Search

Comprehensively considering the migration law of air and foam in porous media, various physical and chemical phenomena, and the change of gas phase mobility are researched, then mathematical models of air-foam flooding are established. Based on air-foam flooding experiments, the relevant parameters of empirical model for numerical simulation of air-foam flooding were obtained. Matching of parallel core displacement experiment and air foam test flooding in Wuliwan Oilfield is completed with total fitting degree of more than 90%, and the reliability of empirical model of numerical simulation for air-foam flooding is verified. [ABSTRACT FROM AUTHOR]

Aiming to reduce the negative effect of steam channeling in the late stage of steam flooding applied in heavy oil reservoirs, experimental studies were carried out on selective plugging of solid particles, added to single-medium- and multimedia-assisted steam flooding. This work also explored the mechanisms of enhancing heavy oil recovery by applying plugging agent- and multimedia-assisted steam flooding and its optimized injection parameters. Through solid particle plugging experiments, this study clarifies the high-efficiency solid particle plugging mechanism, with an optimized slug size of 0.40 PV and plugging ratio of over 98%. Through single-medium- and multimedia-assisted steam flooding experiments, this study confirms that gas-assisted steam flooding has an effect of synergistic oil displacement and that a CO2 with urea solution-assisted steam flooding method achieves the best production performance. Its oil recovery factor is 10.7% higher than that of the steam flooding process. Parallel sand pack models with a permeability difference of more than 10 times were used to mimic a heavy oil reservoir with high-permeability channels, and the selective plugging of solid particles was carried out. The plugging ratio of high-permeability formation reached 91.20%, playing an effective plugging role. Solid particle plugging is less effective to the low-permeability formation, with the plugging ratio at only 32.39%. Based on the selective plugging of solid particles, a plugging agent- and multimedia-assisted steam flooding experiment was conducted, the high-permeability formation was effectively plugged, and the swept volume of the low-permeability formation increased significantly. The final recovery factor of the high-permeability formation was enhanced by 11%, and the recovery factor of the low-permeability formation increased by 3 times, reaching 36.38%. Therefore, solid particle plugging effectively alleviates the impact of high-permeability formation caused by permeability difference during steam flooding. [ABSTRACT FROM AUTHOR]