Search

Electric machines are widely employed in a variety of sectors, including automotive and aerospace industry. With the rising trend towards electrification in aviation, electric machines with increased power density and efficiency are becoming key enabling technologies, requiring the development of innovative design procedures. In this study, a preliminary design procedure for Surface Mounted Permanent Magnet Synchronous Machines (SPMSMs) intensively cooled by means of oil channels placed in the stator slots is proposed. The analytical derivation of SPMSM sizing equations, including the sub‐domain model and optimisation algorithm will be reported in detail. Indeed, both the electromagnetic and thermal equations of the machine are considered for the derivation of the sizing tool. As a result, the latter allows to capture variation of the machine design not only in terms of mechanical demands, such as power and speed, but also in terms of coolant characteristics, and can be effectively employed to perform trade‐off studies at a preliminary design stage. The proposed design tool will be used for a specific case study: The design of a high‐speed machine for an aerospace hydraulic actuator. The accuracy of the proposed design tool is validated for different parameters by comparing the results to experimental measurements performed on an existing 8‐pole 9‐slot prototype SPMSM. [ABSTRACT FROM AUTHOR]

In the last decade, the trend toward higher efficiency and higher torque density electrical machines (EMs) without permanent magnets (PMs) for the industrial sector has rapidly increased. This work discusses the latest research and industrial advancements in synchronous reluctance machines (SynRMs), being the emergent motor topology gaining wide acceptance by many industries. This article presents an extensive literature review covering the background and evolvement of SynRM, including the most recent developments. Nowadays, SynRM has found its niche in the EM market, and the reasons for that are highlighted in this work together with its advantages and disadvantages. The key journal publications in SynRM topics are discussed presenting the biggest challenges and the latest advancements with particular regards to the design methodology. This article aims to provide a thorough overview to the research community and industry about SynRM. There is a clear potential for SynRM to take over a significant portion of the EM market in the near future to meet efficiency standards in industrial applications without the use of rare-Earth PM technology. [ABSTRACT FROM AUTHOR]

This paper is focused on the design, optimisation and control of a permanent magnet assisted synchronous reluctance machine (PMaSynRel) for low cost high efficiency household appliances, in particular a motor for washing machine. The design and optimisation of the motor aims at maximising the torque produced and power factor, while minimise torque oscillations and the losses, thus improving the efficiency. A campaign of tests has been carried out on the prototype of the optimised machine, comparing finite element results and experimental measurements as a validation of the proposed design. In addition, torque ripple measurements are confirming that the solution proposed is meeting the optimisation design targets. The outcomes of this project are demonstrating that PMaSynRel drives are a suitable candidate for white goods sector, and that the proposed design is able to boost the performance and efficiency class with respect to the state-of-the-art solutions. [ABSTRACT FROM AUTHOR]

This paper presents a novel design concept for Synchronous Reluctance (SynRel) machines aimed at reducing the torque ripple. Two general sizing approaches based on the homothetic scaling principle are defined and compared. An in depth analysis on the torque ripple, for a wide range of scaled geometries, evaluated by finite element, has been carried out at different operating conditions. A further analysis is performed on 4 scaled geometries that have been optimized starting from 4 random rotor geometries. It is shown that the main rotor geometrical variables converge to similar values for all scaled machines. The accuracy of the proposed model is then validated by comparing the FE simulated torque ripple waveforms with the experimental data carried out, for a range of operating conditions, on a machine prototype. The outcome of this work is a fast and accurate scaling technique for the preliminary design of SynRel machines with reduced torque ripple. [ABSTRACT FROM AUTHOR]