Search

Compression ignition engines are one of the world's largest consumers of fossil oil but have energy extraction efficiency limited to 35%. Addition of hydrogen alongside diesel fuel has been found to improve engine performance and efficiency; however, after a certain limit, hydrogen begins to show adverse effects, mainly because the ratio of oxygen to fuel decreases. This can be overcome by using oxyhydrogen, which is a mixture of hydrogen and oxygen gas. In this study, effects of addition of oxyhydrogen generated by electrolysis, with varying flows at the intake manifold, on a 315 cc compression ignition engine alongside diesel were analyzed. The engine was mounted on a Thepra test bed and torque measurements were taken at predetermined test points for diesel and 6 and 10 standard cubic feet per hour flowrates of oxyhydrogen. H10 showed the maximum improvement in engine performance equating to a 22.4% increase in both torque and power at 3000 r/min, and a 19.4% increase in efficiency at 2600 r/min was recorded. The large increase in engine performance as compared to previous results is because of high oxyhydrogen flowrate to displacement volume ratio. The oxyhydrogen flowrate to displacement ratio is the most important factor as it is directly impacts engine performance. The difference in engine performance because of oxyhydrogen becomes prominent at higher engine speed due to high suction pressure. No experimental flowrates of oxyhydrogen showed any adverse effect on the engine performance. [ABSTRACT FROM AUTHOR]

Biodiesel and oxyhydrogen (HHO) gas have shown promising results in improving engine performance and emissions. In this work, the effects of HHO gas and 5% biodiesel blends (B5) and their combined use in a 315 cc diesel engine have been analyzed. Biodiesel is produced by base catalyzed transesterification and cleaned by emulsification. Its calculated cetane index (CCI) was 61.4. HHO gas is produced from electrolysis of concentrated potassium hydroxide solution. The use of 5% biodiesel blend resulted in a significant rise of 9.4% in the brake thermal efficiency (BTE) and a maximum reduction of 8.19% in the brake specific fuel consumption (BSFC). HHO enrichment of diesel and biodiesel at 2.81 L/min through the intake manifold improved the torque and power by an average of over 3%. HHO addition also improved the BTE of diesel by a maximum of 3.67%. The combination of high CCI biodiesel fuel and HHO creates a mixture that has shortened the ignition delay (ID) to the point that adverse effects were observed due to the premature combustion as shown by the average decrease in the BTE of 2.97% compared to B5. Thus, B5, on its own, is found to be the optimum fuel under these conditions. [Display omitted] • Biodiesel purity improved by electrolytic separation and emulsification. • Oxyhydrogen enriched diesel gives significant increase in torque and power output. • Oxyhydrogen enriched biodiesel show adverse effects on engine efficiency. • BSFC and thermal efficiency improved significantly with B5 Blend. [ABSTRACT FROM AUTHOR]