Search

A low-cost and portable paper-based analytical device has been developed for high throughput and on-site monitoring TC residue in milk through visualized colorimetric reaction. The filtration and concentration effect induced by the porous nature of paper contribute to strengthen the color intensity, leading to quantitative and sensitive detection of tetracycline reaching 1 ppm detection limit, with the linear range of 1-100 ppm both in water and milk samples. The applicability was demonstrated by detection of TC in 18 different types of real milk samples with good recovery ranging from 88% to 113%. Furthermore, the dynamic degradation behavior of tetracycline was monitored through the device. To the best of our knowledge, this is the first report of colorimetric detection of tetracycline in milk using the paper-based device. This simple, fast, cost-effective (~$0.50 per device) and equipment-free paper-based platform provides a promising tool for future application in food and environmental safety., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

In this work, a self-circulation oxygen-hydrogen peroxide-oxygen (O 2 -H 2 O 2 -O 2 ) system with photogenerated electrons as fuel and highly active hemin monomers as operators was engineered for ultrasensitive cathode photoelectrochemical bioassay of microRNA-141 (miRNA-141) using a stacked sealed paper device. During the circulation, the photogenerated electrons from BiVO 4 /Cu 2 O photosensitive structures assembled on a reduced graphene oxide paper electrode first reduced the electron acceptors (dissolved O 2 ) to H 2 O 2 , which was then catalytically decomposed by hemin monomers to generate O 2 again. The regenerated O 2 continued to be reduced, which made O 2 and H 2 O 2 stuck in the infinite loop of O 2 -H 2 O 2 -O 2 accompanied by the fast consumption of photogenerated electrons, generating an amplified photocurrent signal. When a target existed, a duplex-specific nuclease-induced target recycling reaction with dual trigger DNA probes as the output was performed to initiate the assembly of bridge-like DNA nanostructures, which endowed the self-circulation system with dual destruction functions as follows. (i) Reduced fuel supply: the assembled DNA bridges acting as a negatively charged barrier prevented the photogenerated electrons from participating in the O 2 reduction to H 2 O 2 . (ii) Incapacitation of operators: DNA bridging induced the dimerization of hemin monomers linked on the DNA hairpins to catalytically inactive hemin dimers, leading to the abortive regeneration of O 2 . These destruction functions resulted in the circulation interruption and a remarkably decreased photocurrent signal. Thus, the developed cathode photoelectrochemical biosensing platform achieved ultrasensitive miRNA-141 detection with a linear range of 0.25 fM to 1 nM and a detection limit of 83 aM, and it also exhibited high accuracy, selectivity, and practicability.

Paper based assays are paving the way to automated, simplified, robust and cost-effective point of care testing (POCT). We propose a method for fabricating three dimensional (3D) microfluidic paper based analytical devices (μPADs) via combining thin adhesive films and paper folding, which avoids the use of cellulose powders and the complex folding sequence and simultaneously permits assays in several layers. To demonstrate the effectiveness of this approach, a 3DμPADs was designed to conduct more assays on a small footprint, allowing dual colorimetric and electrochemical detections. More importantly, we further developed a 3D platform for implementing automated and multiplexed ELISA in parallel, since ELISA, a routine and standard laboratory method, has rarely been used in practical analyses outside of the laboratory. In this configuration, complex and multistep diagnostic assays can be carried out with the addition of the sample and buffer in a simple fashion. Using Troponin I as model, the device showed a broad dynamic range of detection with a detection limit of 0.35 ng/mL. Thus, the developed platforms allow for various assays to be cost-effectively carried out on a single 3D device, showing great potential in an academic setting and point of care testing under resource-poor conditions., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Paper based biosensor devices have the benefit of easy-use, low-cost and environmental friendly for point-of-care diagnostic application. In this research, we report a novel form of paper based biosensor with hierarchical assembled nanomaterials and MOF enhanced bio-probes for the simultaneous detection of microRNA-141 (miR-141) and microRNA-21 (miR-21) which have the potential for early cancer detection. The combination of multi-dimensional nanomaterial allows low impedance and high sensing area on typical poorly defined paper substrate. MOF conjugated bio-probe, methylene blue (MB) and ferrocene (Fc) with distinguishable electrochemical signal, further contributed to the high selectivity and sensitivity. Simultaneously detection of miR-141 and miR-21 with a detection limit of 0.1 fM was demonstrated under optimal conditions. All these features enable accurately target detection in serum samples. Therefore, this strategy is of promising as an inexpensive, easy access diagnosis platform for cancers by means of simultaneously detection of a variety of miRNA biomarkers., (Copyright © 2019 Elsevier B.V. All rights reserved.)

This paper presents a whole-cell biosensor that operates in conjunction with a smartphone-based fluorescence diagnostic system on a paper device to monitor the concentration of gold ions in human urine. The heavy metal-tolerant bacteria Cupriavidus metallidurans was genetically engineered for use as a chassis in a red fluorescent protein (RFP)-based microbial sensor. The biosensor is highly sensitive to gold ions, with a detection limit of 110 nM. The proposed smartphone-based analysis system provides a user-friendly approach to design tools of personal health monitoring for reporting the presence of gold ions in human urine.

Telomerase is extensively expressed in various cancer cells and recognized as a target for cancer drug discovery. In the present study, a simple and amplification-free fluorescence assay based on polyamidoamine starburst dendrimer (PAMAM dendrimer)-activated paper device is proposed for sensitive detection of telomerase activity through hybridization of Cy5 modified single strand DNA probes with telomerase extension products. The paper substrate is fabricated by hand drawing according to a template, which is low cost, instrument free and easy operation. PAMAM is rich in amino groups on its surface and employed to immobilize the telomerase substrate (TS) primer. Highly sensitive detection of telomerase activity in HeLa cell lysate of 10 cells is achieved since the PAMAM dendrimer-activated paper surface can provide high density of binding sites for immobilization of TS primer. The experimental results also demonstrate that the assay can be employed to evaluate telomerase activity levels of various cell lines and screen telomerase inhibitors., (Copyright © 2017 Elsevier B.V. All rights reserved.)

In the present study, we aimed to determine the applicability of a paper container for the vitrification of in vitro matured (IVM) bovine oocytes. In experiment 1, IVM oocytes were exposed to vitrification solution (20% dimethylsulfoxide (DMSO), 20% ethylene glycol (EG), and 5 mol/L sucrose), using a two-step method, for 30 s; loaded onto either a paper container or Cryotop; and stored in liquid nitrogen. No significant difference (P < 0.05) in the survival and blastocyst formation rates after in vitro vitrification was observed between the paper container and Cryotop. In experiment 2, IVM oocytes were exposed to either a two- or three-step vitrification solution. The three-step vitrification solution was not significantly different from the two-step solution in terms of oocyte survival, cleavage and blastocyst rates. In experiment 3, in vitro produced blastocysts were graded according to the manual of the International Embryo Transfer Society (grades 1 and 2) and vitrified using the two- and three-step methods. For grade 2 blastocysts, the three-step method showed significantly higher (P < 0.05) survival and hatched blastocyst rates than the two-step method, whereas for grade 1 blastocysts, no significant difference was observed. In conclusion, the paper device and three-step technique are suitable for oocytes and embryo vitrification., (© 2017 Japanese Society of Animal Science.)