Search

Despite continuous effort to minimize torque ripple, the reduction of vibration has not been yet achieved due to the lack of link between these two performances. The difficulty of investigating the relationship stems from the fact that torque is solely influenced by tangential force whereas vibration is directly tied to radial force. In this paper, the correlation between torque ripple and vibration in an IPMSM (Interior Permanent Magnet Synchronous Motor) is established by examining the air-gap flux density in both radial and tangential directions. Its temporal and spatial harmonics are analyzed. A six-pole nine-slot IPMSM is used as a base configuration, and the air-gap flux density is varied by changing the height of a stator tooth tip. In the previous study, the same approach has been done to observe how to reduce torque ripple effectively. In this study, however, it is found that the trend of torque ripple is not the same as that of vibration with respect to the height of a pole tip, and the relation between the two is thoroughly observed and explained. [ABSTRACT FROM AUTHOR]

Interior permanent magnet synchronous motors (IPMSMs) are widely utilized due to their high power density. However, noise and vibration issues are often encountered in these motors. While researchers have extensively investigated individual aspects such as noise, vibration, and heat generation in PMSMs, there has been a lack of comprehensive studies examining the interrelationships among these factors. In this paper, a novel approach is proposed for predicting vibration by considering the radial force in the air gap as the exciting force, while also accounting for the changes in the permanent magnet (PM) characteristics caused by heat generation during motor operation. The method involves decomposing and identifying vibration components associated with each vibration mode and predicting noise based on the sound radiation efficiency of each mode. By constructing a vibration map based on current and temperature at a specific frequency, the components most affected by current variations and PM characteristics can be identified. This allows for the proposal of design improvements aimed at reducing vibration. Furthermore, by comparing the vibration map with the noise map, it is confirmed that vibration serves as a source of noise and influences its generation. However, it is found that vibration and noise are not strictly proportional. Overall, a comprehensive analysis of the correlations between vibration, noise, and other factors in IPMSMs is presented in this study. The proposed method and findings contribute to the understanding of the complex dynamics involved and provide valuable insights for the design of quieter and more efficient motor systems. [ABSTRACT FROM AUTHOR]

This paper introduces a novel dual-air-gap surface permanent magnet synchronous motor (DAG-SPMSM) and investigates its electromagnetic characteristics. The motor comprises two stators (inner and outer) and a single rotor with permanent magnets on both sides (inner and outer). The magnets are arranged in a zig-zag configuration to isolate the inner and outer stator and rotor magnets. Additionally, a magnetic shield is incorporated into the rotor to further isolate the rotor magnetic flux, which results in a localized short flux path that can reduce core loss. The insertion of the magnetic shield also affects the flux path, reducing torque ripple. The electromagnetic characteristics, such as flux path, flux density, and torque, are analyzed using finite element analysis. The effectiveness of using a magnetic screen is also evaluated, and simple experiments are conducted to validate the observed characteristics of the proposed motor. [ABSTRACT FROM AUTHOR]

Permanent magnet Vernier machine (PMVM) is a strong candidate for direct-drive applications in low-speed region because its power characteristic is higher than conventional permanent magnet machine (PMM). In this paper, the design of a dual-stator PMVM (DSPMVM) with spoke-type rotor is introduced. As a radial motor with dual-stator configuration, one on the outer and inner side, the rotor is equipped with support bars for practical and simple manufacturing, which is the aim of this study. The characteristics and performance of the proposed machine with and without the support bar are examined with finite element analysis (FEA). The DSPMVM and the support were manufactured and tested through experiments to verify proposed structure. Both simulation and experiment results show that there is little to no difference in performance when the support bar is equipped. Furthermore, the average deviation between simulation and experiment results is approximately 7% which is within the acceptable range. [ABSTRACT FROM AUTHOR]