Search

The poor film stability of Sn-Pb mixed perovskite film and the mismatched interface energy levels pose significant challenges in enhancing the efficiency of tin–lead (Sn-Pb) mixed perovskite solar cells. In this study, polyvinylpyrrolidone (PVP) is introduced into the PVK perovskite precursor solution, effectively enhancing the overall stability of the film. This improvement is achieved through the formation of robust coordination bonds between the carbonyl (C=O) in the pyrrole ring and the undercoordinated SnII and PbII, thereby facilitating the passivation of defects. Furthermore, the introduction of PVP inhibits the oxidation of tin (Sn), thereby enhancing the n-type characteristics of the perovskite film. This adjustment in the energy level of the PVK perovskite film proves instrumental in reducing interface energy loss, subsequently improving interface charge transfer and mitigating device recombination. Consequently, perovskite solar cells incorporating PVP achieve an outstanding champion power conversion efficiency (PCE) of 21.31%. [ABSTRACT FROM AUTHOR]

The all-inorganic CsPbI3 perovskite presents promising prospects due to its suitable band gap and nonvolatile nature, while serious nonradiative recombination and unmatched energy level alignment hinder its further developments. Here, a facile and effective surface treatment strategy is proposed to modify the CsPbI3 surface with ethanolamine, leading to significantly reduced defects, and ameliorated band alignment and morphology. Consequently, a champion power conversion efficiency of 18.41% with improved stability is achieved for the inverted CsPbI3 solar cells. [ABSTRACT FROM AUTHOR]

Efficient electron transport layer-free perovskite solar cells (ETL-free PSCs) are promising designs because they offer low-cost, simpler device configuration and greatly promote the large area flexible application of PSCs. Meanwhile, compared to traditional PSCs with ETL, the development of ETL-free PSCs is hindered by their low performance due to serious interfacial energy loss. Herein, we reveal that ETL-free devices with relatively low carrier lifetimes of perovskite films exhibit more substantial photogenerated carrier loss, resulting in a lower electron-injection rate at the FTO (fluorine-containing tin oxide)/perovskite interface, which is mainly responsible for the performance loss. Moreover, we demonstrate that improving the carrier lifetimes of perovskite films can remedy the poor carrier extraction efficiency at the FTO/perovskite interface through three typical perovskite films. Similarly, for all-inorganic perovskite with lower carrier lifetime and hole transport layer-free devices, prolonging carrier lifetime may be an important measure to improve the device performance. Benefiting from this discovery, increasing the carrier lifetime of the perovskite films can counterbalance the inferior device interfaces, endowing the ETL-free PSCs with high performance close to that of the ETL devices. Our research provides insights into ETL-free PSCs and offers opportunities for high-performance ETL-free PSC device design. [ABSTRACT FROM AUTHOR]

In inverted perovskite solar cells, the [6,6]-phenyl-C61-butyric acid methyl ester (PCBM)/Ag back interface is quite important because serious recombination occurs and H2O/O2 directly attacks this interface to induce device instability. Here, bi-functional dipole layers are applied at the interface aiming at improving the charge transport and device stability simultaneously. Silane with -CF3 end group anchored on the PCBM surface induces more effective dipole effect than that with (CH2)7-CH3 end functional silane, bending the interface energy level to promote electron transport and reduce recombination. The hydrophobic nature of -CF3 also enhances the durability of the device. This work highlights the back surface dipole management method to achieve efficient and stable perovskite solar cells. [ABSTRACT FROM AUTHOR]

All-inorganic halide perovskites (AIHPs) have become one of the most promising materials for commercial perovskite photovoltaics owing to their enhanced efficiency and thermodynamic stability. Output instability, such as current hysteresis, is stressed in organic-inorganic hybrid perovskite photovoltaics but is neglected in AIHP solar cells. Here, the origin and suppression of current hysteresis in AIHP solar cells are addressed from a microscopic viewpoint. The incorporation of fullerene into AIHP films efficiently suppresses ion migration, which alleviates the macroscopic current hysteresis in solar cells. This result is confirmed by both Kelvin probe force microscopy and conductive atomic force microscopy measurements. Our results provide an advanced understanding of the microscopic properties of AIHPs but also clearly clarify how to suppress the macroscopic current hysteresis, which further inspires the optimization of solar cells up to the levels of organic–inorganic hybrid counterparts. [ABSTRACT FROM AUTHOR]

• Formation of (TMA) x FA 1-x Pb(PF 6) x I 3-x /FAPbI 3 heterojunction through interface ion exchange. • Strong hydrogen bonding and ion size effect stabilize the phase structure. • A champion efficiency of 21.43% was obtained with greatly enhanced device stability. Though formamidinium lead triiodide FAPbI 3 is hotly researched, it still suffers from chemical and phase instabilities, arising from inherent weak chemical bonding and easily transformed crystal configures respectively. This induces depraved opto-electronic properties and device instability, which is imperative to be solved. Here, chemical interaction enhancement in heterostructure of (TMA) x FA 1-x Pb(PF 6) x I 3-x /FAPbI 3 simultaneously improves the chemical and phase stability with preserving its inherent bandgap. Strong hydrogen bonding between PF 6 - and FA+ drastically reduces the α phase formation energy and diminishes the interface trap states. The resulting perovskite solar cells achieve improved efficiency of 21.43% compared with 19.32% of the control device. Meanwhile, ∼90% and 80% of the initial efficiency are maintained for unpacked devices after 1200 h storage (25 °C, 30% relative humidity) and 300 h maximum power point tracking (1 sun, 25 °C, N 2), outperforming the control one. This work highlights a robust interface construction method to overcome the inherent problem of FAPbI 3. [ABSTRACT FROM AUTHOR]

[Display omitted] • HEMA additive was added to the CsPbI 2 Br precursor solution to improve crystallization. • HEMA molecules could passivate defects and suppress charge recombination. • A champion efficiency of 16.13% was obtained with greatly enhanced device stability. CsPbI 2 Br all-inorganic perovskite has attracted considerable attention due to its high thermal stability and suitable bandgap, while the unsatisfactory crystallization quality and moisture instability significantly hinder its further application. Herein, a novel multifunctional liquid additive, 2-hydroxyethyl methacrylate (HEMA), is introduced into the CsPbI 2 Br precursor to ameliorate the above issues. Our results demonstrate that the functional groups of HEMA can interact with perovskite precursor, thus improving crystallization and passivating defects at the same time, and leading to a champion power conversion efficiency of up to 16.13%. Importantly, HEMA molecule in perovskite films will polymerize to a hydrophobic polymer at grain boundaries through breaking C = C bonds during the high temperature annealing process (160 °C). Moreover, this multifunctional liquid additive strategy endows perovskite films with promoted moisture tolerance by crosslinking perovskite grains and blocking moisture penetration, thus the unencapsulated device maintains 78% of its initial efficiency after aging at 30% relative humidity for 1000 h. These results demonstrate that the additive engineering with multifunctional molecule is applicable strategy for developing CsPbI 2 Br all-inorganic perovskite solar cells with both high efficiency and stability. [ABSTRACT FROM AUTHOR]