Search

In steady-state operation of Hall thrusters excited by permanent magnets, the existence of temperature difference between the inner and outer permanent magnets will cause the deviation of the magnetic field configuration from the design value, thus affecting the discharge process. The simulation results show that the ion power loss on the inner wall increases by over 7.5% when the temperature difference between the inner and outer permanent magnets reaches to 140 ℃. The main reason is that the coercivity of the inner permanent magnet decreases more at higher temperature, and the magnetic field lines will incline toward the inner wall, resulting in the increment of the radial component of the electric field pointing to the inner wall. An optimized magnetic field, obtained by moving the inner permanent magnet outward in an appropriate manner, is proposed to alleviate the inner wall erosion. The optimized magnetic field has a near-symmetrical configuration, especially the nearly equal length of intersection lines of the magnetic field lines with the inner and outer walls, which is contributed to reduce the radial component of the electric field and preventing the inclination of the main ionization zone toward the inner wall, so that the peak value of ion power deposition on inner wall can be reduced by more than 50%. Based on the illustrated features and mechanism of wall erosion, an effective and easy-to-implement optimization scheme was proposed in this work to provide a useful reference for the design of long-life Hall thrusters with large height-radius ratio. [ABSTRACT FROM AUTHOR]

Using a permanent magnet to realize a design with a large height-radius ratio can effectively reduce the radial size of the thruster. The experimental results show that a Hall thruster with a large height-radius ratio also has significant advantages in its discharge performance. Taking the 1.35 kW Hall thruster HEP-1350PM, which has a large height-radius ratio, as an example, the thrust, specific impulse, and efficiency of HEP-1350PM are increased by up to 4.3%, 10.4%, and 7%, respectively, as compared to SPT-100, while its weight is only 56% of that of SPT-100. Numerical simulations were performed to understand the discharge characteristics of a Hall thruster with a large height-radius ratio and the internal mechanism of its performance improvement. The results show that the small middle diameter and wide channel structure concentrate the distribution of the neutral gas in the channel, accelerate the decrease of the propellant density along the axial direction, and move the main ionization zone closer to the channel upstream. These factors increase the ionization concentration, ionization rate peak, working medium utilization rate, and voltage utilization rate. They also reduce the ion loss on the wall surface and plume divergence, thereby improving the comprehensive discharge performance. This study verifies the feasibility of a large height-radius ratio in the design of a Hall thruster, and demonstrates that the design would not only be valuable for reducing the volume and weight of the thruster, but also has the advantages of enhancing its discharge performance and prolonging its working life. • Large height-radius ratio design can reduce the volume and weight of the thruster. • A large height-radius ratio can improve the discharge performance of the thruster. • Hall thruster with a large height-radius ratio has a higher acceleration efficiency. [ABSTRACT FROM AUTHOR]