Search

Interfacial engineering of perovskite films has been the main strategies in improving the efficiency and stability of perovskite solar cells (PSCs). In this study, three new donor‐acceptor (D–A)‐type interfacial dipole (DAID) molecules with hole‐transporting and different anchoring units are designed and employed in PSCs. The formation of interface dipoles by the DAID molecules on the perovskite film can efficiently modulate the energy level alignment, improve charge extraction, and reduce non‐radiative recombination. Among the three DAID molecules, TPA‐BAM with amide group exhibits the best chemical and optoelectrical properties, achieving a champion PCE of 25.29 % with the enhanced open‐circuit voltage of 1.174 V and fill factor of 84.34 %, due to the reduced defect density and improved interfacial hole extraction. Meanwhile, the operational stability of the unencapsulated device has been significantly improved. Our study provides a prospect for rationalized screening of interfacial dipole materials for efficient and stable PSCs. [ABSTRACT FROM AUTHOR]

In the pursuit of highly efficient perovskite solar cells, spiro‐OMeTAD has demonstrated recorded power conversion efficiencies (PCEs), however, the stability issue remains one of the bottlenecks constraining its commercial development. In this study, we successfully synthesize a novel self‐polymerized spiro‐type interfacial molecule, termed v‐spiro. The linearly arranged molecule exhibits stronger intermolecular interactions and higher intrinsic hole mobility compared to spiro‐OMeTAD. Importantly, the vinyl groups in v‐spiro enable in situ polymerization, forming a polymeric protective layer on the perovskite film surface, which proves highly effective in suppressing moisture degradation and ion migration. Utilizing these advantages, poly‐v‐spiro‐based device achieves an outstanding efficiency of 24.54 %, with an enhanced open‐circuit voltage of 1.173 V and a fill factor of 81.11 %, owing to the reduced defect density, energy level alignment and efficient interfacial hole extraction. Furthermore, the operational stability of unencapsulated devices is significantly enhanced, maintaining initial efficiencies above 90 % even after 2000 hours under approximately 60 % humidity or 1250 hours under continuous AM 1.5G sunlight exposure. This work presents a comprehensive approach to achieving both high efficiency and long‐term stability in PSCs through innovative interfacial design. [ABSTRACT FROM AUTHOR]

Compared with inverted 3D perovskite solar cell (PSCs), inverted quasi-2D PSCs have advantages in device stability, but the device efficiency is still lagging behind. Constructing polymer hole-transporting materials (HTMs) with passivation functions to improve the buried interface and crystallization properties of perovskite films is one of the effective strategies to improve the performance of inverted quasi-2D PSCs. Herein, two novel side-chain functionalized polymer HTMs containing methylthio-based passivation groups are designed, named PVCz-SMeTPA and PVCz-SMeDAD, for inverted quasi-2D PSCs. Benefited from the non-conjugated flexible backbone bearing functionalized side-chain groups, the polymer HTMs exhibit excellent film-forming properties, well-matched energy levels and improved charge mobility, which facilitates the charge extraction and transport between HTM and quasi-2D perovskite layer. More importantly, by introducing methylthio units, the polymer HTMs can enhance the contact and interactions with quasi-2D perovskite, and further passivating the buried interface defects and assisting the deposition of high-quality perovskite. Due to the suppressed interfacial non-radiative recombination, the inverted quasi-2D PSCs using PVCz-SMeTPA and PVCz-SMeDAD achieve impressive power conversion efficiency (PCE) of 21.41% and 20.63% with open-circuit voltage of 1.23 and 1.22 V, respectively. Furthermore, the PVCz-SMeTPA based inverted quasi-2D PSCs also exhibits negligible hysteresis and considerably improved thermal and long-term stability. [ABSTRACT FROM AUTHOR]

