Search

Direct model predictive control (DMPC) of permanent magnet synchronous generators with full-scale back-to-back (BTB) converters plays an important role in improving the power quality injected to the grid and to comply with grid codes. However, DMPC suffers from the excessive computational burden since all the feasible voltage vectors (VVs) of the BTB converter are used for the prediction and evaluation. Moreover, the weighting factor in the cost function may affect the control performance and tuning it is a complex process. Accordingly, benefiting from the simplicity of the direct control techniques, new direct model predictive flux and power control are proposed in this article, in combination with the direct torque and power control (DTC and DPC), respectively. By defining new DTC and DPC switching tables, only three out of the eight predictions are required to select the best VV for each converter of the BTB topology, which significantly reduces the algorithm computations. To avoid the weighting factor, the electromagnetic torque is simply converted into an equivalent stator flux and only the latter one is considered in the cost function. Experimental results prove that the execution time can be reduced by 26.9%, while the best control performance can be achieved. [ABSTRACT FROM AUTHOR]

Model predictive fault‐tolerant current control (MPFTCC) of permanent magnet synchronous generator (PMSG) drives can make a valuable contribution to improving the reliability and availability levels of wind turbines, because back‐to‐back (BTB) converters are prone to failure. However, MPFTCC suffers from excessive computational burden, because the BTB converter is treated as one system where all feasible voltage vectors (VVs) are used for prediction and evaluation. Accordingly, a computationally efficient MPFTCC algorithm for a PMSG drive is developed and proposed with the ability to handle insulated‐gate bipolar transistor open‐circuit faults. The candidate VVs of both machine‐ and grid‐side converters are separately predicted and evaluated, which significantly reduces calculation effort. The proposed reconfigurable converter is a five‐leg power converter with a common leg that connects the generator first phase to the grid three‐phase, ensuring proper postfault reconfiguration of the grid‐side inverter. Moreover, a three‐switch rectifier is adopted to achieve fault tolerance of the PMSG‐side rectifier. Performance of the considered MPFTCC strategies is evaluated by experimental means. [ABSTRACT FROM AUTHOR]

Fault tolerance in wind turbines is considered crucial to increase their reliability and availability levels. This paper presents a fault-tolerant direct-drive permanent magnet synchronous generator (PMSG) using new direct control techniques, with the ability to handle power semiconductor open-circuit faults in the full-scale back-to-back converter. The fault-tolerant topology consists of a five-leg converter, with a shared leg connected to a generator phase and to its corresponding grid phase, through a triode for alternating current (TRIAC). The main contribution of this paper consists of the development of an alternative direct torque control and direct power control schemes for both machine-side converter and grid-side converter, respectively. Moreover, a reliable fault diagnostics algorithm without requiring additional sensors is also integrated, providing the information required to instantaneously trigger fault-tolerant remedial strategies. Simulation and experimental results are presented to validate the effectiveness of the proposed fault-tolerant PMSG drive. [ABSTRACT FROM AUTHOR]

In order to increase the reliability and availability of wind turbines, condition monitoring and fault diagnosis are considered crucial means to achieve these goals. In this context, direct drives wind turbines based on permanent-magnet synchronous generators (PMSGs) with full-scale power converters are an emerging and promising technology. However, several statistical studies point out that power converters are a significant contributor to the overall failure rate of modern wind turbines. Accordingly, this paper presents a new algorithm for multiple open-circuit faults diagnosis in full-scale back-to-back converters, applied in PMSG drives used for wind turbine systems. The proposed method is based on a Luenberger observer and on an adaptive threshold, which can guarantee a reliable diagnosis independently of the drive operating conditions. Several simulation and experimental results using a PMSG drive with a full-scale converter are presented, showing the diagnostic algorithm effectiveness and robustness against false alarms for both generator- and grid-side converters. [ABSTRACT FROM AUTHOR]