Search

Designing efficient and bifunctional electrocatalysts for water splitting conforms to the concept of energy conservation and emission reduction but remains challenging now. Herein, the fabrication of a heterostructure by anchoring cobalt‐polyoxometalates (Co‐POM) on NiFe layered double hydroxide (NiFe‐LDH) nanoplates in situ on nickel foam (NF) is first reported (Co‐POM@LDH/NF). The surface area, electron transfer ability, and stability of the heterostructure are increased due to the synergistic effect between Co‐POM and NiFe‐LDH. Particularly, Co‐POM@LDH/NF can deliver a current density of 100 mA cm−2 with an overpotential of only 220 mV for hydrogen evolution reaction (HER) and 226 mV for oxygen evolution reaction (OER) in 1.0 m KOH electrolytes. Impressively, the outstanding stability of Co‐POMs in heterostructures is verified by the experimental observations after electrolysis, indicating the successful construction of stable POMs‐based heterogeneous electrocatalysts. More attractively, the electrolyzer composed by Co‐POM@LDH/NF as anode and cathode shows a much lower operating voltage of 1.51 V at the current density of 10 mA cm−2 for overall water splitting. This study provides a feasible and extensible idea for the design of the POM‐based heterostructures. [ABSTRACT FROM AUTHOR]

Water electrolysis is currently a major technique to produce clean hydrogen, which is regarded as a promising and sustainable energy carrier. The efficiency of water electrolysis is highly dependent on the oxygen evolution reaction (OER) on the anode. The evaluation of an OER electrocatalyst is frequently carried out on a three-electrode system in a container of electrolyte. Herein, we found that the electrode positions in the electrolyte container could significantly affect the data acquisition of OER performance. After a detailed investigation, we reveal that the difference of the OER activity of an electrocatalyst at a different position is originated from their different iRu drop and the gas diffusion resistance. For the first time, this work evokes concerns on the accurate evaluation of electrocatalysts regarding the electrode position. For fair comparisons and reliable results, it is strongly suggested to keep the electrode position unchanged in the electrochemical measurements. In addition, the establishment of a standard electrolyzer setup for electrocatalysis evaluation in the electrochemical community is also called for. [ABSTRACT FROM AUTHOR]

Currently, the process of an acidic oxygen evolution reaction (OER) necessitates the use of Iridium dioxygen (IrO2), which is both expensive and incredibly scarce on Earth. Ruthenium dioxygen (RuO2) offers high activity for acidic OERs and presents a potential substitution for IrO2. Nevertheless, its practical application is hindered by its relatively poor stability. In this study, we have developed Mn–doped RuO2 (Mn–RuO2) nanoarrays that are anchored on a titanium (Ti) mesh utilizing a two–step methodology involving the preparation of MnO2 nanoarrays followed by a subsequent Ru exchange and annealing process. By precisely optimizing the annealing temperature, we have managed to attain a remarkably low overpotential of 217 mV at 10 mA cm−2 in a 0.5 M H2SO4 solution. The enhanced catalytic activity of our Mn–RuO2 nanoarrays can be attributed to the electronic modification brought about by the high exposure of active sites, Mn dopant, efficient mass transfer, as well as the efficient transfer of electrons between the Ti mesh and the catalyst arrays. Furthermore, these self–supported Mn–RuO2 nanoarrays demonstrated excellent long–term stability throughout a chronoamperometry test lasting for 100 h, with no discernible changes observed in the Ru chemical states. [ABSTRACT FROM AUTHOR]

Water electrolysis is a compelling method for the production of environmentally friendly hydrogen, minimizing carbon emissions. The electrolysis of water heavily relies on an effective and steady oxygen evolution reaction (OER) taking place at the anode. Herein, we introduce a highly promising catalyst for OER called CoSe2@NiFeOOH arrays, which are supported on nickel foam. This catalyst, referred to as CoSe2@NiFeOOH/NF, is fabricated through a two-step process involving the selenidation of a Co-based porous metal organic framework and subsequent electrochemical deposition on nickel foam. The CoSe2@NiFeOOH/NF catalyst demonstrates outstanding activity for the OER in an alkaline electrolyte. It exhibits a low overpotential (η) of 254 mV at 100 mA cm−2, a small Tafel slope of 73 mV dec−1, and excellent high stability. The good performance of CoSe2@NiFeOOH/NF can be attributed to the combination of the high conductivity of the inner layer and the synergistic effect between CoSe2 and NiFeOOH. This study offers an effective method for the fabrication of highly efficient catalysts for an OER. [ABSTRACT FROM AUTHOR]

It is significant to develop highly efficient electrocatalysts for energy conversion systems. Interface engineering is one of the most feasible approaches to effectively enhance the electrocatalytic activity. Herein, the density functional theory (DFT) calculations predict that the potential barriers of Fe sites at the interface of FeP—CoP heterostructures are lower than that of Fe sites in FeP nanoparticles (NPs), Co sites in CoP NPs, or Co sites in heterostructures. Motivated by the DFT calculation results, FeP—CoP heterostructures have been designed and synthesized by a metal—organic frameworks (MOFs) confined-phosphorization method. The FeP—CoP exhibits the lowest overpotential of 230 mV at the current density of 10 mA·cm−2 for oxygen evolution reaction (OER), compared with FeP (470 mV) and CoP (340 mV), which outperforms most of transition metal-based catalysts. The Tafel analysis of FeP—CoP heterostructures shows an improved reaction kinetic pathway with the smallest slope of 90.3 mV·dec−1, as compared to the Tafel slopes of FeP NPs (137 mV·dec−1) and CoP NPs (114 mV·dec−1). And the FeP—CoP shows extraordinary long-term stability over 24 h. The excellent activity and long-term stability of FeP—CoP derive from the synergistic effect between FeP and CoP. [ABSTRACT FROM AUTHOR]

Layered double hydroxides (LDHs) are a family of layer materials that receive heightened attention. Herein a ternary NiFeMn-LDH is investigated with superior oxygen evolution activity, which is attributed to the Mn4+ doping in the intralayer, which modifies the electronic structure and improves the conductivity of the electrocatalyst. [ABSTRACT FROM AUTHOR]