Search

Abstract Bioaccessibility of particle-bound hydrophobic organic contaminants and related particle size effects are significant for assessing the potential human health risk via inhalation exposure, but have not been clearly evaluated. To fill this knowledge gap, the present study developed an in vitro method to estimate the inhalation bioaccessibility of particulate polycyclic aromatic hydrocarbons (PAHs) using simulated human lung fluids, i.e. , a modified Gamble's solution (MGS) and artificial lysosomal fluid (ALF) with Tenax as the absorption media. Assay parameters, namely incubation time (10 d) and influence of filter use, were optimized for establishing the in vitro method. The results showed that the bioaccessibility of PAHs increased with increasing particle size, but other factors, such as total organic carbon and chemical hydrophobicity, also played a large role in the fate of these compounds. The results from this portion of the present study were then used to evaluate human health risk, which showed that the risk of these particle-bound PAHs by incorporating size-dependent PAHs bioaccessibility and deposition efficiency in the human respiratory tract into inhalation exposure risk calculations was reduced by >90% when compared to using total concentration. This suggested that the inhalation bioaccessibility and deposition efficiency of hydrophobic organic chemicals should be included in human health risk assessment. Graphical abstract Unlabelled Image Highlights • An in vitro method was developed for evaluating the IBAF of particle-bound HOCs. • The inhalation bioaccessibility of PAHs decreased with increasing hydrophobicity. • The IBAF of particle-bound HOCs is significant to human health risk assessment. [ABSTRACT FROM AUTHOR]

Barbecue (BBQ) is one of the most popular cooking activities with charcoal worldwide and produces abundant polycyclic aromatic hydrocarbons (PAHs) and particulate matter. Size distribution and clothing-air partitioning of particle-bound PAHs are significant for assessing potential health hazards to humans due to exposure to BBQ fumes, but have not been examined adequately. To address this issue, particle and gaseous samples were collected at 2-m and 10-m distances from a cluster of four BBQ stoves. Personal samplers and cotton clothes were carried by volunteers sitting near the BBQ stoves. Particle-bound PAHs (especially 4–6 rings) derived from BBQ fumes were mostly affiliated with fine particles in the size range of 0.18–1.8 μm. High molecular-weight PAHs were mostly unimodal peaking in fine particles and consequently had small geometric mean diameters and standard deviations. Source diagnostics indicated that particle-bound PAHs in BBQ fumes were generated primarily by combustion of charcoal, fat content in food, and oil. The influences of BBQ fumes on the occurrence of particle-bound PAHs decreased with increasing distance from BBQ stoves, due to increased impacts of ambient sources, especially by petrogenic sources and to a lesser extent by wind speed and direction. Octanol-air and clothing-air partition coefficients of PAHs obtained from personal air samples were significantly correlated to each other. High molecular-weight PAHs had higher area-normalized clothing-air partition coefficients in cotton clothes, i.e., cotton fabrics may be a significant reservoir of higher molecular-weight PAHs. Capsule Particle-bound PAHs from barbecue fumes are generated largely from charcoal combustion and food-charred emissions and mainly affiliated with fine particles. [ABSTRACT FROM AUTHOR]

[Display omitted] • Atmospheric release of PFAS intermediates was evidenced during waste treatment. • Landfills could be a point source of airborne PFAS into the atmosphere. • PFOS exhibited a consistent and distinct peak in the coarse particulate fraction. • Deposition of particulate PFAS in human lung was predicted to be size-dependent. Per- and polyfluoroalkyl substances (PFAS) have been applied in numerous industrial and consumer products, the majority of which flow into waste management infrastructures (WMIs) at the end of their life cycles, but little is known about atmospheric releases of PFAS from these facilities. In this study, we addressed this key issue by investigating 49 PFAS, including 23 ionic and 26 neutral and precursor PFAS, in the potential sources (n = 4; within or adjacent to WMIs) and reference sites (n = 2; coastal and natural reserve sites) in urban and rural areas of Hong Kong, China. Duplicate samples of air and size-segregated particulate matter were collected for 48 h continuously using a 11-stage Micro-Orifice Uniform Deposit Impactor (MOUDI). In general, fluorotelomer alcohols (FTOHs) and perfluoroalkane sulfonamides were the predominant PFAS classes found across sampling sites. We also demonstrated the release of several less frequently observed semivolatile intermediate products (e.g., secondary FTOHs) during waste treatment. Except for perfluorooctane sulfonate, the size-segregated distributions of particulate PFAS exhibited heterogeneity across sampling sites, particularly in the WMIs, implying combined effects of sorption affinity and emission sources. A preliminary daily air emission estimation revealed that landfill was a relatively important source of PFAS relative to the wastewater treatment plant. A simplified International Commission on Radiological Protection model was used to estimate lung depositional fluxes, and the results showed that inhaled particulate PFAS were mainly deposited in the head airway while fine and ultrafine particles carried PFAS deeper into the lung alveoli. The cumulative daily inhalation dose of gaseous and particulate PFAS ranged from 81.9 to 265 pg/kg/d. In-depth research is required to understand the health effect of airborne PFAS on workers at WMIs. [ABSTRACT FROM AUTHOR]