Search

Direct seawater zinc‐air batteries (S‐ZABs), with their inherent properties of high energy density, intrinsic safety, and low cost, present a compelling avenue for the development of energy storage technology. However, the presence of chloride ions in seawater poses challenges to their air electrode, resulting in sluggish reaction kinetics and poor stability for the oxygen reduction reaction (ORR). Herein, Fe atomic clusters (ACs) decorated Fe single‐metal atoms (SAs) catalyst (FeSA‐FeAC/NC) is prepared using a plasma treatment strategy. The aberration‐corrected transmission electron microscope images confirm the successful construction of Fe SAs surrounding Fe ACs, which delivers robust ORR activity with a half‐wave potential of 0.886 V in alkaline seawater electrolyte. When utilized as the cathode catalyst in assembled S‐ZABs, the battery demonstrates excellent discharge performance, achieving a peak power density of 222 mW cm−2, which is 2.3 times higher than Pt/C based S‐ZABs. Moreover, density functional theory calculations unveil that the synergy effect between the Fe ACs and SAs not only reduces the spin‐down d‐band center in the Fe SAs, but also efficiently suppresses Cl−1 adsorption on Fe SAs due to their strong Cl−1 absorption ability of the Fe ACs, thereby enhancing both the activity and stability of the catalyst. [ABSTRACT FROM AUTHOR]

Plasma etching treatment is an effective strategy to improve the electrocatalytic activity, but the improvement mechanism is still unclear. In this work, a nitrogen‐doped carbon nanotube‐encased iron nanoparticles (Fe@NCNT) catalyst is synthesized as the model catalyst, followed by plasma etching treatment with different parameters. The electrocatalytic activity improvement mechanism of the plasma etching treatment is revealed by combining the physicochemical characterizations and electrochemical results. As a result, highly active metal–nitrogen species introduced by nitrogen plasma etching treatment are recognized as the main contribution to the improved electrocatalytic activity, and the defects induced by plasma etching treatment also contribute to the improvement of the electrocatalytic activity. In addition, the prepared catalyst also demonstrates superior ORR activity and stability than the commercial Pt/C catalyst. [ABSTRACT FROM AUTHOR]

Fe−N−C represents the most promising non‐precious metal catalysts (NPMCs) for the oxygen reduction reaction (ORR) in fuel cells, but often suffers from poor stability in acid due to the dissolution of metal sites and the poor oxidation resistance of carbon substrates. In this work, silicon‐doped iron‐nitrogen‐carbon (Si/Fe−N−C) catalysts were developed by in situ silicon doping and metal–polymer coordination. It was found that Si doping could not only promote the density of Fe−Nx/C active sites but also elevated the content of graphitic carbon through catalytic graphitization. The best‐performing Si/Fe−N−C exhibited a half‐wave potential of 0.817 V vs. reversible hydrogen electrode in 0.5 m H2SO4, outperforming that of undoped Fe−N−C and most of the reported Fe−N−C catalysts. It also exhibited significantly enhanced stability at elevated temperature (≥60 °C). This work provides a new way to develop non‐precious metal ORR catalysts with improved activity and stability in acidic media. [ABSTRACT FROM AUTHOR]

This article, titled "Understanding the improvement mechanism of plasma etching treatment on oxygen reduction reaction catalysts," explores the use of plasma etching as a method to synthesize and enhance the performance of electrocatalysts. The study reveals that the introduction of highly active metal-nitrogen species through nitrogen plasma etching treatment is the main factor contributing to the improved electrocatalytic activity. Additionally, the defects induced by plasma etching also play a role in the high performance of the catalysts. The authors of the article are Peng Rao, Yanhui Yu, Shaolei Wang, Yu Zhou, Xiao Wu, Ke Li, Anyuan Qi, Peilin Deng, Yonggang Cheng, Jing Li, Zhengpei Miao, and Xinlong Tian. [Extracted from the article]

[Display omitted] • A general strategy is developed to prepare ternary single-atom catalysts. • The ternary single-atom catalyst shows high bifunctional activity. • Theatrical calculations provide insights into enhanced bifunctional performance. Synergistic effects have been demonstrated for binary single-atom catalysts (SACs), while it is still challenging to investigate the activity and performance of ternary SACs due to the lack of robust method to synthesize these materials. Herein, we provide a general approach for the preparation of ternary SACs, and the features of single atoms highly dispersed on the support have been identified and verified. As an illustration, trace platinum decorated iron-cobalt ternary single atom catalysts (PtFeCo/NC) possess an obviously enhanced bifunctional activity of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), as well as high stability. The density functional theory calculations reveal that the synergistic effects induced by the introduction of Pt enable modulating the adsorption strength of reaction intermediates both on the Fe-N 4 and Co-N 4 sites, thus enhancing the ORR and OER activity, respectively. In addition, the PtFeCo/NC-based Zn-air battery delivers a higher power density than that of commercial Pt/C-RuO 2 , and can be steadily operated over 188 h. [ABSTRACT FROM AUTHOR]