elsevier]

Abstract: We present a study of the interaction of amorphous hydrogenated carbon deposits (a-C:H) with neutral oxygen atoms. Samples of a-C:H were exposed to an atomic oxygen rich atmosphere at surface temperatures from 473 K to 623 K. The source of atomic oxygen was microwave plasma, created in oxygen at pressures between 50 Pa and 200 Pa by means of a surfatron. The density of neutral oxygen atoms reached up to 4 ∙ 1021/m3. The densities of neutral atoms were measured by means of a catalytic probe. The erosion process was monitored by means of an infrared pyrometer. At each sample surface temperature, the erosion rates were found to linearly increase with the atomic oxygen density. This allowed us to calculate the reaction rate coefficient at corresponding surface temperatures. The reaction rate coefficient was found to increase exponentially with the sample surface temperature. [Copyright &y& Elsevier]