Quasi‐2D perovskites with excellent stability have been recognized as an alternative to 3D counterparts for perovskite solar cells (PSCs). Although the power conversion efficiency (PCE) of quasi‐2D PSCs has increased over 18% by the compositional controlling and solvent engineering of perovskites, fewer studies have been conducted to exploit charge transport layers and investigate their interface relationships with quasi‐2D perovskites. To achieve high efficiency and good long‐term stability for quasi‐2D PSCs, hole‐transporting materials (HTMs) with matched energy levels and good chemical compatibility with quasi‐2D perovskites are explored and investigated. Herein, a novel non‐conjugated polymer based on polyethylene backbone, poly[3,6‐(4,4′‐dimethoxytriphenylamino)‐9‐vinyl‐9H‐carbazole] (PVCz‐OMeTPA), is easily synthesized and investigated as a promising dopant‐free HTM for quasi‐2D PSCs. Due to its more suitable energy levels, good hole mobility, as well as excellent film‐forming ability to assist the formation of high‐quality quasi‐2D perovskite films, the optimized p–i–n structured quasi‐2D PSCs based on PVCz‐OMeTPA exhibit the best PCE of 17.22%. The unencapsulated quasi‐2D PSCs based on PVCz‐OMeTPA maintain 82% of the initial efficiency after 1400 h under a relative humidity of ≈40% and sustain over 81% of the original efficiency after aging for 600 h upon 70 °C of continuous annealing. [ABSTRACT FROM AUTHOR]

Low-dimensional organometal halide perovskites have attracted more and more attention because of their good optoelectronic properties and improved stability compared to three-dimensional analogues. In this work, we investigated the charge separation mechanism in multiple quantum well (MQW) perovskite films, which are composed of a mixture of layered perovskites (or quantum wells) with different bandgaps. Despite inefficient dissociation of photo-generated excitons in large-bandgap quantum wells due to the large exciton binding energy, efficient charge separation can occur at the MQW perovskite/electron-extracted-layer interface via energy and/or charge transfer from large-bandgap quantum wells to small-bandgap quantum wells. The MQW perovskite solar cell exhibits a 25-fold improvement in device efficiency, as compared to a pure 2D analogue. [ABSTRACT FROM AUTHOR]

A new non-conjugated polymer (PVCz-OMeDAD) with good solution processability was developed to serve as an efficient dopant-free hole-transporting material (HTM) for perovskite solar cells (PSCs). PVCz-OMeDAD was simply prepared by the free-radical polymerization of vinyl monomers, which were synthesized from low-cost raw materials through three high-yield synthesis steps. The combination of the flexible non-conjugated polyvinyl main chain and hole-transporting methoxydiphenylamine-substituted carbazole side chains endowed PVCz-OMeDAD with excellent film-forming ability, a suitable energy level, and high hole mobility. As a result, by using an ultra-thin (≈30 nm) PVCz-OMeDAD film as cost-effective dopant-free polymer HTM, the conventional n-i-p-type PSCs demonstrated a power conversion efficiency (PCE) up to 16.09 %, suggesting the great potential of the polymer film for future low-cost, large-scale, flexible PSCs applications. [ABSTRACT FROM AUTHOR]

Solution-processable perovskites show highly emissive and good charge transport, making them attractive for low-cost light-emitting diodes (LEDs) with high energy conversion efficiencies. Despite recent advances in device efficiency, the stability of perovskite LEDs is still a major obstacle. Here, we demonstrate stable and bright perovskite LEDs with high energy conversion efficiencies by optimizing formamidinium lead iodide films. Our LEDs show an energy conversion efficiency of 10.7%, and an external quantum efficiency of 14.2% without outcoupling enhancement through controlling the concentration of the precursor solutions. The device shows low efficiency droop, i.e. 8.3% energy conversion efficiency and 14.0% external quantum efficiency at a current density of 300 mA cm−2, making the device more efficient than state-of-the-art organic and quantum-dot LEDs at high current densities. Furthermore, the half-lifetime of device with benzylamine treatment is 23.7 hr under a current density of 100 mA cm−2, comparable to the lifetime of near-infrared organic LEDs. Light-emitting diodes based on halide perovskites have made remarkable progress but their stability is the bottleneck. Here Miao et al. show 14% quantum efficiency at a current density of 300 mA cm-2 and 23.7 hr lifetime under a current density of 100 mA cm-2, making it promising for actual application. [ABSTRACT FROM AUTHOR]