Search

Flux-switching permanent magnet (FSPM) machines have attracted wide attention in many rotating applications that require high-power density. In this research, we propose for the first time a novel six-phase FSPM generator with a stator featuring a V-shaped flux-focusing magnet arrangement. The design is targeted for low-speed wind power generation. To achieve the design objectives as a wind generator, the highly comprehensive structural parameters, including the number of rotor poles, split ratio, and rotor pole width, are designed and optimized using 2D finite-element analysis. From findings, the optimal stator/rotor pole combination is discovered to be 12/19 for the considered power and speed requirements. When compared to the initial structure, the optimized structure of the V-shaped FSPM generator is found to produce a significant improvement in EMF, cogging torque, electromagnetic torque, power, and efficiency. The power-generating performance of the proposed FSPM generator is found to be outstanding when compared to the radial-flux PM generators described in the literature. Therefore, the proposed V-shaped FSPM generator is capable of being used for low-speed wind power generation. The machine configuration adjustment approach presented in this work can also be utilized for the design of permanent magnet wind generators. [ABSTRACT FROM AUTHOR]

Partitioned stator doubly salient permanent magnet generators (PS-DSPGs) have been extensively used for electrical generation mainly due to their high reliability, high electromotive force (EMF), and high-power output. Therefore, we aim to improve the output power of a PS-DSPG by designing the optimal configuration of generator pole structure. Electrical characteristics including the magnetic flux linkage distribution, phase EMF, cogging torque, voltage regulation, and power output profile were characterized by using the finite element method. After optimizing the generator pole structure including the angle of air gap arc width, it was found that the proposed PS-DSPG with 18/15 (stator/rotor) pole structure with optimized air gap arc width could produce higher EMF of about 23.24% than a conventional structure because this structure has the suitable number of pole structures. Also, an analysis of voltage regulation and power output profiles under the loaded condition were carried out, and it was indicated that the PS-DSPG based on the suitable 18/15-pole structure could provide the best machine performance where the output power is 11.63% higher than the conventional structure. Hence, the proposed PS-DSPG with 18/15-pole structure can appropriately be utilized for electrical generation, especially in low-speed operated generator applications. [ABSTRACT FROM AUTHOR]

The doubly salient permanent magnet (DSPM) machines are very attractive for low-speed power generation. In this work, we propose a design technique to improve the output power of the DSPM generator by an adjustment of pole configuration. The number of stator and rotor poles, split ratio, as well as the stator pole arc of the generator, were proposedly adjusted and optimized. The output characteristics of the generator including the magnetic flux linkage, electromotive force, harmonic, cogging torque, electromagnetic torque, output voltage and output power were analyzed through finite element analysis. The symmetrical magnetic field distribution of all generators was firstly verified. Then, the results indicated that this particular generator was optimized at 18 stator poles and 12 rotor poles, while the split ratio and the stator pole arc should be set as 0.78 and 6.15 degrees, respectively. The proposed optimal generator could provide a significant improvement in the output voltage and the output power compared to the conventional structure. The output power of 1.28 kW can be reached by the optimal structure, which was two times higher than that of the conventional structure. The physical explanation regarding to the structural modification was also given. The proposed design technique can be applied for improving the output power of the DSPM machines. [ABSTRACT FROM AUTHOR]

An optimal stator design technique of a three-phase doubly salient permanent magnet generator (DSPMG) for improving the soutput power is proposed. The stator configuration was optimally designed by adjusting the stator pole depth and stator pole arc. The trapezoid outer stator tip was also designed. Then, the output characteristics of the designed DSPMG including the flux linkage, electromotive force (EMF), harmonic, cogging torque, efficiency, magnetic flux distribution and voltage regulation were characterized by using the finite element method. Results were compared to the original structure in the literature. It was found that the flux linkage, EMF, cogging torque, and efficiency of the proposed DSPMG were significantly improved after the stator pole depth and stator pole arc were suitably modified. Further details of optimal stator pole depth and stator pole arc are presented. The EMF produced by the optimal proposed structure was 47% higher than that of the conventional structure, while 56% cogging torque improvement and 20% increased efficiency were achieved. The EMF generated by the proposed structure was classified in the high-range scale compared to the other existing models. The symmetrical magnetic flux distribution of all structures was indicated. The voltage regulation of the modified structure was also significantly improved from the conventional model. The proposed design technique can be utilized to maximize the electromagnetic performance of this particular generator type. [ABSTRACT FROM AUTHOR]