Search

Exhaust gases from ships and automobiles have a significant impact on people and the environment. As a result, diesel engines used in land and marine vehicles are gradually being restricted, and low-carbon engines are under development. This study considers marine diesel oil (MDO) that is used in ships to meet the emission regulations required by the International Maritime Organization. This investigation explores the method and application technology for the reduction of nitrogen oxides (NOx) and particulate matter using emulsified fuel and mass-produced dimethyl ether (DME) fuel, which are analyzed. When comparing emulsified fuel and DME fuel to MDO, which is a ship oil, NOx are reduced by 20–45% and the particulate matter is reduced by 60–97%. When emulsified fuel containing moisture is used, the combustion chamber temperature is lowered due to the optimal expansion by moisture contained in the fuel. The particulate matter is also reduced. When DME fuel is used, it reduces the particulate matter by more than 97% in comparison with the existing MDO fuel and the emulsified fuel. The conditions are believed to be suitable for combustion and they can be satisfied by supplying oxygen during post-combustion. [ABSTRACT FROM AUTHOR]

As concerns regarding environmental pollution, energy security and future oil supply continue to grow, communities around the world are looking for non-petroleum-based alternative fuels along with advanced energy technologies (e.g., fuel cells) to increase energy use efficiency. Compared with the main alternative fuel candidates (e.g., methane, methanol, ethanol and Fischer–Tropsch fuels), dimethyl ether (DME) seems to have a significant potential to solve the aforementioned problems and can be used as a clean, high-efficiency compressed ignition fuel with reduced nitrogen oxide, sulphur oxide and particulate matter (PM) emissions. In this study, the results of experiments using a ship engine and numerical analysis were verified using AVL BOOST software. Based on these verifications, nitrogen oxide and PM reduction characteristics were numerically analysed by controlling the diameter and spraying time of the fuel nozzle, which is the fuel injection system of a marine engine. When DME fuel was used, nitrogen oxide and PM emissions were reduced by 40% and 90%, respectively, compared with marine diesel oil fuel. To prove the viability of DME as an alternative fuel, combustion and exhaust characteristics were analysed in accordance with injection timing and the variation of nozzle hole. [ABSTRACT FROM AUTHOR]

In this study, the exhaust gas characteristics of marine diesel oil (MDO) and emulsion fuels, which are currently used to reduce nitrogen oxides and particulate matters emitted from ship engines, were investigated through experimental and numerical analyses. The moisture included in the emulsion fuel primarily promotes the atomization of fuel due to microexplosion, and lowers the combustion temperature due to the latent heat of evaporation from the evaporation of moisture, thus reducing nitrogen oxides and particulate matter. In the case of emulsion fuel containing a water content of 16%, the combustion temperature was lowered, and the reduction rate of nitrogen oxide and black carbon was about 60% and 15%, respectively. The proposed method is a combustion control technology that can reduce particulate matter as well as nitrogen oxides by using emulsion fuel. [ABSTRACT FROM AUTHOR]